Intelligent Motion Systems Motion Detector operating instructions Warranty

Page 73

WARRANTY

TWENTY-FOUR (24) MONTH LIMITED WARRANTY

Intelligent Motion Systems, Inc. (“IMS”), warrants only to the purchaser of the Product from IMS (the “Customer”) that the product purchased from IMS (the “Product”) will be free from defects in materials and workmanship under the normal use and service for which the Product was designed for a period of 24 months from the date of purchase of the Product by the Customer. Customer’s exclusive remedy under this Limited Warranty shall be the repair or replacement, at Company’s sole option, of the Product, or any part of the Product, determined by IMS to be defective. In order to exercise its warranty rights, Customer must notify Company in accordance with the instructions described under the heading “Obtaining Warranty Service.”

This Limited Warranty does not extend to any Product damaged by reason of alteration, accident, abuse, neglect or misuse or improper or inadequate handling; improper or inadequate wiring utilized or installed in connection with the Product; installation, operation or use of the Product not made in strict accordance with the specifications and written instructions provided by IMS; use of the Product for any purpose other than those for which it was designed; ordinary wear and tear; disasters or Acts of God; unauthorized attachments, alterations or modifications to the Product; the misuse or failure of any item or equipment connected to the Product not supplied by IMS; improper maintenance or repair of the Product; or any other reason or event not caused by IMS.

IMS HEREBY DISCLAIMS ALL OTHER WARRANTIES, WHETHER WRITTEN OR ORAL, EXPRESS OR IMPLIED BY LAW OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. CUSTOMER’S SOLE REMEDY FOR ANY DEFECTIVE PRODUCT WILL BE AS STATED ABOVE, AND IN NO EVENT WILL THE IMS BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, SPECIAL OR INDIRECT DAMAGES IN CONNECTION WITH THE PRODUCT.

This Limited Warranty shall be void if the Customer fails to comply with all of the terms set forth in this Limited Warranty. This Limited Warranty is the sole warranty offered by IMS with respect to the Product. IMS does not assume any other liability in connection with the sale of the Product. No representative of IMS is authorized to extend this Limited Warranty or to change it in any manner whatsoever. No warranty applies to any party other than the original Customer.

IMS and its directors, officers, employees, subsidiaries and affiliates shall not be liable for any damages arising from any loss of equipment, loss or distortion of data, loss of time, loss or destruction of software or other property, loss of production or profits, overhead costs, claims of third parties, labor or materials, penalties or liquidated damages or punitive damages, whatsoever, whether based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory, or other losses or expenses incurred by the Customer or any third party.

OBTAINING WARRANTY SERVICE

Warranty service may obtained by a distributor, if the Product was purchased from IMS by a distributor, or by the Customer directly from IMS, if the Product was purchased directly from IMS. Prior to returning the Product for service, a Returned Material Authorization (RMA) number must be obtained. Complete the form at http://www.imshome.com/rma.html after which an RMA Authorization Form with RMA number will then be faxed to you. Any questions, contact IMS Customer Service (860) 295-6102.

Include a copy of the RMA Authorization Form, contact name and address, and any additional notes regarding the Product failure with shipment. Return Product in its original packaging, or packaged so it is protected against electrostatic discharge or physical damage in transit. The RMA number MUST appear on the box or packing slip. Send Product to: Intelligent Motion Systems, Inc., 370 N. Main Street, Marlborough, CT 06447.

Customer shall prepay shipping changes for Products returned to IMS for warranty service and IMS shall pay for return of Products to Customer by ground transportation. However, Customer shall pay all shipping charges, duties and taxes for Products returned to IMS from outside the United States.

