MoistAir MA 0800 0 owner manual Cleaning and Maintenance

Page 11

SP6599-1 MoistAIR 3/29/06 1:13 PM Page 11

Cleaning and Maintenance

WARNING: To reduce the risk of injury, fire or damage to humidifier, use only cleaners specifically recommended for humidifiers. Never use flammable, combustible or poisonous materials to clean your humidifier. To reduce the risk of scalds and damage to humidifier, never put hot water in humidifier.

CAUTION: Local water purity varies from area to area and under certain conditions water impurities and airborne bacteria may promote the growth of microorganisms in the reservoir of the humidifier.

To retard bacteria growth that may cause odors and be harmful to your health, use only MoistAIR replacement filters. We also recommend using EPA approved bacteriostat, and humidifier cleaner, available at your local store.

Step 1

To make cleaning easier, the humidifier base should be empty and completely dried out. To accomplish this, use the following method:

a.Allow the humidifier to run until the REFILL message “F” illuminates and the automatic shutoff has stopped the humidifier fan.

b.Unplug humidifier.

WARNING: To reduce the risk of shock, always unplug humidifier before cleaning or servicing. If humidifier is not un-plugged, fan could start after housing is removed.

Step 2

To Remove Parts

See “Replacement and Care of Filters” page 10.

NOTE: There may be a little water still in the base. Carefully dump the water out or remove with a sponge.

NOTE: Remove excess water before cleaning

Step 3

Bi-Weekly Maintenance

Removing Scale

1.Fill the humidifier base with one 8 oz. cup (236 milliliters) of undiluted white vinegar. Let solution stay 20 minutes.

2.Clean all interior surfaces with a soft brush. Dampen a soft cloth with undiluted white vinegar and wipe out the base to remove scale.

3.Rinse thoroughly with clean warm water to remove scale and cleaning solution.

Disinfecting Base

1.Pour 1/2 gallon (1.89 litres) of water and 1/2 teaspoon (2.5 millilitres) chlorine bleach into the base. Let solution stay for 20 minutes, carefully swishing every few minutes. Wet all surfaces normally exposed to water.

2.Empty base after 20 minutes. Rinse with water until bleach smell is gone. Allow unit to dry out

completely.

NOTE: The water bottle should be cleaned in the same manner as the base. Rinse thoroughly with clean water after all steps are complete.

End of Season Maintenance

1.Follow “Bi-Weekly Maintenance” instructions at end of humidification season.

2.Remove filter.

3.Let humidifier dry completely before storing.

4.Store in cool, dry location.

5.Install a new filter in clean humidifier before next season begins.

NOTE: “Bi-Weekly Maintenance”

procedure is also recommended if you do not plan to run the humidifier for

11one week or more.

Image 11
Contents Evaporative Console General Safety Instructions Description Know Your HumidifierGettingYour Humidifier Up and Running How Your Humidifier WorksPositioning The Unit Location and Electrical Hook UpElectrical Hook-Up Selecting a LocationBottle Base Spring Valve AssemblyWater Fill Function Buttons Digital Display Operating the ControlsDigital Display Operating the Controls cont’d Using Your HumidifierCheck Filter Display Humidistat Check Filter IndicatorFilter Replacement Replacement and Care of FiltersCleaning and Maintenance Trouble Probable Cause Remedy TroubleshootingTrouble Probable Cause Remedy Repair Parts Always order by part number Not by key number Description Murray Street Little Rock, AR U.S.A MA0800 Consignes DE Sécurité Générales Humidistat Base Fan AssemblyHousing Bâti Familiarisez-vous avec votre humidificateur d’airDry air De l’air enters Comment fonctionne votre humidificateur d’airPremière étape mise en état de marche Positionnement de l’appareil Choix d’un emplacement pour l’humidificateurEnsembleSpring Valvede Troisième étape remplissage d’eauFunction Quatrième étape fonctionnement des commandesAffichage numérique Affichage du remplissage nécessaire Fonctionnement des commandes suiteUtilisation de votre humidificateur d’air Bouton de réglage de l’humiditéHumidostat Indication du besoin de vérifier le filtreRemplacement du filtre Remplacement et entretien du filtreDésinfection de la base Maintenance de fin de saisonPremière étape Deuxième étape Retrait des élémentsDépannage Problème Cause probable SolutionLe réservoir est vide Remplissez le réservoir d’eau Pièces de rechange Pièce Murray Street Little Rock, AR U.S.A 2007