Precor P80 Using the View Channels and View Buttons, Changing Screen Views, yPress Quick Start

38 Operating and Maintaining the P80 Console

Using the View Channels and View Buttons

There are three primary screen views that make certain information visible during your workout. You can change the look and information provided on the screen by at anytime using the Views button.

yWorkout View – Shows panels, icon bar, and the status bar. This view allows you to focus fully on your workout.

yStatus View – Shows only the status bar and icon bar, leaving the center of the console for media viewing.

yMedia View – Shows only media and the Views and Channel buttons. This view allows you to fully focus on media.

Note: The name of the Channels button changes depending on the media you are using. For example, if you are watching a workout guide, the name of the button will be Videos.

Changing Screen Views

The Views icon appears at the bottom right of the workout screen when the Personal Progress panel is visible.

Figure 10: Views icon

To get to this panel:

yPress Quick Start.

yPress Workouts, choose a preset workout, and then press GO.

ySelect the Featured Workout on the Welcome screen by pressing GO.

To change views:

1.The default view is the Workout View. Slide the panels side to side on the screen to see the media panel.

2.Press Views two times to see the Status view.

3.Press Views a third time to make the Status Bar disappear leaving only the Media view.