Motorola i860 manual Basic-Level Test Checklist, Preventive Maintenance, Done Test Pass Fail

BASIC LEVEL CHECKS AND SELF TESTS: Basic-Level Test Checklist

5.3Basic-Level Test Checklist

Use the following checklist to ensure that all the necessary tests are performed and to provide a tracking mechanism in case the unit is sent to the next level of service. Check the appropriate box for each test performed and indicate whether or not the test was completed successfully.

Table 5-1. Basic-Level Test Checklist

Done Test Pass Fail

Shock and Pressure

SIM Card Swap

Accessory Swap

Lockup

Battery Connections

Voltage Recognition

GPS Receiver

Passcode

Programming Menu Settings

Call Performance

Audio Loopback

ESN and IMEI Matching

Level Set

Engineering Debug Check

Codeplug Repair Procedure

Codeplug Troubleshooting

Corrupted Software Repair Procedure

Camera Test

5.4Preventive Maintenance

Although the unit does not require a scheduled preventive maintenance program, a visual inspection and cleaning is recommended before testing begins.

NOTE: Do not use aerosol sprays, tuner cleaners, or other chemicals to clean the unit. Damage to the plastic surfaces might occur.

To clean the unit (approximately 3 minutes):

1.Prepare a 0.5% solution of a mild dishwashing detergent and water.

2.Apply the solution sparingly to the external surfaces of the unit with a soft, absorbent cloth. Prevent moisture from getting inside the unit.

3.Remove any dirt from the unit using a stiff, non-metallic, short-bristled brush.

4.Wipe and dry the unit with a soft, absorbent, lint-free cloth. Make sure that there are no damp spots on the connectors or in cracks and crevices.

5-2 68P80400P73-A