Precor P80 manual Weekly Maintenance, Monthly Maintenance

Page 109

Maintenance

51

Weekly Maintenance

Perform the following maintenance tasks every week:

1.Disconnect the external power supply.

2.Clean the ramps and wheels with water or an approved cleaner.

3.Inspect the power cord to verify that it is not pinched under the equipment or between any two moving parts.

4.Clean the floor under the equipment using a vacuum cleaner or a damp mop.

5.When the floor is completely dry, reconnect the power.

6.Test all console functions, including heart rate monitoring features.

7.Verify that the unit sits squarely on the floor. All of its feet should be touching the floor and the unit should not rock or wobble when in use. If not, re-level it as described in Leveling the EFX.

Monthly Maintenance

DANGER USE EXTREME CAUTION when the rear cover of any EFX is removed. Serious injury could result if fingers are pinched between the flywheel spokes, cranks, movable arms, and the drive weldment. Securing the movable arm to the crank with a clamp is recommended. Be aware of other people within your work area who might cause the arm to move.

Perform the following maintenance tasks every month:

1.Clean the frame, cover and arms with water or an approved cleaner.

2.Wipe the exterior of the console with a damp sponge or soft cloth, and dry with a clean towel. Keep water away from electronic components to prevent electrical shock or damage.

3.Clean the touchscreen using a soft, lint-free cloth dampened with a 91% isopropyl alcohol solution (either as sold or diluted with an equal amount of water).

4.Remove the rear cover. Vacuum out any debris, being careful not to bring the vacuum cleaner nozzle too close to any circuit board (unless your vacuum cleaner is protected against static buildup).

