Integra DTR-8.3 instruction manual Front panel display

Page 12

Index parts and facilities

Tuning /, Preset / buttons [36, 37, 43]

To tune into a radio station, press the Tuning / buttons. The tuner frequency is displayed in the front display and it can be changed in 50- kHz increments for FM and 10-kHz (or 9-kHz) increments for AM.

When FM is selected as the input source, you can hold down either the Tuning or button and then release it to activate the auto- search feature. It will search for a station in the direction of the button you pressed and stop when it tunes into one. When navigating through the menu settings, these buttons move the cursor up or down (or change the highlighted item).

To select a radio station that was stored using the Memory button, press the Preset / buttons.

When navigating through the menu settings, these buttons select the value or item that you selected with the Tuning / buttons. When you press the Setup button, the Tuning and Preset buttons become cursor buttons to be used for Setup Menu operations.

Enter button [43]

Press to display the screen for the item that is selected in the Setup Menu.

Return button [43]

When in the Setup Menu, press to go back one level. If pressed while at the Main Menu, you will exit the Setup Menu.

Video 5 Input terminals [21]

For connecting a video camera or game device.

Front panel display

Input signal path indicators

Shows from which terminal the input signal is coming.

Listening mode or digital input format indicators

One of these indicators lights to show the format of the current input source. In addition, one of the listening mode indicators lights to indicate the current listening mode.

Tuning indicators

AUTO indicator

Lights when receiving FM broadcasts in the stereo mode. Turns off when placed into the monaural mode.

TUNED indicator

Lights when a radio station is received.

FM STEREO indicator

Lights when an FM broadcast station is received in stereo.

Multi function display

During normal operation, shows the current input source and volume. When the FM or AM input is selected, shows the frequency and preset number. When the DISPLAY button is pressed, shows the listening mode and input source format. However, does not show the source format when the FM or AM source is selected.

Volume display

Shows the volume level.

SLEEP indicator

Lights when the sleep timer is turned on.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DTR-8.3 Important Safeguards AvisPrecautions Contents Contents Features Amplifier FeaturesAudio/Video Features FM/AM Tuner FeaturesSupplied accessories Before using this unitConnecting the power cord Setting up the remote controller Characterizing the remote controllerDirect-access buttons Serial port Reset button Battery coverSetting up the remote controller Home menuComponent’s control panel Touch the screen to startIndex parts and facilities Front panelsFront door Index parts and facilities Front panel display Rear panels Remote controller Home menuAV Amp Select AV Amp on the Home menu page 1/4 2/4 3/4 4/4 Listening mode buttons +/- buttonsLight button AV amp buttonConnecting to Audio/Video equipment Improper connection Inserted completelyRear optical jack Coaxial cableConnecting to Audio/Video equipment Connecting your audio componentsConnecting a compact disc player CD Connecting a turntable PhonoConnecting your video components Connecting a DVD Player with 5.1-Channel OutputFlow of the video signals is as follows Connecting a DVD player DVDConnecting a television monitor or projector Monitor OUT Monitor OUTSignal flow Connecting video camera, etc. Video 5 Input Connecting speakers Ideal speaker configurationMinimum speaker configuration for surround sound playback Speaker placementConnecting speakers Connecting speakersUsing the speaker labels Connecting antennas Connecting the AM antenna cableConnecting the included antennas Assembling the AM loop antennaConnecting antennas Connecting an FM outdoor antennaConnecting an AM outdoor antenna Directional linkageConnecting the remote zone Zone 2 speakers When using the Surr BACK/ZONE 2 Speakers terminalsWhen using the Zone 2 OUT terminals When using the Surr BACK/ZONE 2 PRE OUT terminalsConnecting From connecting block Mini plug cableRemote controller Cabinet Signal flow Block DTR-8.3 IR Emitter Remote controllerConnections for remote control Connecting the power cords from other devicesMiscellaneous Connections RS 232 portConnecting to devices with analog multi channel output Connecting auxiliary power amplifierConnecting to an external device with 12V Trigger terminal Miscellaneous ConnectionsConnecting the power Turning on the powerTurning on the power from the remote controller To change the display of the input source from Tape to MDInput source buttons Master Volume DTR-8.3 Remote controllerEnjoying music or videos with the DTR-8.3 Basic operationChanging the listening mode Remote controller onlyEnjoying music or videos with the DTR-8.3 Switching the display Adjusting the bass and trebleListening with headphones Temporarily turning off the soundAdjusting the brightness of the front display Using the sleep time remote controller onlyTemporarily changing the speaker output levels DimChanging the audio mode Enjoying the multichannel outputTuning into a radio station Listening to a stereo radio station FM modeListening to Radio Broadcasts Presetting a radio station Selecting a preset radio stationErasing a preset radio station Listening to Radio BroadcastsRecording a source Rec OutStart recording at the recording component as desired Press the Rec Out buttonRecording a source Using the buttons on the DTR-8.3 Ex. When the CD button is pressedZone 2 indicator Off Input source buttons Enjoying music or videos in the remote zoneSelecting an input source using the remote controller Adjusting the volume for the remote zoneEnjoying music or videos in the remote zone Setup Menu Basic MenuAdvanced Menu Setup Menu Navigating through the Setup MenuWhen using the buttons on the front panel Button on remote controllerHardware Setup Hardware Setup MenuSpeaker Impedance Sub-menu Hardware Setup IR in Setup Sub-menuSurr Back/Zone 2 Sub-menu Surr Back/ZoneSpeaker Setup Speaker Setup MenuSpeaker Config Sub-menu Speaker Setup Speaker Distance Sub-menuPress the Test button to complete the procedure CH Sel Level Calibration Sub-menuCalibrating the speaker levels Press the Test buttonInput Setup Input Setup MenuInitial settings for each input source When NET Audio is not selected as the input sourceInput Setup Digital FormatInput source selected Multichannel Video Setup Sub-menu Character Input Sub-menuIntelliVolume Sub-menu Listening Mode Preset Sub-menuTrigger Setup sub-menu Relationship between input source and listening mode Listening ModeType of software Input source signals Listening ModesDigital Signal Processing DSP modes Audio Adjust Audio Adjust MenuSetting Values Initial value Tone Control Sub-menuAudio Adjust Delay Sub-menuSound Effect Sub-menu Theater-Dimensional Sub-menu LFE Level Sub-menuMono Sub-menu Surround Sub-menu THX Sub-menu Setting Tone Control Listening mode TrebleBass Re-EQVolume Setup Sub-menu PreferencePreference Menu Headphones Level Sub-menu OSD Setup Sub-menuPreference OSD Position Sub-menuUsing the Remote Controller Adjust the SettingsUsing the Remote Controller Tap the mode you want to useTo hide the Mode menu Working with ModesSelecting a Device Define the Brand ofYour Device Select a device in the Home menuSelect Yes to define the brand of the device to operate Tap NextDefine the Brand of Your Device Select your brand from the listSelect a code set from the list Tap OK when the device reacts Defining brands by searchingTap Search Programming Buttons Programming control panel buttonsTo 8 inches 15 to 20 cm Programming direct-access and Left/Right Buttons Programming ButtonsProgramming device items Make sure the device tab is activeLabeling Buttons and Menu Items Labeling a buttonLabeling a menu item Edit the labelAdding and Moving Devices Adding devices Moving menu itemsAdding macros Delete and restore RestoreTap the item you want to restore DeleteRecording Macros and SettingTimers Recording macrosEditing macros Recording Macros and Setting Timers Setting timersOrganizing macros and timers into groups Changing the remote controller’s RF IR Settings Switch to RF IR mode by using the Mode buttonTap RF Choosing Another Channel Additional information ChadEditOptional recharging dock USA and Canadian models only With ChadEdit you canCan I program a button to execute more than one command? How do I program source switching?How do I reset the Remote controller? How do I revert to the original configuration?Overview of Symbols Troubleshooting guide Troubleshooting guide Video and AudioGeneral Problems Display is blank Remote controller shuts itself offRemote controller will not edit, label or delete commands Remote controller will not switch modesIf one of the messages shown below appears Specifications All channelsTotal harmonic distortion Than 0 % total harmonicSpecifications Onkyo U.S.A. Corporation Internet radio features Net-Tune FeaturesConnecting the DTR-8.3 to your Ethernet Network Enjoying Internet radio Playing a music file saved on the Audio Network Server Using the Alphanumeric keys To cancel the operationUse the / buttons to select one of the menu Net a Select NetA on the Home menu 1/3 2/3Configuring Various Settings Network Setup MenuConfiguring Various Settings Proxy Setup Sub-menuIP Address Sub-menu MAC Address Sub-menuTroubleshooting guide SpecificationsAppendix

