To unconfigure a temp sensor:
1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU.
2.Highlight B. DEVICES and press MENU, which will open the Bus Devices list.
3.Select a temp sensor from the Bus Devices list and press MENU. The Configuration Options menu will appear with two choices: Unconfig (Unconfigure) and Reconfig (Reconfigure).
4.Select UNCONFIG and press MENU. The following message will appear: Hit Menu to Unset Device Name.
5.Press MENU to unconfigure the sensor. You will be directed to the Bus Devices list, where the temp you unconfigured will be listed as Uncfg Temp.
To reconfigure a temp sensor:
To reconfigure a sensor, there must be a configuration name available (Water, Outside or Inside). If you try to reconfigure a sensor when the desired configuration name (Water, Outside and Inside) is in use, a Name Already Selected message will appear.
If all three temps are configured — meaning there is no name configura- tion available — follow the first set of instructions. If the desired con- figuration name is available, follow the second set of instructions.
The first set of instructions below will show you how to switch the con- figuration of a water temp to an outside temp.
If all temps configured (Configuration name unavailable):
1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU.
2.Highlight B. DEVICES and press MENU, which will open the Bus Devices list.
3.Highlight WTR TEMP and press MENU. The Configuration Options menu will appear.
4.Select UNCONFIG and press MENU. The following message will appear: Hit Menu to Unset Device Name.
5.Press MENU to unconfigure the sensor and return to the Bus Devices list, where the temp you unconfigured (Water Temp) will be listed as Uncfg Temp.
6.Highlight OUT T (Outside Temp) and press MENU. The configuration options menu will appear.
11