BASIC LEVEL TEST MODES AND PROCEDURES: Test Modes

 

 

 

 

Table 6-1. Display Screens (Continued)

 

 

 

 

Name

Description

 

 

 

 

IMEI/SIM ID

Displays the electronic serial number and SIM ID serial number.

 

 

The IMEI is the global name assigned to the mobile station at manufacturing time and should

 

 

correspond to the serial-number tag of the unit.

 

 

The SIM ID is the SIM electronic serial number and should correspond with the number

 

 

stamped on the SIM card.

 

 

Pressing OK allows the IMEI/SIM ID to be traced.

 

 

 

 

Registr Log

Displays the Dispatch Log, Interconnect Log, Packet Data Log, Mobile IP Log, and Phone

 

 

Rst Log. Registration Log information is updated when the user deselects and selects the

 

 

Registr Log choice.

 

 

 

 

Err/Chan Codes

Displays the physical channel that the unit is connected to or the radio link procedure that is

 

 

currently active. Also, displays error codes of errors encountered during normal operation if

 

 

Err/Chan codes is On. At power up, the Err/Chan Codes is Off.

 

 

 

 

Current Freq

Displays current frequency and band. Pressing OK allows the current frequency and band to

 

 

be traced.

 

 

 

 

Dispatch IDs

Displays the Dispatch Group ID affiliated with the unit in the current dispatch-location area.

 

 

Also, displays the Dispatch Individual ID affiliated with the unit in the current dispatch

 

 

location. Pressing OK allows the dispatch IDs to be displayed periodically.

 

 

 

 

Band Info

Displays primary and secondary bands.

 

 

 

 

Bandmap

Displays the currently selected regional bandmap. Pressing OK allows the bandmap to be

 

 

displayed periodically.

 

 

 

 

Hardware

Displays the AFC Offset and Channel Number.

 

 

Pressing OK allows the hardware parameters to be traced.

 

 

 

 

Fatal Err/#

Displays the Fatal Error log. This log contains a count of any fatal errors logged during the

 

 

unit's automatic self test. Optioning clear empties the log.

 

 

 

 

Flags

Displays the error log. This log contains any errors logged by the unit software. Pressing

 

 

Menu when it appears displays the Clearall screen in which the user can clear all the logged

 

 

errors.

 

 

 

 

Resets

Displays the Reset Error log. This log contains any errors logged when the user resets the

 

 

unit during operation. The most recent reset appears at the top of the list. Pressing Menu

 

 

when it appears displays the Clearall screen in which the user can clear all the logged errors.

 

 

 

 

Coin Cell

Displays the Charger and Battery Voltage.

 

 

 

 

CE Status

Indicates accessory type connected to unit.

 

 

 

6.1.3Entering Test Mode

Use this procedure to access test mode.

To enter test mode:

1. Power up the unit. Wait until the power-up sequence is complete before continuing.

NOTE: Steps 2 through 7 must be performed quickly (no more than one second between each key press).

2. Press #.

68P80400P73-A

6-3

Page 54
Image 54
Motorola i860 manual Entering Test Mode, To enter test mode