To add a page to the display | Lowrance electronic EP-80R TH

To add a page to the display:

1.Press MENU, use the UP and DOWN keys to select PAGES and press EN- TER. A menu will pop up with four options: Add Page, Remove Page, Page Scrolling and Pop-Ups Setup.

2.Select ADD PAGE and press ENTER.

3.Highlight (Single Analog, Dual Analog, Quad Analog, Single Digital, Dual Digital or Quad Digital) and press ENTER. The following message will appear: Press Enter to add the selected page.

4.Press ENTER, which will take you back to the main display, where the page you selected will be shown on the screen.

Customizing Pages

The customizing pages feature allows you to choose what data will be displayed on selected pages. You can use the Single Analog, Dual Ana- log, Quad Analog, Single Digital, Dual Digital or Quad Digital pages to display temp sensor data.

To customize Single Analog page:

1.Make sure the Single Analog page has been added to the page screen rotation.

2.Use the ENTER and EXIT keys to scroll the Single Analog page onto the main display.

3.Press MENU, use the UP and DOWN keys to select CUSTOMIZE and press ENTER. The data menu will appear.

4.Select TEMPERATURE and press ENTER. The Select Temp menu will ap- pear with three temp types: Water Temp, Outside Temp and Inside Temp.

5.Highlight desired temp type and press ENTER. You will be taken back to the main display.

To customize Dual Analog page:

1.Make sure the Dual Analog page has been added to the page screen rotation.

2.Use the ENTER and EXIT keys to scroll the Dual Analog page onto the main display.

3.Press MENU, use the UP and DOWN keys to select CUSTOMIZE and press ENTER. The Position menu will appear with two options: Top Gauge and Bottom Gauge.

4.Select the desired position and press ENTER. The data menu will ap- pear.