Page 72 Page 74
Image 73
Page 72 Page 74
Contents Forcetm Microstepping MForce PowerDrive Product Manual Important information This page intentionally left blank Table Of Contents Appendices List of Figures List of Tables MForce PowerDrive Front Microstepping MForce PowerDriveStepping Motor Connect Opto Reference and Logic Inputs Connecting the MotorForcetm Intentionally Left Blank Configuring Introduction to the Microstepping MForce PowerDriveFeatures and Benefits General Specifications Microstepping MForce PowerDrive Detailed SpecificationsMechanical Specifications Dimensions in Inches mm Setup ParametersPin # Function Description Pin Assignment and DescriptionP4 Connector Motor P3 Connector DC Power, 2-Pin Locking Wire CrimpParameter Setup Cable and Adapters Options and AccessoriesPrototype Development Cable Intentionally Left Blank Forcetm Microstepping MForce PowerDrive Manual Revision R032008 Mounting Recommendations Mounting and Connection GuidelinesMounting Hole Pattern Securing Power Leads and Logic LeadsLayout and Interface Guidelines Logic and SPI Communications P1 Power P3Motor P4 Intentionally Left Blank Choosing a Power Supply for Your MForce PowerDrive Interfacing DC PowerISP300-7 Unregulated Switching Supply DC Power Supply RecommendationsRecommended IMS Power Supplies IP804 Unregulated Linear SupplyRecommended Power and Cable Configurations Basic DC Power ConnectionExample a DC Power Cabling Under 50 Feet Transformer 10 to 28 VAC RMS for 48 VDC Systems Selecting a Motor Motor Selection and InterfaceWinding Inductance Types and Construction of Stepping MotorsRecommended IMS Motors Lead Stepping Motor Parallel ConfigurationFrame Enhanced 3.0A Frame Enhanced 2.4A Not Available with Double ShaftFrame Enhanced 6.0A Frame Enhanced 6.3ALead Motors Phase Connector PinPhase a Recommended Motor Cabling MForce PowerDrive Phase OutputsMotor Connections Example a Motor Cabling Less Than 50 FeetRecommended Motor Cable AWG Sizes Example B Motor Cabling Greater Than 50 FeetMicrostepping MForce PowerDrive Manual Revision R032008 Isolated Logic Input Characteristics Isolated Logic Input Pins and ConnectionsEnable Input Logic Interface and ConnectionDirection Step ClockQuadrature Up/DownSTEP/DIRECTION Timing Optocoupler Reference Optocoupler ReferenceInput Connection Examples NPN Open Collector Interface SinkingSwitch Interface Example Switch Interface Sinking+V +12 to +48 Minimum Required ConnectionsConnecting SPI Communications Logic Level Shifting and Conditioning Circuit SPI Pins and Connections4 SPI Master with a Single Microstepping MForce PowerDrive SPI Master with Multiple Microstepping MForce PowerDriveConfiguration Parameters and Ranges Using the IMS SPI Motor Interface InstallationColor Coded Parameter Values File IMS SPI Motor Interface Menu OptionsView Recall UpgradeHelp Msel Microstep Resolution Selection Msel Microstep Resolution SelectFactory Connected/Disconnected IndicatorSet ExitEnable Active High/Low Screen 2 I/O Settings Configuration ScreenInput Clock Type Input Clock FilterIMS Part Number/Serial Number Screen Fault IndicationUpgrade Instructions IMS SPI Upgrader ScreenPort Menu Initialization ScreenPWM Mask Motor Settings Screen PWM Current ControlPWM Frequency Range Parameter Maximum PWM Duty Cycle % ParameterPWM Control Bits Example PWM Settings By Motor SpecificationsSPI Timing Notes Using User-Defined SPICheck Sum Calculation for SPI MSB SPI Commands and ParametersSPI Communications Sequence WriteIntentionally Left Blank Appendices Intentionally Left Blank Optional Prototype Development Cables MD-CC300-000 USB to SPI Parameter Setup CableAdapter Cables Installing the Cable/VCP Drivers Installation Procedure for the MD-CC300-000Figure A.5 Hardware Update Wizard Screen Determining the Virtual COM Port VCP Wire Color Code PD12-1434-FL3 Power, I/O and SPIPrototype Development Cable PD04-MF34-FL3 Prototype Development Cable PD02-2300-FL3Warranty Excellence in Motion

Motion Detector specifications

Intelligent Motion Systems (IMS) Motion Detector is a cutting-edge device designed for advanced motion detection and automation applications. This state-of-the-art technology plays a crucial role in enhancing security systems, managing smart homes, and facilitating industrial automation. With a focus on reliability, efficiency, and real-time responsiveness, the IMS Motion Detector brings numerous advantages to users.

One of the main features of the IMS Motion Detector is its high sensitivity and precision in capturing motion. Utilizing advanced infrared (IR) and microwave sensing technologies, the device can detect movement with remarkable accuracy, even in challenging environmental conditions. This dual-sensing approach allows for greater versatility, minimizing false alarms while ensuring reliable detection of genuine movement.

The IMS Motion Detector is designed with energy efficiency in mind. Employing low-power consumption technologies, it is ideal for long-term installations, reducing the need for frequent battery replacements or energy costs. Furthermore, the device offers customizable settings, enabling users to adjust sensitivity levels, detection range, and operational modes according to specific needs. This adaptability makes the IMS Motion Detector suitable for a variety of applications, from residential to commercial settings.

Another notable characteristic of the IMS Motion Detector is its seamless integration capabilities. It can be easily incorporated into existing security systems or smart home networks, allowing users to monitor and control their environments through user-friendly applications. Compatibility with popular home automation platforms further enhances its utility, enabling users to create automated scenarios, such as turning on lights or sending alerts to mobile devices upon detecting motion.

The device is built to withstand various environmental factors, featuring weather-resistant housing for outdoor use. Its robust construction ensures durability while maintaining optimal performance over an extended period.

In summary, the Intelligent Motion Systems Motion Detector is a sophisticated device that stands out for its advanced detection technologies, energy efficiency, customizable settings, and seamless integration capabilities. Whether used for enhancing security or automating daily routines, the IMS Motion Detector represents a significant innovation in the realm of motion detection and management. Perfect for both residential and commercial applications, it ensures users can monitor their environments with confidence and ease.
Top Page Image Contents