DTR-8.3 specifications

The Integra DTR-8.3 is a sophisticated home theater receiver that exemplifies cutting-edge audio and video technologies, delivering an immersive experience for audiophiles and home cinema enthusiasts alike. As a flagship component in Integra's lineup, the DTR-8.3 combines high performance with versatile connectivity options, making it an ideal choice for modern entertainment systems.

One of the standout features of the DTR-8.3 is its robust power amplification, capable of delivering up to 100 watts per channel across nine channels. This level of power ensures dynamic sound reproduction across a wide range of audio formats, from the subtle nuances of a classical symphony to the thunderous effects of an action-packed movie. The receiver supports DTS:X and Dolby Atmos, providing object-based audio that envelops listeners in a three-dimensional soundstage. This technology enhances the overall cinematic experience, allowing sound to move freely around the listener, simulating a real-world environment.

In addition to its exemplary audio capabilities, the Integra DTR-8.3 is equipped with a full suite of video technologies. Supporting 4K Ultra HD resolution, HDR10, Dolby Vision, and BT.2020 color space, it is designed to handle the latest in high-definition video content. With full HDCP 2.2 support, users can connect their 4K Blu-ray players, gaming consoles, and streaming devices without worry. The receiver also features advanced video upscaling, transforming standard and high-definition video to near 4K quality for an enhanced viewing experience.

Connectivity is another area where the DTR-8.3 shines, with multiple HDMI inputs and outputs, including Zone 2 output for multi-room audio-video distribution. Users can easily integrate various sources, such as streaming devices, gaming consoles, and sound systems into their setup. Integrated Wi-Fi and Bluetooth capabilities enable seamless streaming of music from smartphones and tablets, while streaming services like Spotify, Pandora, and Amazon Music can be accessed directly.

The DTR-8.3 also embraces smart home integration, featuring compatibility with control systems such as Crestron, Control4, and others. This allows for easy automation and control of the receiver within a broader smart home ecosystem. For easy setup and configuration, the receiver comes with Audyssey MultEQ XT32 room correction technology. This feature analyzes the room acoustics and adjusts the sound output accordingly, ensuring optimal audio performance regardless of room conditions.

Overall, the Integra DTR-8.3 stands out as a premium home theater receiver, blending powerful audio performance, advanced video technologies, and intelligent connectivity options. It is designed for those who demand the best in their home entertainment experience, offering a truly immersive solution suitable for a wide range of applications. Whether you’re watching movies, listening to music, or gaming, the DTR-8.3 elevates sound and picture quality to new heights.
Top Page Image Contents