Nilfisk-Advance America SW 700S P Manual Purpose and Contents, Target, Identification Data

Page 44

ENGLISH

USER MANUAL

INTRODUCTION

NOTE

The numbers in brackets refer to the components shown in Machine Description chapter.

MANUAL PURPOSE AND CONTENTS

The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal. Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. Contact Nilfisk-Advance in case of doubts regarding the interpretation of the instructions and for any further information.

TARGET

This Manual is intended for operators and technicians qualified to perform the machine maintenance.

The operators must not carry out procedures reserved for qualified technicians. Nilfisk-Advance will not be answerable for damages coming from the non-observance of this prohibition.

HOW TO KEEP THIS MANUAL

The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause damage to it.

DECLARATION OF CONFORMITY

The declaration of conformity, supplied with the machine, certifies the machine conformity with the law in force.

NOTE

Two copies of the original declaration of conformity are provided together with the machine documentation.

IDENTIFICATION DATA

The machine model and serial number are marked on the plate (41).

The machine model year is written in the declaration of conformity and it is also indicated by the first two figures of the machine serial number.

The petrol engine model and serial number are marked on the plates (42) and (43).

This information is useful when ordering machine and engine spare parts. Use the following table to write down the machine and engine identification data for any further reference.

MACHINE model ...............................................................................

MACHINE serial number ...................................................................

ENGINE model ..................................................................................

ENGINE serial number ......................................................................

OTHER REFERENCE MANUALS

Other manuals supplied with the machine:

Petrol Engine Manual, to be considered an integral part of this Manual.

Sweeper Spare Parts List

Other available manuals:

Service Manual (that can be consulted at Nilfisk-Advance Service Centers)

2

146 0676 000(5)2007-06 A

SW 700S P

Image 44
Contents Sweeper SW 700S P 146 0676 00052007-06 aSweeper SW 700S PInhaltsverzeichnis EinleitungEinleitung AUSPACKEN/AUSLIEFERUNG SicherheitAllgemeine Hinweise Betriebsanleitung Deutsch Maschinenbeschreibung MaschinenaufbauMaschinenaufbau fortgesetzt Schalttafel ZUBEHÖRE/OPTIONENFarbencodes Technische DatenSchaltplan Betrieb VOR DEM AnlassenMaschinenanlassen UND -ABSTELLEN MaschinenanlassenMaschine in Betrieb MaschinenabstellenWartung Stunden Übersichtstabelle DER Planmässigen WartungBei Einlaufzeit Alle Vorgang Prüfung UND Einstellung DER Hauptkehrwalzenhöhe Ersetzen DER Hauptkehrwalze Prüfung UND Einstellung DER Seitenbesenhöhe Ersetzen DES SeitenbesensReinigung UND Vollständigkeitsprüfung DES Staubfilters Prüfung UND Einstellung DER Flapshöhe Prüfung der SeitenflapsPrüfung der Vorder- und Hinterflaps Flap linksFlap rechts Fehler Mögliche Ursache Lösung FehlersucheVerschrottung Table DES Matieres IntroductionIntroduction Deballage / Livraison SecuriteInstructions Generales Manuel Dutilisation Français Description DE LA Machine Structure DE LA MachineStructure DE LA Machine suite Accessoires / Options Tableau DE BordLégende Codes des couleurs Schema ElectriqueCaracteristiques Techniques Utilisation Avant LA Mise EN MarcheMise EN Marche ET Arret DE LA Machine Mise en marche de la machineMachine AU Travail Arrêt de la machineEntretien Plan Dentretien Programme Toutes ProcédureLes HeuresControle ET Reglage DE LA Hauteur DU Balai Central Remplacement DU Balai Central Remplacement DU Balai Lateral Controle ET Reglage DE LA Hauteur DU Balai LateralNettoyage ET Controle DE Lintegrite DU Filtre a Poussiere Controle ET Reglage DE LA Hauteur DES Volets Contrôle des volets latérauxContrôle des volets avant et arrière Volet gaucheVolet droit Problème Cause probable Remède Depistage DES PannesMise EN Decharge Table of Contents Manual Purpose and Contents HOW to Keep this Manual Declaration of ConformityTarget Identification DataSafety UNPACKING/DELIVERYGeneral Instructions English Machine Description Machine StructureMachine Structure Continues ACCESSORIES/OPTIONS Control PanelKey Colour code Technical DataWiring Diagram USE Before Starting the MachineStarting and Stopping the Machine Starting the machineMachine Operation Stopping the machineMaintenance Scheduled Maintenance Table Upon deli Running-in Every Procedure 100300 HoursMain Broom Height Check and Adjustment Main Broom Replacement Side Broom Height Check Adjustment Side Broom ReplacementDust Filter Cleaning and Integrity Check Skirt Height Check and Adjustment Side skirt checkHood Safety Switch Operation Check Left skirtRight skirt Front and rear skirt checkTrouble Possible cause Remedy TroubleshootingScrapping Inhoudsopgave InleidingInleiding Verpakking VERWIJDEREN/AFLEVERING VeiligheidAlgemene Instructies Gebruiksaanwijzing Nederlands Beschrijving VAN DE Machine Bouw VAN DE MachineOpbouw VAN DE Machine vervolg Accessoires / Opties BedieningspaneelKleurcodering Elektrisch SchemaTechnische Eigenschappen Gebruik Voor HET StartenDE Machine Starten EN Stoppen Starten van de machineMachine in Bedrijf De machine stoppenOnderhoud Onderhoudsschema Inloopperi ElkeDE Hoogte VAN DE Hoofdborstel Controleren EN Afstellen DE Hoofdborstelvervangen DE Hoogte VAN DE Zijborstel Controleren EN Afstellen DE Zijborstel VervangenReiniging EN Contole OP Integriteit VAN HET Stoffilter DE Hoogte VAN DE Flaps Controleren EN Afstellen Controle van de zijflapsControle van de voor- en achterflap LinkerflapRechterflap Probleem Waarschijnlijke oorzaak Oplossing Storingen LokaliserenVerwijdering

