Regency U35-LP1, U35-NG1 installation manual Optional Remote Control Optional Wall, Thermostat

Page 19

INSTALLATION

For PROPANE Units and Units Equipped with DC Spark Boxes

OPTIONAL REMOTE CONTROL

OPTIONAL WALL

Use the FPI Remote Control Kit approved for this unit. Use of other systems may void your warranty.

The remote control kit comes with a hand held transmitter, a receiver and a wall mounting plate.

1)Choose a convenient location on the wall to install the receiver and the receptacle box (protection from extreme heat is very important). Run wires from the fireplace to that location. Use Thermostat Wire Table.

2)Connect the wires as per the wiring diagrams below.

CAUTION

Do not connect the millivolt

remote control wires

to the 120V wires.

3)Install 3 AAA alkaline batteries in transmitter and 4 AA alkaline batteries in the receiver. Install the receiver and its cover in the wall. Switch the remote receiver to "remote" mode. The remote control is now ready for operation.

THERMOSTAT

A wall thermostat may be installed if desired, follow the wiring diagram below. Note: the wires are connected to the "TH" on the gas valve. Use the table below to determine the maximum wire length. FPI offers an optional programmable thermostat but any 250-750 millivolt rated non- anticipator type thermostat that is CSA, ULC or UL approved may be used.

It is recommended that the thermostat be installed on an interior wall.

CAUTION

Do not connect the millivolt

wall thermostat wires

to the 120V wires.

U35 FPI Direct Vent Gas Insert

19

 

Image 19
Contents U35 Gas Insert U35 FPI Direct Vent Gas Insert FPI GAS Fireplace InsertTable of Contents Safety Label MA Code CO Detector RequirementsInstallation Minimum Fireplace Dimensions Installation ChecklistMaterials Required Minimum Clearances to Combustibles GAS Connection Flue Liner InstallationVenting SIT Valve Description GAS Pipe Pressure TestingGAS Insert Aeration System Optional Brick PanelHint Install the front right side first LOG InstallationFaceplate & Trim Installation Rear View Faceplate Assembly DiagramHinge Location Bottom Louver Standard Flush DoorOptional Flush Trim Flush LouversBAY Louvers Optional BAY DoorOptional BAY Trim Double Screen DoorsKensington Front Screws Kensington Front InstallationBlanking Plate Tabs Kensington Front Screw Glass Door Sub-Frame Hook Panel Door InstallationFull Screen Doors Hinge Wiring Diagrams Thermostat Optional Remote Control Optional WallOperating Instructions Automatic Convection FAN Operation Copy of Lighting Instruction PlateNormal Operating Sounds GAS Appliances Maintenance Door Glass FAN MaintenanceFlush Glass Replacement Bay Glass ReplacementReplacing fan Removing ValveShut off the gas supply Left Valve Bracket Right Installing ValveMain Assembly Parts ListBurner & LOG Assembly Bay Front Flush Door and BAY Front AssemblyFlush Front FACEPLATES, TRIMS, and Hearths Parts ListU35 FPI Direct Vent Gas Insert Conditions WarrantyInstaller Please complete the following information

U35-NG1, U35-LP1 specifications

The Regency U35-LP1 and U35-NG1 are cutting-edge gas fireplace inserts designed to elevate both the aesthetic and functional appeal of any home. Both models represent a blend of modern technology and classic design, making them perfect for those who desire warmth without sacrificing style.

One of the main features of the Regency U35 series is its impressive heat output. With the capability of delivering up to 30,000 BTUs, these inserts efficiently heat medium to large spaces, ensuring comfort even in the coldest months. The U35-LP1 operates on propane, while the U35-NG1 utilizes natural gas, providing flexibility in fuel choice based on the homeowner's needs.

Another distinctive characteristic of the U35 fireplace inserts is their large viewing area, featuring a panoramic glass front that maximizes the fire's visibility. This design is not only visually appealing but also adheres to safety standards, as the glass remains cool to the touch, making it suitable for households with children or pets. The flame presentation is further enhanced by the realistic logs and ember bed, creating an inviting ambiance that replicates a traditional wood-burning fire.

Technologically, these fireplaces are equipped with advanced features such as a programmable remote control, enabling users to adjust the flame height and heat output with ease. Additionally, the inserts come with an optional wall switch control, providing further convenience in managing the fire. Energy efficiency is another hallmark of the U35 series, as they meet or exceed the EPA's standards, ensuring minimal emissions and lower energy costs.

Installation is simplified thanks to the flexible venting options available with both models. Homeowners can choose from straight, horizontal, or vertical venting configurations, making it easier to integrate the fireplace into various home layouts. Furthermore, both models come with a limited lifetime warranty, reflecting Regency's commitment to quality and reliability.

In conclusion, the Regency U35-LP1 and U35-NG1 are exceptional gas fireplace inserts that combine aesthetic elegance with functional efficiency. With their impressive heat output, user-friendly controls, and stylish designs, they stand out as exceptional choices for anyone looking to enhance their living space with the warmth and charm of a beautiful fire.