MoistAir MA 0800 0 Location and Electrical Hook Up, Electrical Hook-Up, Selecting a Location

Page 5

SP6599-1 MoistAIR 3/29/06 1:13 PM Page 5

Step 2. Location and Electrical Hook Up

WARNING: For your own safety, do not use humidifier if any parts are damaged or missing.

Selecting A Location

Place humidifier on a flat level surface, take extra care in leveling when placing the unit on carpet. Position the humidifier where the most humidity is needed or where the most air will be circulated throughout the house such as near a cold air return.

Moist air (humidity) produced will disperse into the whole house, but the area closest to the unit will have the highest humidity. If the unit is positioned close to a window, condensation may form on the window pane. If this occurs the unit should be repositioned in another location.

NOTE: Due to release of cool, moist air from humidifier, it is best to direct air away from thermostat and hot air registers and to position humidifier next to an inside wall. Unit should not be placed where cold air from outside walls or warm air from a hot air register blows directly on it.

Positioning The Unit

The humidifier should be positioned with the back (cord exit side) and left side, at least 2 inches (5 centimetres) away from the wall. Air needs to enter through all of the louvers in the housing assembly in order for the humidifier to operate at peak efficiency.

At least 2 inches (5 cm) from wall

NOTE: Be sure that the humidistat, which is located on the power cord, is free from obstruction and away from any hot air source.

Electrical Hook-Up

Locate nearest 120V A.C. wall socket in the location desired, preferably on inside wall. With the humidifier in the desired location, route the electrical cord safely so no one will trip or upset the humidifier. Plug in the electrical cord.

WARNING: To reduce the risk of fire or shock hazard, humidifier should be plugged into a 120V A.C. outlet. Do not use extension cords.

To reduce the risk of electrical shock, this humidifier has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet, reverse plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

5

Image 5
Contents Evaporative Console General Safety Instructions Description Know Your HumidifierGettingYour Humidifier Up and Running How Your Humidifier WorksElectrical Hook-Up Location and Electrical Hook UpSelecting a Location Positioning The UnitBottle Base Spring Valve AssemblyWater Fill Function Buttons Digital Display Operating the ControlsDigital Display Operating the Controls cont’d Using Your HumidifierCheck Filter Display Humidistat Check Filter IndicatorFilter Replacement Replacement and Care of FiltersCleaning and Maintenance Trouble Probable Cause Remedy TroubleshootingTrouble Probable Cause Remedy Repair Parts Always order by part number Not by key number Description Murray Street Little Rock, AR U.S.A MA0800 Consignes DE Sécurité Générales Housing Bâti Fan AssemblyFamiliarisez-vous avec votre humidificateur d’air Humidistat BaseDry air De l’air enters Comment fonctionne votre humidificateur d’airPremière étape mise en état de marche Positionnement de l’appareil Choix d’un emplacement pour l’humidificateurEnsembleSpring Valvede Troisième étape remplissage d’eauFunction Quatrième étape fonctionnement des commandesAffichage numérique Utilisation de votre humidificateur d’air Fonctionnement des commandes suiteBouton de réglage de l’humidité Affichage du remplissage nécessaireHumidostat Indication du besoin de vérifier le filtreRemplacement du filtre Remplacement et entretien du filtrePremière étape Maintenance de fin de saisonDeuxième étape Retrait des éléments Désinfection de la baseDépannage Problème Cause probable SolutionLe réservoir est vide Remplissez le réservoir d’eau Pièces de rechange Pièce Murray Street Little Rock, AR U.S.A 2007