20 / English, Recycling or ESP System

A-20 / ENGLISH

OPERATING INSTRUCTIONS

FILLING THE SOLUTION TANK

NON-RECYCLING OR STANDARD SCRUBBING SYSTEM

1.Make sure the solution control lever is in the “Off” (rear) position.

2.Open the solution tank cover (right hand side).

3.Fill the tank with 100 gallons (378 L) of water and the correct mixture of American-Lincoln #100 Industrial Cleaner for the job.

4.Close the solution tank cover.

RECYCLING OR ESP SYSTEM

1.Make sure the solution control lever is in the “Off” (rear) position.

2.Open the solution tank cover (right hand side).

3.Fill the solution tank as outlined above with 100 gallons (378 L) of pure water.

4.Fill the detergent tank with 5 gallons (19 L) of American-Lincoln #100 Industrial Cleaner.

5.Close the solution tank cover.

NOTE

Fill recovery tank halfway with water for the ESP system

WARNING

To prevent over-sudsing and machine damage,

use only AMERICAN-LINCOLN Industrial Cleaning Solution #100.

WARNING

DO NOT put gasoline, combustible or other ﬂammable material

in the solution, recovery or detergent tanks.

NOTE

Before starting the engine, perform the pre-start checklist.

PRE-START CHECKLIST

1.Clean engine air ﬁlter element if needed

2.Check engine oil level

3.Check radiator coolant level

4.Check hydraulic ﬂuid level

5.Check fuel level

6.Check all systems for leaks

7.Check brakes and controls for proper operation

BEFORE STARTING ENGINE

1.Set parking brake

2.Make sure all controls are in the “Off” position

TO START ENGINE

1.Be sure accelerator and directional control pedal is in neutral.

2.Turn key to “On” position and hold it until the engine starts.

3.If engine fails to start after following the above procedures, refer to Engine Manual.

WARNING

The manufacturer does not advise storing the machine in below-freezing temperatures unless all ﬂuids have been drained from the detergent, solution and recovery tanks and associated systems. When machine has been stored in below-freezing temperatures, run engine at lowest possible settings and let machine sit 5-10 minutes to warm engine and hydraulic oil.

A-20- FORM NO. - 56041719 - CR 1500

CR 1500 specifications

The Nilfisk-ALTO CR 1500 is a state-of-the-art cleaning machine that epitomizes efficiency and innovation, making it an ideal solution for both industrial and commercial cleaning applications. Designed to meet the rigorous demands of various environments, this model stands out with its powerful performance and user-friendly features.

One of the key features of the CR 1500 is its robust design, which allows it to handle heavy-duty tasks with ease. The machine is equipped with a reliable motor that ensures consistent power output, enabling it to tackle even the toughest cleaning jobs. With a high pressure and a flow rate that can be adjusted according to specific cleaning requirements, the CR 1500 guarantees optimal results every time.

The CR 1500 also integrates advanced technology, which enhances its operational efficiency. Its innovative EcoMode function significantly reduces both energy consumption and water usage without compromising cleaning performance. This environmentally friendly feature not only lowers operational costs but also supports sustainability initiatives, making it a smart choice for businesses aiming to reduce their ecological footprint.

Another noteworthy characteristic of the Nilfisk-ALTO CR 1500 is its user-centric design. The machine is equipped with ergonomic handles and intuitive controls, allowing for effortless maneuverability. The compact size of the unit ensures that it can easily navigate tight spaces while providing users with maximum comfort during extended cleaning sessions.

In addition to its main cleaning capabilities, the CR 1500 is versatile, equipped with various accessories and attachments that enable it to perform multiple tasks. This adaptability makes it suitable for a wide range of applications, including car washes, outdoor cleaning, and industrial facilities. The ease of changing accessories further enhances its usability, ensuring that it can quickly be tailored to the task at hand.

Durability is also a hallmark of the Nilfisk-ALTO CR 1500. Constructed with high-quality materials, this cleaning machine is built to last, even under harsh conditions. Regular maintenance is simplified through accessible components, ensuring that downtime is minimized and productivity is maximized.

In summary, the Nilfisk-ALTO CR 1500 combines powerful performance with innovative technology and a user-friendly design. Its eco-friendly features, versatility, and durability make it an exceptional choice for anyone in need of a reliable cleaning solution. Whether used in a commercial or industrial setting, the CR 1500 delivers results that not only meet but often exceed expectations.