Integra DTR-8.3 Input Setup Menu, Initial settings for each input source, Digital Input

Page 49

Input Setup

2. Input Setup Menu

This menu allows you to make the various settings concerning the signals input from the various input sources that you use with the DTR-8.3. The settings made in this menu are valid for the input source that is currently selected with the input source buttons at the front panel and, therefore, these settings are made separately for each input source. Each input source may have a great number of settings that are difficult to keep track of, so we recommend making a chart to record what you have set and for which component to prevent confusion later.

When NET AUDIO is not selected as the input source

Advanced Menu

2.Input Setup Input:DVD

1.Digital Setup 2.Multichannel Setup 3.Video Setup 4.Character Input 5.IntelliVolume 6.Listening Mode Preset

ENTERQuit:SETUP

2-1. Digital Setup Sub-menu (When NET AUDIO is not selected as the input source)

This sub-menu concerns the input of digital signals from input sources and if these settings are incorrectly made, the digital audio signals may not be properly output, or not heard at all. This sub- menu will not appear if the selected input source button is AM or FM. It cannot be accessible if “Yes” is selected in 2-2. Multichannel Setup Sub-menu and “Multichannel” is selected in the AUDIO SELECTOR. Furthermore, since VIDEO 5 is fixed to the optical digital terminal on the front panel, this sub-menu will not appear if VIDEO 5 is selected.

Advanced Menu

2.Input Setup Input:DVD

2-1.Digital Setup

Input:DVD

a.Digital Input :COAX1

b.Digital Format :All

Quit:SETUP

Initial settings for each input source

Input source

Digital input

 

 

CD

OPT 1

 

 

PHONO

----

 

 

TUNER

 

 

 

TAPE

OPT 2

 

 

VIDEO 1

COAX 2

 

 

VIDEO 2

COAX 3

 

 

VIDEO 3

OPT 3

 

 

VIDEO 4

OPT 4

 

 

VIDEO 5

OPTICAL on front panel (fixed)

 

 

DVD

COAX 1

 

 

NET AUDIO

 

 

 

----: Available for digital input but not set in initial settings. : Not available for digital input.

a. Digital Input

This setting tells the DTR-8.3 which input source button on the front panel is connected with which digital input jack on the rear panel. To perform this setting, you must first select a digital input source at the front panel and then set the name of the digital input jack it is connected to with this setting.

For example, if the input source selected at the front panel is CD and the compact disc player is connected to DIGITAL INPUT OPT 1, then select “OPT1” here. If the input source selected is not connected to a digital input, then select “----.”

OPT1-4:Select if the input source is connected to any of the DIGITAL INPUT OPT jacks 1 through 4.

COAX1-3:Select if the input source is connected to any of the DIGITAL INPUT COAX jacks 1 through 3.

----:Select if the input source is not from a digital input jack.

