Configuring the speakers (DTR-6.4)
/ /
/ 
Setup Return
| Return |
|
|
|
| CH |
|
| VOL |
| Disc |
|
|
|
| Audio Sel |
|
| Muting |
| A | Angle |
| Subtitle M |
| TV / VCR |
| Level |
|
| Random |
| Audio Adjust | |
|
| Rec |
|
|
|
| Input Selector | ||
| DVD |
|
| CD |
| V 1 | V 2 | TAP | TUN |
| V 3 | V 4 | V 5 | PH |
|
| 1 | 2 | 3 |
| Pure A | Direct | Stereo | |
|
| 4 | 5 | 6 |
| SURR | THX | All ST | |
|
| 7 | 8 | 9 |
Enter |
| DSP | DSP | |
+10 | 0 | Search | ||
Display | Dimmer | Zone 2 | ||
|
| Enter | ||
Setup
/ /
/ 
ENTER
Setting the speaker distance from your normal listening position
Set the distance between the listening position and the speakers. Setting the speaker distance equates the time the sound will take to reach the listening position from each speaker, resulting in more comfortable home theater experience. The settings you made are retained also during standby state.
Each speaker can be set between 1 and 30 feet (0.3 and 9 meters) in
Notes:
•Speakers that you selected “No” or “None” for in the “Speaker Config” menu will be disabled.
•When the difference between the speaker distance values is bigger (ex. when the front speakers are far from the listening position and the surround speakers are extremely close to the listening position), the setting values for the speaker distance mayautomaticallychanged.*
1. Display the main menu
Press the Setup button on the front panel or on the remote controller to display the main menu on the monitor and the front display.
2. Use the 
and 
cursor buttons to select “3. Speaker Distance” on the main menu and then press the ENTER button.
The “Speaker Distance” menu appears.
3.Use the 
and 
cursor buttons to select “Unit” and then use the 
and 
cursor buttons to select the desired unit of measure.
feet: Select if you will enter the distances in feet.
meters: Select if you will enter the distances in meters.
4.Use the 
and 
cursor buttons to select “Left” and
then use the 
and 
cursor buttons to set the distance from the front left speaker to your normal listening position.
5.Repeat the step 4 until all the speaker distance settings are made.
•When you use one surround back speaker
The speaker distance should be set in the following order:
b.Left → c. Center → d. Right → e. Surr Right → f. Surr Back → g. Surr Left → h. Subwoofer
•When you use two surround back speakers
The speaker distance should be set in the following order:
b.Left → c. Center → d. Right → e. Surr Right → f. Surr Back R → g. Surr Back L → h. Surr Left → i. Subwoofer
6. Press the Return button to return to the main menu.
Press the Setup button on the front panel or Setup button on the remote controller to exit the Setup menu.
Go to “Calibrating the speaker levels” on next page.
*For the front L/R, center and subwoofer speakers, the speaker distance values you can set will be between the current maximum value(s) among all speakers and the values 10 feet (3 meters) lower than the current maximum value(s). For example, if the current maximum value is 30 feet (9 meters), the speaker distance values you can set will be between 20 feet (6 meters) and 30 feet (9 meters).
* Menu *****************
1.Hardware Config 2.Speaker Config
3.Speaker Distance
4.Level Calibration 5.Input Setup 6.Preference
ENTERQuit:SETUP
* Menu *****************
1.Speaker Config |
| |
3.Speaker Distance | ||
2.Speaker Distance | ||
*********************** | ||
3.Level Calibration | ||
4.Input Setup | :feet | |
a.Unit | ||
5.OSD Setup |
| :12ft |
b.Front L/R |
| |
6.Preference |
| :12ft |
c.Center |
| |
d.Surr Right |
| : 7ft |
e.Surround Back | : 7ft | |
f.Surr Left |
| : 7ft |
g.Subwoofer |
| : 7ft |
Quit:SETUP
For the surround and surround back speakers, the speaker distance values you can set will be between the current maximum value(s) among all speakers and the values 20 feet (6 meters) lower than the current maximum value(s).
Whenever you set the speaker distance value for any one of the speakers, if you enter any values higher than the current maximum value, the value you enter will be the new maximum value and any other speaker distance values you already set will automatically be adjusted to the values so that they keep the same value difference to the new maximum value as the one to the last maximum value.
52