Regency U35-LP1 LOG Installation, Faceplate & Trim Installation, Rear View Trim Assembly Diagram

Page 11

INSTALLATION

LOG INSTALLATION

WARNING: Dangerous operating conditions may occur if these logs are not positioned in their correct certified locations. Read the following instructions carefully and refer to the attached diagram.

1) Remove the logs from the box and carefully unwrap them. The logs are fragile, handle with care. Do not force into position.

2)Sprinkle the vermiculite and ember on the

sides of the firebox base.

3) Place the rear log on the rear log support at the back of the unit with the flat side of the log facing the back of the unit. Gently push the log down onto the pins.

Rear View: Faceplate Assembly

Diagram 1

5) Separate platinum embers (supplied with packaged manual) and spread loosely in front of and inbetween the front logs and in front of the rear log on the burner. Avoid stacking platinum embers.

6) Install the door and louvers.

4)Place the front logs in the unit, aligning the holes on the underside of the logs with the log support pins in the front of the unit. Carefully push the logs down onto the pins.

(Hint: Install the front right side first.)

FACEPLATE & TRIM

INSTALLATION

1)Lay the faceplate panels flat, face down on something soft so they don't scratch.

2)Take the top faceplate and align the holes in it with the holes in the side panels. Using the screws provided, attach from the top of the panel (the holes in the top panel are slightly larger than the holes in the side panel to facilitate easier installation). Diagram 1.

Hint: Don't tighten the screws down completely at this point, continue on with steps 3 and 4 and do a trial fit to the unit. Make any necessary adjustments and when it fits properly then tighten down the screws.

3)Using the connectors provided, join the left side trim (with the ON/OFF switch) to the top trim. Diagram 2. Connect the right side trim to the top trim.

4)Place the trim on the assembled faceplate panels, aligning the wire connections from the switches with the notch on the left side panel.

Rear View: Trim Assembly

Diagram 2

5)Connect the fan switch wires by taking the black and red wires with the male ends (in the grey harness) and connect them with the wire connectors from the fan speed control.

6)Connect the ON/OFF switch wires by taking the black and red wires with the female ends and connect them to the ON/OFF switch.

7)Tuck the wires into the faceplate to keep them away from the insert using the clip provided. Attach the clip to the rear of the faceplate to ensure that the wires do not touch the side of the unit.

Diagram 3.

8)The power cord should be run behind the faceplate panel.

U35 FPI Direct Vent Gas Insert

11

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents U35 Gas Insert U35 FPI Direct Vent Gas Insert FPI GAS Fireplace InsertTable of Contents Safety Label MA Code CO Detector RequirementsInstallation Materials Required Installation ChecklistMinimum Fireplace Dimensions Minimum Clearances to Combustibles Venting Flue Liner InstallationGAS Connection SIT Valve Description GAS Pipe Pressure TestingGAS Insert Aeration System Optional Brick PanelHint Install the front right side first LOG InstallationFaceplate & Trim Installation Rear View Faceplate Assembly DiagramHinge Location Bottom Louver Standard Flush DoorOptional Flush Trim Flush LouversBAY Louvers Optional BAY DoorOptional BAY Trim Double Screen DoorsBlanking Plate Tabs Kensington Front Screw Kensington Front InstallationKensington Front Screws Glass Door Sub-Frame Hook Panel Door InstallationFull Screen Doors Hinge Wiring Diagrams Thermostat Optional Remote Control Optional WallOperating Instructions Normal Operating Sounds GAS Appliances Copy of Lighting Instruction PlateAutomatic Convection FAN Operation Maintenance Door Glass FAN MaintenanceFlush Glass Replacement Bay Glass ReplacementShut off the gas supply Removing ValveReplacing fan Left Valve Bracket Right Installing ValveMain Assembly Parts ListBurner & LOG Assembly Flush Front Flush Door and BAY Front AssemblyBay Front FACEPLATES, TRIMS, and Hearths Parts ListU35 FPI Direct Vent Gas Insert Conditions WarrantyInstaller Please complete the following information

U35-NG1, U35-LP1 specifications

The Regency U35-LP1 and U35-NG1 are cutting-edge gas fireplace inserts designed to elevate both the aesthetic and functional appeal of any home. Both models represent a blend of modern technology and classic design, making them perfect for those who desire warmth without sacrificing style.

One of the main features of the Regency U35 series is its impressive heat output. With the capability of delivering up to 30,000 BTUs, these inserts efficiently heat medium to large spaces, ensuring comfort even in the coldest months. The U35-LP1 operates on propane, while the U35-NG1 utilizes natural gas, providing flexibility in fuel choice based on the homeowner's needs.

Another distinctive characteristic of the U35 fireplace inserts is their large viewing area, featuring a panoramic glass front that maximizes the fire's visibility. This design is not only visually appealing but also adheres to safety standards, as the glass remains cool to the touch, making it suitable for households with children or pets. The flame presentation is further enhanced by the realistic logs and ember bed, creating an inviting ambiance that replicates a traditional wood-burning fire.

Technologically, these fireplaces are equipped with advanced features such as a programmable remote control, enabling users to adjust the flame height and heat output with ease. Additionally, the inserts come with an optional wall switch control, providing further convenience in managing the fire. Energy efficiency is another hallmark of the U35 series, as they meet or exceed the EPA's standards, ensuring minimal emissions and lower energy costs.

Installation is simplified thanks to the flexible venting options available with both models. Homeowners can choose from straight, horizontal, or vertical venting configurations, making it easier to integrate the fireplace into various home layouts. Furthermore, both models come with a limited lifetime warranty, reflecting Regency's commitment to quality and reliability.

In conclusion, the Regency U35-LP1 and U35-NG1 are exceptional gas fireplace inserts that combine aesthetic elegance with functional efficiency. With their impressive heat output, user-friendly controls, and stylish designs, they stand out as exceptional choices for anyone looking to enhance their living space with the warmth and charm of a beautiful fire.
Top Page Image Contents