6 | Specifications |
|
|
| Heating Specifications: |
|
|
| Approximate Maximum Heating Capacity (in square feet)* | 800 to 2,250 Sq. Feet | |
| Burn Rate (Pounds per Hour)** | 1.7 to 5.5 | |
| Maximum Burn Time on Low Burn** | 47 Hours | |
| Hopper Capacity | 80 Pounds |
*Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside temperature. It is alsoaffected by the fuel size, quality, and moisture level.
**Small pellets will increase or decrease the stated burn rates and burn times. Differences of plus or minus 20% depending on fuel quality may occur.
Dimensions:
This tab can be bent out and used to hang the scraper rod tool.
| 13" | |
32" | 4" | |
Diameter | ||
| ||
| Exhaust |
Air Inlet
25" | 23" |
| Weight: 225 Lbs. |
Electrical Specifications:
Electrical Rating | 115 Volts, 3.6 Amps, 60 Hz |
Watts During | 400 (approximately) |
Watts During Operation | 180 (approximately) |
Fuel:
The unit is designed for wood pellets that comply with the standards set by the Association of Pellet Fuel Industry (density of at least 40 lbs. per cubic foot, 1/4" to 5/16" diameter, length no greater than
N O T E: This heater may use alternative fuel if equipped with the
EPA Compliance:
This heater has been tested exempt from EPA Phase II Requirements by OMNI Test Labs.
Travis Industries | 4050418 | 1 0 0 - 0 1 1 5 6 |