OPERATION (cont’d)
AIR CONDITIONER
Note: The exhaust hose must be properly vented (outdoors) during air conditioning mode.
1)Press the POWER SWITCH key (Fig. A) to switch on the unit, and the previous set temperature will be shown in the temperature display area of the control panel.
Fig. A
2)Press the MODE key (Fig. B) until the COOL indicator light illuminates on the control panel (Fig. C). Each depression of the MODE key will advance to a different mode setting (Cool - Dehumidifier - Fan)
3)Press the appropriate increase or decrease buttons (Fig. D) to select a suitable operating temperature setting. Temperature settings are adjustable between 16°C (61°F) to 32°C (89°F).
4)Press the FAN key (Fig. E) to select the desired fan speed setting (Auto High-
the fan key will advance to a different setting).
•Cooling stops automatically when the set temperature is achieved. Cooling resumes when the room temperature rises above the “set” temperature level.
FAN
Note: During Fan mode, the exhaust hose does not have to be vented outdoors.
1)Press the POWER SWITCH key pad to switch on the unit (Fig. A).
2)Press the MODE key (Fig. B) until the FAN indicator illuminates on the control panel (Fig. G). Each depression of the MODE key will advance to a different mode setting
3)Press the Fan key (Fig. E) to select the desired FAN SPEED setting. Your selection will appear on the control panel. Each depression of the fan key will advance to a different fan speed
DEHUMIDIFIER
Note: During dehumidifier mode, the exhaust hose does not have to be vented outdoors.
1)Press the POWER SWITCH key pad to switch on the unit (Fig. A)
2)Press the MODE key (Fig. B) until the DRY indicator illuminates on the control panel (Fig. H). Each depression of the MODE key will advance to a different mode setting
IMPORTANT: There is no temperature adjustment during dehumidifier mode. If the room temperature is greater than 25°C, the fan speed can be adjusted, otherwise the fan speed is fixed at LOW speed.
Fig. B
Fig. C
Fig. D
Fig. E
Fig. F
Fig. G
Fig. H
6