English / A-23, POST-OPERATION Checklist

ENGLISH / A-23

POST-OPERATION & CLEAN-UP INSTRUCTIONS

TO STOP THE CLEANING OPERATION

Discontinue the cleaning operation whenever a solution or recovery warning or stop light is illuminated.

The solution light will illuminate when the solution tank is empty. At this time, discontinue the scrubbing cycle, put all controls in position for transport and drive to the drain area. See instructions on how to drain and clean the recovery and solution tanks, and empty the debris hopper.

The recovery warning light will illuminate approximately 5 minutes before loss of vacuum to the recovery tank. This warning period should give ample time to complete the scrubbing cycle and transport or scrub to the drain area.

NOTE

After stopping the engine, perform this post-operation checklist.

POST-OPERATION CHECKLIST

1.Clean debris hopper.

2.Check sweeping broom for wear or damage.

3.Check all ﬂaps for wear, damage and adjustment.

4.Drain and clean solution tank (ESP system)

5.Clean solution ﬁlter screen (ESP system)

6.Drain and clean recovery tank.

7.Clean recovery tank screens and ﬂoats.

8.Check manifold and vacuum hoses for debris or obstructions, backﬂush if necessary.

9.Check scrub brushes for wear or damage.

10.Check rear and side squeegees for wear, damage and adjustment.

11.Fill fuel tank.

12.Check all systems for leaks.

TO DRAIN SOLUTION TANK (RECYCLING OPERATION) (ESP SYSTEM)

Draining the solution tank is accomplished by a 4-foot (92 cm.) long drain hose located under the frame channel. To drain the tank, lower the hose, remove the plug and drain. When the draining operation is completed, clean the solution tank as outlined below.

FIGURE 19

TO CLEAN SOLUTION TANK (RECYCLING OPERATION) (ESP SYSTEM)

Cleaning the solution tank is simpliﬁed by the large access cover. Flush all deposits from the tank, also ﬂush all probes and the solution line strainer to remove any deposits - remove strainer if necessary. When the cleaning operation is completed, plug and replace the hose. Close and secure covers.

TO DRAIN RECOVERY TANK

A 4-foot long drain hose for the recovery tank is located under the frame channel. To drain the tank, lower the hose, remove the plug and drain. Open the recovery tank and remove the drain plug. When the draining operation is completed, ﬂush and clean the recovery tank as outlined on the next page.

FORM NO. - 56041719 - CR 1500 - A-23

CR 1500 specifications

The Nilfisk-ALTO CR 1500 is a state-of-the-art cleaning machine that epitomizes efficiency and innovation, making it an ideal solution for both industrial and commercial cleaning applications. Designed to meet the rigorous demands of various environments, this model stands out with its powerful performance and user-friendly features.

One of the key features of the CR 1500 is its robust design, which allows it to handle heavy-duty tasks with ease. The machine is equipped with a reliable motor that ensures consistent power output, enabling it to tackle even the toughest cleaning jobs. With a high pressure and a flow rate that can be adjusted according to specific cleaning requirements, the CR 1500 guarantees optimal results every time.

The CR 1500 also integrates advanced technology, which enhances its operational efficiency. Its innovative EcoMode function significantly reduces both energy consumption and water usage without compromising cleaning performance. This environmentally friendly feature not only lowers operational costs but also supports sustainability initiatives, making it a smart choice for businesses aiming to reduce their ecological footprint.

Another noteworthy characteristic of the Nilfisk-ALTO CR 1500 is its user-centric design. The machine is equipped with ergonomic handles and intuitive controls, allowing for effortless maneuverability. The compact size of the unit ensures that it can easily navigate tight spaces while providing users with maximum comfort during extended cleaning sessions.

In addition to its main cleaning capabilities, the CR 1500 is versatile, equipped with various accessories and attachments that enable it to perform multiple tasks. This adaptability makes it suitable for a wide range of applications, including car washes, outdoor cleaning, and industrial facilities. The ease of changing accessories further enhances its usability, ensuring that it can quickly be tailored to the task at hand.

Durability is also a hallmark of the Nilfisk-ALTO CR 1500. Constructed with high-quality materials, this cleaning machine is built to last, even under harsh conditions. Regular maintenance is simplified through accessible components, ensuring that downtime is minimized and productivity is maximized.

In summary, the Nilfisk-ALTO CR 1500 combines powerful performance with innovative technology and a user-friendly design. Its eco-friendly features, versatility, and durability make it an exceptional choice for anyone in need of a reliable cleaning solution. Whether used in a commercial or industrial setting, the CR 1500 delivers results that not only meet but often exceed expectations.