Regency E21-NG1, E21-LP1 Conversion Kit from Natural Gas to Propane Model #533-969

Page 15

INSTALLATION

Conversion Kit from Natural Gas to Propane Model #533-969

THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER

IF IN DOUBT DO NOT DO THIS CONVERSION !!

1)Turn the unit off and allow it to cool to room temperature.

2)Shut off gass supply

3)Unplug or disconnect power source to stove.

4)Remove glass front (see manual).

5)Remove logs and brick panels (if installed).

6)Remove the Grate by removing the screws on each side of the grate.

8)Pull off the pilot cap to expose the pilot orifi ce.

9)Unscrew the pilot orifi ce with the allen key (provided) and replace with the LP pilot orifi ce in the kit.

Remove the 2 screws holding the grate in position.

7)Remove the Burner Tray by removing 1 screw on each side of the tray, then slide the tray to the left and lift out.

10) Remove burner orifi ce with 1/2" wrench. Use another wrench to hold onto the elbow behind the offi ceReplace with the #54 orifi ce in the Kit.

Remove the 2 screws,

push Burner Tray to the left, and lift off.

Burner

Orifi ce

Regency E21 Gas Fireplace Insert

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 918-354a 10/25/05 E21 Gas InsertYou are the owner of a state-of-the-art Gas Insert by CongratulationsTable of Contents Safety Label Approved for bedroom installationsFor the State of Massachusetts, installation Installation Save These InstructionsBefore YOU Start Minimum Fireplace Clearances Installation ChecklistClearances to Combustibles If the framing is made of metal studs covered with a nonCombustible board Natural Gas Propane Burner #43 #54 GAS ConnectionHigh Elevation System DataWiring Diagram for the E21-NG1 and E21-LP1 GroundingLug Detail GAS Pipe Pressure Testing Offset Flue AdaptorVenting Valve Description GAS Insert Aeration SystemTest for Flue Spillage Optional Brick PanelA02-66 D02-70 C02-68 B02-67 E02-69 LOG SET InstallationFaceplate & Trim Installation Place the Front Left Log B 02-67 on the 2 front pinsPower cord should be run behind the faceplate panel SwitchFlush Glass Are different. See diagram below Flush LouversBAY Louvers Conversion Kit from Natural Gas to Propane Model #533-969 Installation Full Screen Front Close screen doors Wall Thermostat Thermostat Wire TableConnect the two wires to the gas valve. See diagram below Wire SizeOperating Instructions Copy of Lighting Plate Instructions For Your Safety Read Before LightingMaintenance Removing the FAN Door Glass ReplacementRemoving Valve Assembly Flush Glass ReplacementDescription Parts ListBurner Assembly & LOG SET Flush Door Bay DoorFaceplate Standard-Contour- Trim Right Faceplate Standard-Contour- Side RightFaceplate Standard-Contour-Top Faceplate Standard-Contour- Side LeftRegency E21 Gas Fireplace Insert Regency E21 Gas Fireplace Insert Regency E21 Gas Fireplace Insert Conditions WarrantyInstaller Please complete the following information

E21-NG1, E21-LP1 specifications

The Regency E21-LP1 and E21-NG1 are premium gas fireplaces that embody the essence of modern heating technology while offering unparalleled aesthetic appeal. Designed to meet the demands of today’s homeowners, these models combine efficiency, style, and innovative features to elevate any living space.

One of the standout characteristics of the E21 series is its sleek design, which integrates seamlessly into a variety of home decors. Both the E21-LP1 and E21-NG1 are designed for liquid propane and natural gas respectively, ensuring versatility in fuel options. Their clean lines and minimalist profile make them an attractive focal point, perfect for modern, contemporary, or transitional interiors.

These gas fireplaces feature advanced heating technology, providing robust warmth quickly and efficiently. The E21 models are equipped with an impressive direct vent system that ensures optimal performance while maintaining indoor air quality. This means that the fireplace pulls air from the outside for combustion and vents exhaust back outside, allowing for ventilation without compromising on comfort.

Energy efficiency is a key characteristic of the Regency E21 models. They boast a high efficiency rating, which translates into lower heating costs and reduced environmental impact. The innovative burner design enhances flame presentation, providing a realistic and inviting fire that enhances the ambiance of any room.

Ease of use is also a significant benefit of the E21-LP1 and E21-NG1. With an intuitive control panel, users can easily manage the flame height and adjust the heat output to suit their needs. Many homeowners appreciate the convenience of remote control operation, allowing them to adjust their fireplace settings from the comfort of their seat.

Safety features are paramount in the design of the E21 models. Each fireplace is equipped with standard safety mechanisms, including an automatic shut-off system that activates in the event of a malfunction. This provides peace of mind for users, ensuring that their heating source is both effective and secure.

In summary, the Regency E21-LP1 and E21-NG1 offer a blend of modern design, advanced technology, and high efficiency, making them ideal choices for anyone looking to invest in a reliable and stylish gas fireplace. With an emphasis on user-friendly features and safety, they promise to deliver warmth and comfort for years to come.
Top Page Image Contents