Regency E21-NG1, E21-LP1 Flush Glass, Power cord should be run behind the faceplate panel, Switch

Page 13

INSTALLATION

7)Tuck the wires into the faceplate to keep them away from the insert using the clip provided. Attach the clip to the rear of the faceplate to ensure that the wires do not touch the side of the unit. See diagram 3.

FLUSH GLASS

1)Install the bottom glass trim onto the glass support.

2)Slide the glass into the bottom glass trim and secure with the glass clips using the 2 phillips head screws at the top.

3)Slide the top glass trim by sliding under the two spring clips.

Note: To re-install the glass, reverse the procedure.

Hearth Trim Option: Hearth Trim is an option that can be used to finish off the installation when the bottom of the fi replace is higher than the hearth or to raise the fi replace. Lay the faceplate side panels fl at, face down on something soft so they don't scratch. Attach the Hearth Trim to the bottom of the faceplate side panels with the screws provided. See Diagram 2. Now attach the assembled pieces to the insert body.

3)Using the connectors provided, join the left side trim (with the ON/OFF switch) to the top trim. See diagram 2. Connect the right side trim to the top trim.

4)Place the trim on the assembled faceplate panels, aligning the wire connections from the switches with the notch on the left side panel.

5)Connect the fan switch wires by taking the black and red wires with the male ends (in the grey harness) and connect them with the wire connectors from the fan speed control.

Diagram 3

8)The power cord should be run behind the faceplate panel.

9)Attach the brass trim to the faceplate by drilling a 1/8" hole through into the faceplate using the hole in the trim as a guide. Fasten the trim to the faceplate panels using the gold plated screws. See diagram 4.

Diagram 4

10)Attach the faceplate panels to the insert body using the 4 remaining black screws. See diagram 5.

11)Push the logo plate into the two holes in the bottom left corner of the faceplate. See diagram 4.

WARNING

The use of substitute glass will void all product warranties.

Diagram 2

6) Connect the ON/OFF switch wires by taking

the black and red wires with the female

ends and connecting them to the ON/OFF

Do not operate the appliance if the glass panel(s) are removed, cracked or broken. Replacement of the glass panel(s) should be done by a qualified

switch.

Diagram 5

service person.

Regency E21 Gas Fireplace Insert

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 918-354a 10/25/05 E21 Gas InsertYou are the owner of a state-of-the-art Gas Insert by CongratulationsTable of Contents Approved for bedroom installations Safety LabelFor the State of Massachusetts, installation Save These Instructions InstallationBefore YOU Start Minimum Fireplace Clearances Installation ChecklistIf the framing is made of metal studs covered with a non Clearances to CombustiblesCombustible board High Elevation GAS ConnectionSystem Data Natural Gas Propane Burner #43 #54Grounding Wiring Diagram for the E21-NG1 and E21-LP1Lug Detail Offset Flue Adaptor GAS Pipe Pressure TestingVenting Test for Flue Spillage GAS Insert Aeration SystemOptional Brick Panel Valve DescriptionFaceplate & Trim Installation LOG SET InstallationPlace the Front Left Log B 02-67 on the 2 front pins A02-66 D02-70 C02-68 B02-67 E02-69Switch Power cord should be run behind the faceplate panelFlush Glass Flush Louvers Are different. See diagram belowBAY Louvers Conversion Kit from Natural Gas to Propane Model #533-969 Installation Full Screen Front Close screen doors Connect the two wires to the gas valve. See diagram below Thermostat Wire TableWire Size Wall ThermostatOperating Instructions Copy of Lighting Plate Instructions For Your Safety Read Before LightingMaintenance Removing Valve Assembly Door Glass ReplacementFlush Glass Replacement Removing the FANDescription Parts ListBurner Assembly & LOG SET Flush Door Bay DoorFaceplate Standard-Contour-Top Faceplate Standard-Contour- Side RightFaceplate Standard-Contour- Side Left Faceplate Standard-Contour- Trim RightRegency E21 Gas Fireplace Insert Regency E21 Gas Fireplace Insert Regency E21 Gas Fireplace Insert Conditions WarrantyInstaller Please complete the following information

E21-NG1, E21-LP1 specifications

The Regency E21-LP1 and E21-NG1 are premium gas fireplaces that embody the essence of modern heating technology while offering unparalleled aesthetic appeal. Designed to meet the demands of today’s homeowners, these models combine efficiency, style, and innovative features to elevate any living space.

One of the standout characteristics of the E21 series is its sleek design, which integrates seamlessly into a variety of home decors. Both the E21-LP1 and E21-NG1 are designed for liquid propane and natural gas respectively, ensuring versatility in fuel options. Their clean lines and minimalist profile make them an attractive focal point, perfect for modern, contemporary, or transitional interiors.

These gas fireplaces feature advanced heating technology, providing robust warmth quickly and efficiently. The E21 models are equipped with an impressive direct vent system that ensures optimal performance while maintaining indoor air quality. This means that the fireplace pulls air from the outside for combustion and vents exhaust back outside, allowing for ventilation without compromising on comfort.

Energy efficiency is a key characteristic of the Regency E21 models. They boast a high efficiency rating, which translates into lower heating costs and reduced environmental impact. The innovative burner design enhances flame presentation, providing a realistic and inviting fire that enhances the ambiance of any room.

Ease of use is also a significant benefit of the E21-LP1 and E21-NG1. With an intuitive control panel, users can easily manage the flame height and adjust the heat output to suit their needs. Many homeowners appreciate the convenience of remote control operation, allowing them to adjust their fireplace settings from the comfort of their seat.

Safety features are paramount in the design of the E21 models. Each fireplace is equipped with standard safety mechanisms, including an automatic shut-off system that activates in the event of a malfunction. This provides peace of mind for users, ensuring that their heating source is both effective and secure.

In summary, the Regency E21-LP1 and E21-NG1 offer a blend of modern design, advanced technology, and high efficiency, making them ideal choices for anyone looking to invest in a reliable and stylish gas fireplace. With an emphasis on user-friendly features and safety, they promise to deliver warmth and comfort for years to come.
Top Page Image Contents