SW 700S P specifications

The Nilfisk-Advance America SW 700S P is an innovative and efficient machine that stands out in the realm of commercial cleaning equipment. Designed for optimal performance and user convenience, the SW 700S P combines state-of-the-art technology with robust features aimed at streamlining the cleaning process in a variety of industrial and commercial settings.

One of the standout features of the SW 700S P is its compact design, which allows for excellent maneuverability in tight spaces. This is particularly beneficial in environments such as retail stores, schools, and warehouses where space can often be limited. The machine’s low profile ensures that it can easily navigate around obstacles, providing thorough cleaning without disrupting daily operations.

Equipped with a powerful yet efficient motor, the SW 700S P delivers impressive cleaning capabilities. It utilizes a dual-suction system that maximizes dirt and debris pickup, ensuring a consistently clean surface. This technology not only enhances cleaning efficiency but also minimizes the need for frequent emptying of the waste container, allowing operators to focus on their tasks without interruption.

The machine incorporates user-friendly controls, making it accessible for operators of all experience levels. The ergonomic design features an adjustable handle that ensures comfort during prolonged use. Additionally, operators can easily switch between cleaning modes, optimizing the machine for various floor types and levels of dirt accumulation.

Another noteworthy technology is the integrated battery system that provides a sustainable power source, reducing the environmental footprint of the cleaning process. The SW 700S P features rapid charging capabilities, ensuring that it can be fully recharged and ready for use in minimal time, thus maximizing productivity throughout the day.

Maintenance is simplified with the SW 700S P, as daily upkeep can be performed quickly and efficiently. The machine features easily accessible components, allowing users to conduct routine inspections and cleaning with minimal effort. This not only extends the life of the equipment but also ensures consistent performance.

In summary, the Nilfisk-Advance America SW 700S P is a pioneering cleaning solution that combines versatility, efficiency, and ease of use. Its advanced features and technologies make it an invaluable asset for businesses looking to maintain cleanliness and hygiene standards while promoting operational efficiency.