Motorola i860 manual Antenna, Required Tools T-4 Torx bit

PREPARING FOR FIELD LEVEL TESTING: Antenna

7.9Antenna

Required Tools: T-4 Torx bit,

sharp scribe.

7.9.1Remove:

1.Extend antenna whip fully.

2.Remove valence plug at base of antenna to expose T4 screw head (see Figure 7-3).

3.Loosen T-4 counterclockwise. Remove completely.

4.Hold unit stationary while pulling at antenna collar until antenna assembly releases.

7.9.2Install:

1.Carefully push antenna collar into position.

2.Insert antenna assembly with whip fully extended, contact toward interior of unit. Push firmly until fully seated.

3.Reinsert T-4 screw and tighten clockwise to 0.5 in/lb.

4.Reinsert valence plug.

2

Figure 7-3.

68P80400P73-A 7-7