Image 109
Contents Operating and Maintaining the P80 Console Page Operating and Maintaining the P80 Console Trademark Note Edition InformationIntellectual Property Notice Page Safety Precautions Important Safety InstructionsOperating and Maintaining the P80 Console yProper Location for Equipment Hazardous Materials and Proper Disposal Regulatory Notices for the RFID Module Product Recycling and DisposalRadio Frequency Interference RFI Federal Communications Commission, PartEuropean Applications Industry CanadaNMB-003du Canada Cardiovascular Type Equipment Safety Approvals for Cardiovascular EquipmentPVS and P80 Regulatory Notice Radio Frequency Interference RFIEuropean Applications Industry CanadaICES-003 NMB-003du CanadaPage Figure 3: IEC-320C13 and C14 plugs Obtaining ServiceTable of Contents Operating and Maintaining the P80 Console Chapter Getting StartedFigure 4: P80 console keys Identifying Parts of the ConsoleTable 1. Key descriptions for the P80 console Number Key NameFigure 5: Restart switch Using the Treadmill Safety ClipPage Treadmill Auto Stop Automatic Stop Function Operating and Maintaining the P80 Console Chapter Configuring the System Settings1 2 3 To view the System menu5 6 5 1 5 6 About To view the System Info settings menuSetting Equipment UsageAccess Admin/TechTo view the Usage settings System Settings2.Touch Equipment Usage Connectivity 2.Touch System Settings, then touch ConnectivityTo view connectivity information Table 4. Connectivity settings2.Touch System Settings, then touch Display To view the Display settingsDisplay To view TV Setting information TV Settings2.Touch System Settings 1.Touch System SettingsTo delete a channel from the Channel Guide Workout LimitsTable 7. Workout Limits settings To modify the Workout Limits settingsSetting Name Setting OptionsTo manage settings Manage SettingsPage yImportant Safety Instructions Using the Touch Heart Rate FeatureyUsing the Safety Clip for treadmill only Introducing Users to the P80 ConsoleFigure 9: Heart rate target zones Heart Rate Target ZonesTo use a chest strap transmitter Using a Chest Strap TransmitterChanging Screen Views Using the View Channels and View ButtonsyPress Quick Start To change viewsTo choose a media source Using the Media PanelFigure 11: Media icon Table 8. Media buttonsTo connect your iPod Connecting and Using Your iPodTo return to the Workout Progress panel Using the Workout Progress PanelFigure 13: Workout Progress icon Table 9. Workout Progress buttonsPage Starting a QuickStart Workout Beginning Your WorkoutTo begin exercising immediately 1.Touch Quick StartStarting a Preset Workout Starting a Featured WorkoutTo begin a preset workout Workout panelTo enter your personal settings Personal Information and Progress SettingsEnding a Workout Default SettingAccess Admin/TechFigure 15: Adjust motion controls up or down Adjusting the Workout IntensityFigure 14 Motion controls Viewing Your Workout Status While Exercising Low Fitness Level Scoring Your Fitness WorkoutMedium Fitness Level High Fitness LevelPage Cleaning the Console and Display MaintenanceTo clean the screen To remove dust and dirt from the consoleImportant: Do not use any acidic cleaners. Doing so will weaken the paint or powder coatings and void the Precor Limited Warranty. Never pour water or spray liquids directly on the console or console’s screen Page 20031 142nd Avenue NE Precor Incorporated27 June P.O. BoxEFX 883 • EFX 833 • EFX Page Page Trademark Note Edition InformationIntellectual Property Notice P/N 300712-341rev GSafety Precautions Important Safety InstructionsRead all instructions in the documentation provided with your exercise equipment, including all assembly guides, user guides, and owner’s manuals, before installation of this device Do not allow children, or people unfamiliar with the operation of this equipment, on or near it. Do not leave children unsupervised around the equipment Proper Location for Equipment Hazardous Materials and Proper Disposal Educating UsersRegulatory Notices for the RFID Module Product Recycling and DisposalRadio Frequency Interference RFI Industry Canada Federal Communications Commission, Partthe equipment ATTENTION: Haute TensionEuropean Applications Safety Approvals for Cardiovascular EquipmentCardiovascular Type Equipment PVS and P80 Regulatory NoticeFederal Communications Commission, Part Radio Frequency Interference RFIIndustry Canada European ApplicationsFigure 1: IEC-320C13 and C14 plugs Obtaining ServiceObtaining Updated Documentation Regulatory Notices for Cardiovascular Table of ContentsSymptoms of a Low Battery Self-PoweredFeaturesUsing the Optional Power Adapter The Optional Power Adapter KitAssembling the EFX To prepare the EFX for assemblyChapter Hardware Kit not to scale Installation RequirementsFasteners Inner handrail cap Center cross bar cap Outer handrail capHandlebar bolt wrench To begin assembly Performing the AssemblyRequired Tools Figure 3: Route the cable Figure 5: EFX cable path Figure 6: Cable connection points inside EFX base Figure 7: Lift cover replacement Figure 8: Rear view of console attachment To mount the center column support on the frameFigure 9: Attachment of center column support To tighten the fasteners properlyFigure 10 Fastener attachment detail 2.Fully tighten the fasteners on the back of each upright support Important: Attach one handlebar at a time To attach the handlebarsFigure 16: Handrail attachment detail To tighten the handlebars completely4. Attach the outer handlebar caps To attach the upright support covers To attach the water bottle holderFigure 19: Water bottle attachment To level the unit Leveling the EFXBreaking in the Equipment Threading the Cable Assembly P80 Installing the ConsoleChapter 2.Position the console over the console mount To thread the cable assemblyFigure 23: Console positioning on base unit Installing the ConsoleFigure 24: Cable connections, P80 console Connecting Cables P80Table 1. P80 internal cable connections Connector TypeCable CircuitTo connect the television cable Connecting the Television CableConnecting the Ethernet and Base Unit Data Cables Connecting the Power Cable Connecting the Heart Rate Sensor CableFigure 27: Connecting the heart rate cable Figure 28: Connecting the power cableTo complete the installation Completing the Console Installation P80To thread the cable assembly Threading the Cable Assembly P30 and P20Figure 30: Console positioning on base unit Figure 31: Cable connections, P30 console Connecting Cables P30Table 2. P30 internal cable connections Connector TypeCable LocationConnector Type Connecting Cables P20Figure 32: Cable connections, P20 console Table 3. P20 internal cable connectionsTo complete the installation Completing the Console Installation P30 and P20 1.Begin exercising on the equipment Maintenance Daily CleaningChapter Daily Inspection Monthly Maintenance Weekly MaintenanceMoving the Equipment Storing the Chest StrapLong-TermStorage Chapter Self-PoweredFeaturesTable 4. Minimum requirements for operation Rate of MotionInformational Displays Prior to Shutdown Symptoms of a Low BatteryThe Optional Power Adapter Kit Using the Optional Power AdapterSelf-PoweredFeatures Replacing the Battery Warranty Periods and Coverage Limited WarrantyChapter Conditions and Restrictions Exclusive Remedies Complete this portion and keep for your records EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGESExample: Dealer or store name Example: Dealer or store telephone numberPage Precor Incorporated Warranty #36286-11420031 142nd Avenue NE P.O. Box
Related manuals
Manual 29 pages 33.26 Kb Manual 136 pages 32.15 Kb Manual 126 pages 63.35 Kb Manual 136 pages 42.92 Kb Manual 136 pages 61.49 Kb Manual 116 pages 19.75 Kb Manual 112 pages 31.8 Kb Manual 120 pages 46.42 Kb