GAS Pipe Pressure, Testing, Louvre Installation

INSTALLATION

	GAS PIPE PRESSURE		Valve Description
	TESTING	1)	Gas on/off knob
The appliance must be isolated from the gas		2)	Manual high/low adjustment
The appliance must be isolated from the gas		3)	Pilot Adjustment
supply piping system by closing its individual		3)	Pilot Adjustment
manual shut-off valve during any pressure		4)	Thermocouple Connection
testing of the gas supply piping system at test		5)	Main Operator
pressures equal to or less than 1/2 psig. (3.45		6) Outlet Pressure Tap (Manifold Pressure)
kPa). Disconnect piping from valve at pressures		6) Outlet Pressure Tap (Manifold Pressure)
kPa). Disconnect piping from valve at pressures		7)	Inlet Pressure Tap (Supply Pressure)
over 3.45 kPa.		7)	Inlet Pressure Tap (Supply Pressure)
Themanifoldpressureiscontrolledbyaregulator		8)	Pilot Outlet
Themanifoldpressureiscontrolledbyaregulator		9)	Main Gas Outlet
built into the gas control, and should be checked		10) Flange Securing Screw Holes
at the pressure test point.		10) Flange Securing Screw Holes
at the pressure test point.		11) Alternative TC Connection Point
		11) Alternative TC Connection Point
Note: To properly check gas pressure, both		12) Thermoelectric Unit
	inlet and manifold pressures should
	be checked using the valve pressure
	ports on the valve.
1) Make sure the valve is in the "OFF" posi-
	tion.
2)	Loosen the "IN" and/or "OUT" pressure
	tap(s), turning counterclockwise with a 1/8"
	wide ﬂ at screwdriver.
3)	Attach manometer to "IN" and/or "OUT"
	pressure tap(s) using a 5/16" ID hose.
4)	Light the pilot and turn the valve to "ON"
	position. Read manometer.
5) The pressure check should be carried out
	with the unit burning and the setting should
	be within the limits speciﬁ ed on the safety
	label.
6)	When ﬁ nished reading manometer, turn
	off the gas valve, disconnect the hose and
	tighten the screw (clockwise) with a 1/8" ﬂ at
	screwdriver. Note: Screw should be snug,
	but do not over tighten

LOUVRE

INSTALLATION

Attach the top & bottom louvres to the side stove panel using 2 screws per side.

OPTIONAL

WALL THERMOSTAT

A wall thermostat may be installed if desired. Connect the wires as per the wiring diagrams. Note that the wires are connected to the "TH" on the gas valve. Use table below to determine the maximum wire length:

Note: Preferable if the thermostat is installed on an interior wall.

Regency® offers an optional programmable thermostat but any 250-750 millivolt rated non- anticipator type thermostat that is CSA, ULC or UL approved may be used.

CAUTION

Do not connect the millivolt

wall thermostat wires

to the 240V wires.

16	F37 Regency® Rear Flued Room Sealed Freestanding Gas Heater

F37-LPG, F37-NG specifications

The Regency F37-LPG and F37-NG are contemporary gas fireplaces that represent a perfect blend of modern design and efficiency, catering to both propane (LPG) and natural gas (NG) needs. These models are engineered to enhance living spaces while providing optimal warmth and comfort. Their elegant appearance and advanced technologies make them a popular choice for homeowners seeking an aesthetically pleasing and functional heating solution.

One of the key features of the Regency F37 series is its large viewing area, which allows for an unobstructed view of the flames, creating a visually stunning focal point in any room. The fireplace's design includes a clean front and minimalistic aesthetics that can complement various interior styles, from traditional to contemporary. The F37 offers an array of customizable options, including various finishes, decorative media, and fireplace configurations.

Technologically, the Regency F37 is equipped with an advanced burner system that enhances the flame presentation while maintaining high efficiency. The system produces realistic flames and glowing embers, emulating the look of a traditional wood-burning fire without the hassle of real wood. Additionally, the fireplaces feature a precise control system, allowing users to adjust the flame height and heat output according to their preferences.

In terms of efficiency, the F37 series boasts impressive energy ratings, ensuring that homeowners can enjoy warmth without incurring excessive costs. The fireplaces are designed with an emphasis on heat retention, utilizing modern insulation and venting technologies that promote optimal performance. With a focus on environmental sustainability, Regency ensures that their units produce lower emissions, making the F37 series an eco-friendly choice for heating.

The ease of installation is another significant advantage of the Regency F37, with flexible venting options designed to accommodate various home layouts. Whether it is an existing space or a new construction, the fireplace can be adapted to meet specific design and functionality needs.

In summary, the Regency F37-LPG and F37-NG are exceptional gas fireplaces that combine striking design with cutting-edge technology. Their large viewing areas, customizable options, high efficiency, and eco-friendly features make them an excellent addition to any home, ensuring comfort and style for years to come.

INSTALLATION