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents DTR-8.3 Avis Important SafeguardsPrecautions Contents Contents Amplifier Features FeaturesAudio/Video Features FM/AM Tuner FeaturesBefore using this unit Supplied accessoriesConnecting the power cord Characterizing the remote controller Setting up the remote controllerDirect-access buttons Serial port Reset button Battery coverHome menu Setting up the remote controllerComponent’s control panel Touch the screen to startFront panels Index parts and facilitiesFront door Index parts and facilities Front panel display Rear panels Home menu Remote controllerAV Amp Select AV Amp on the Home menu page 1/4 2/4 3/4 4/4 +/- buttons Listening mode buttonsLight button AV amp buttonImproper connection Inserted completely Connecting to Audio/Video equipmentRear optical jack Coaxial cableConnecting your audio components Connecting to Audio/Video equipmentConnecting a compact disc player CD Connecting a turntable PhonoConnecting a DVD Player with 5.1-Channel Output Connecting your video componentsFlow of the video signals is as follows Connecting a DVD player DVDMonitor OUT Connecting a television monitor or projector Monitor OUTSignal flow Connecting video camera, etc. Video 5 Input Ideal speaker configuration Connecting speakersMinimum speaker configuration for surround sound playback Speaker placementConnecting speakers Connecting speakersUsing the speaker labels Connecting the AM antenna cable Connecting antennasConnecting the included antennas Assembling the AM loop antennaConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageWhen using the Surr BACK/ZONE 2 Speakers terminals Connecting the remote zone Zone 2 speakersWhen using the Zone 2 OUT terminals When using the Surr BACK/ZONE 2 PRE OUT terminalsFrom connecting block Mini plug cable ConnectingRemote controller Cabinet Signal flow Block DTR-8.3 IR Emitter Remote controllerConnecting the power cords from other devices Connections for remote controlMiscellaneous Connections RS 232 portConnecting auxiliary power amplifier Connecting to devices with analog multi channel outputConnecting to an external device with 12V Trigger terminal Miscellaneous ConnectionsTurning on the power Connecting the powerTurning on the power from the remote controller To change the display of the input source from Tape to MDDTR-8.3 Remote controller Input source buttons Master VolumeEnjoying music or videos with the DTR-8.3 Basic operationRemote controller only Changing the listening modeEnjoying music or videos with the DTR-8.3 Adjusting the bass and treble Switching the displayListening with headphones Temporarily turning off the soundUsing the sleep time remote controller only Adjusting the brightness of the front displayTemporarily changing the speaker output levels DimEnjoying the multichannel output Changing the audio modeListening to a stereo radio station FM mode Tuning into a radio stationListening to Radio Broadcasts Selecting a preset radio station Presetting a radio stationErasing a preset radio station Listening to Radio BroadcastsRec Out Recording a sourceStart recording at the recording component as desired Press the Rec Out buttonRecording a source Ex. When the CD button is pressed Using the buttons on the DTR-8.3Zone 2 indicator Off Input source buttons Enjoying music or videos in the remote zoneAdjusting the volume for the remote zone Selecting an input source using the remote controllerEnjoying music or videos in the remote zone Basic Menu Setup MenuAdvanced Menu Navigating through the Setup Menu Setup MenuWhen using the buttons on the front panel Button on remote controllerHardware Setup Menu Hardware SetupSpeaker Impedance Sub-menu IR in Setup Sub-menu Hardware SetupSurr Back/Zone 2 Sub-menu Surr Back/ZoneSpeaker Setup Menu Speaker SetupSpeaker Config Sub-menu Speaker Distance Sub-menu Speaker SetupLevel Calibration Sub-menu Press the Test button to complete the procedure CH SelCalibrating the speaker levels Press the Test buttonInput Setup Menu Input SetupInitial settings for each input source When NET Audio is not selected as the input sourceDigital Format Input SetupInput source selected Multichannel Character Input Sub-menu Video Setup Sub-menuListening Mode Preset Sub-menu IntelliVolume Sub-menuTrigger Setup sub-menu Listening Mode Relationship between input source and listening modeType of software Listening Modes Input source signalsDigital Signal Processing DSP modes Audio Adjust Menu Audio AdjustSetting Values Initial value Tone Control Sub-menuDelay Sub-menu Audio AdjustSound Effect Sub-menu LFE Level Sub-menu Theater-Dimensional Sub-menuMono Sub-menu Surround Sub-menu THX Sub-menu Listening mode Treble Setting Tone ControlBass Re-EQPreference Volume Setup Sub-menuPreference Menu OSD Setup Sub-menu Headphones Level Sub-menuPreference OSD Position Sub-menuAdjust the Settings Using the Remote ControllerTap the mode you want to use Using the Remote ControllerTo hide the Mode menu Working with ModesSelecting a Device Select a device in the Home menu Define the Brand ofYour DeviceSelect Yes to define the brand of the device to operate Tap NextSelect your brand from the list Define the Brand of Your DeviceSelect a code set from the list Defining brands by searching Tap OK when the device reactsTap Search Programming control panel buttons Programming ButtonsTo 8 inches 15 to 20 cm Programming Buttons Programming direct-access and Left/Right ButtonsProgramming device items Make sure the device tab is activeLabeling a button Labeling Buttons and Menu ItemsLabeling a menu item Edit the labelAdding devices Moving menu items Adding and Moving DevicesAdding macros Restore Delete and restoreTap the item you want to restore DeleteRecording macros Recording Macros and SettingTimersEditing macros Setting timers Recording Macros and Setting TimersOrganizing macros and timers into groups Switch to RF IR mode by using the Mode button Changing the remote controller’s RF IR SettingsTap RF Choosing Another Channel ChadEdit Additional informationOptional recharging dock USA and Canadian models only With ChadEdit you canHow do I program source switching? Can I program a button to execute more than one command?How do I reset the Remote controller? How do I revert to the original configuration?Overview of Symbols Troubleshooting guide Video and Audio Troubleshooting guideRemote controller shuts itself off General Problems Display is blankRemote controller will not edit, label or delete commands Remote controller will not switch modesIf one of the messages shown below appears All channels SpecificationsTotal harmonic distortion Than 0 % total harmonicSpecifications Onkyo U.S.A. Corporation Net-Tune Features Internet radio featuresConnecting the DTR-8.3 to your Ethernet Network Enjoying Internet radio Playing a music file saved on the Audio Network Server To cancel the operation Using the Alphanumeric keysUse the / buttons to select one of the menu Net a Select NetA on the Home menu 1/3 2/3Network Setup Menu Configuring Various SettingsProxy Setup Sub-menu Configuring Various SettingsIP Address Sub-menu MAC Address Sub-menuSpecifications Troubleshooting guideAppendix

