AT&T 3.0 manual Select Audit Line

Checking Ports

Console Display/Instructions Additional Information PC

4 Select Audit Line.

B-Channel xxxx:		xxxx = slot and port number entered
Make	a selection	in Step 3.
Audit	Line
Audit	Call

Exit (F1)

The screen below appears only if the audit message is successfully created and sent.

BChannel xxxx Audit Line

Audit Initiated

xxxx= slot and port number entered in Step 3.

Exit

After about four minutes, check the error logs.

■If new PRI errors occur, contact your technical support organization for help on interpreting the results and your action.

■If no new PRI messages appear, the ends are most likely in agreement.

The screen below appears when the message cannot be sent due to signaling failure.

BChannel xxxx Audit Line

Audit Failed

xxxx= slot and port number entered in Step 3.

Exit

Central Office Problems 5-27