Emptying the Dust Cup Assembly
For best results empty the Dust Cup Assembly after each use; empty several times during prolonged usage.
Or empty the Dust Cup Assembly when it reaches the MAX fill line; NEVER
OVER-FILL THE DUST CUP.
Stand vacuum into upright position.
Turn vacuum off.
CAUTION: Unplug the vacuum; failure to do so might result in electric shock.
1
Note: Some dust and debris may remain in the top of your dust cup assembly on or near the metal screen. It is not necessary to completely remove this material before continuing to vacuum; Infinity’s advanced cyclonic action will sweep the metal screen clean once you begin to refill your dust cup.
2
3
To empty the Dust Cup Assembly:
1Grip carry handle and press the Dust Cup release button to remove Dust Cup Assembly
2Option A: for Quick Empty: Insert Dust Cup Assembly deep inside trash receptacle to contain dust and debris.
Press the Dust Cup Door release button; tap container gently to dislodge and release dust
and debris.
Snap door in place.
Important: if the Dust Cup Door does not swing open after pressing the release button, push the door open using the bottom door tabs.
3Option B: for Allergy Sufferers: Wrap a trash bag around the Dust Cup Assembly leaving space at the bottom for the door to swing open.
Locate the Dust Cup Door release button within the trash bag and press to release as you shake the dust cup to empty dust and debris.
Snap the bottom door in place.
Note: Option B can also be performed outside of the home to further minimize releasing dust back into the air. Carry just the Dust Cup Assembly and trash bag outside.
10 | TOLL FREE: |