DTR-8.3 specifications

The Integra DTR-8.3 is a sophisticated home theater receiver that exemplifies cutting-edge audio and video technologies, delivering an immersive experience for audiophiles and home cinema enthusiasts alike. As a flagship component in Integra's lineup, the DTR-8.3 combines high performance with versatile connectivity options, making it an ideal choice for modern entertainment systems.

One of the standout features of the DTR-8.3 is its robust power amplification, capable of delivering up to 100 watts per channel across nine channels. This level of power ensures dynamic sound reproduction across a wide range of audio formats, from the subtle nuances of a classical symphony to the thunderous effects of an action-packed movie. The receiver supports DTS:X and Dolby Atmos, providing object-based audio that envelops listeners in a three-dimensional soundstage. This technology enhances the overall cinematic experience, allowing sound to move freely around the listener, simulating a real-world environment.

In addition to its exemplary audio capabilities, the Integra DTR-8.3 is equipped with a full suite of video technologies. Supporting 4K Ultra HD resolution, HDR10, Dolby Vision, and BT.2020 color space, it is designed to handle the latest in high-definition video content. With full HDCP 2.2 support, users can connect their 4K Blu-ray players, gaming consoles, and streaming devices without worry. The receiver also features advanced video upscaling, transforming standard and high-definition video to near 4K quality for an enhanced viewing experience.

Connectivity is another area where the DTR-8.3 shines, with multiple HDMI inputs and outputs, including Zone 2 output for multi-room audio-video distribution. Users can easily integrate various sources, such as streaming devices, gaming consoles, and sound systems into their setup. Integrated Wi-Fi and Bluetooth capabilities enable seamless streaming of music from smartphones and tablets, while streaming services like Spotify, Pandora, and Amazon Music can be accessed directly.

The DTR-8.3 also embraces smart home integration, featuring compatibility with control systems such as Crestron, Control4, and others. This allows for easy automation and control of the receiver within a broader smart home ecosystem. For easy setup and configuration, the receiver comes with Audyssey MultEQ XT32 room correction technology. This feature analyzes the room acoustics and adjusts the sound output accordingly, ensuring optimal audio performance regardless of room conditions.

Overall, the Integra DTR-8.3 stands out as a premium home theater receiver, blending powerful audio performance, advanced video technologies, and intelligent connectivity options. It is designed for those who demand the best in their home entertainment experience, offering a truly immersive solution suitable for a wide range of applications. Whether you’re watching movies, listening to music, or gaming, the DTR-8.3 elevates sound and picture quality to new heights.
Top Page Image Contents