Hamilton Beach 840115900 Plugging in the Air Purifier, Setting the Controls Manual Control Models

Page 10

840115900 ENv00.qxd 6/6/03 9:03 AM Page 10

Plugging in the Air Purifier

WARNING: To reduce the risk of electrical shock, never plug in the air purifier while your hands are wet. Always unplug the air purifier before moving or servicing the unit.

NOTE: The polarized plug will only fit in one direction—DO NOT try

to force the plug. If you are unable to insert the plug into the outlet, try reversing the plug. If the plug still does not fit, contact a qualified electrician to replace the obsolete outlet.

Setting the Controls – Manual Control Models

1.Germicidal UV Button – Turns on the germicidal UV lamp to reduce harmful bacteria from the filtered air. When this button is on, a bluish glow should be visible through the UV bulb check window on the top of the unit.

NOTE: The light will not come on if the fan is turned off.

2.UV “On” Indicator – Lights when the germicidal UV lamp is on.

3.Power On Indicator – Lights when unit is on.

4.Fan Speed Knob – Turn the fan speed knob to the desired setting. There are four settings:

•Off

•WhisperClean™ – Use for quiet, nighttime operation or for constant low-speed filtration.

•Medium – Provides a higher fan speed; use for quickly filtering dust, pollen, smoke, etc. from a room.

•QuickClean™ – Provides cleaning during acute needs.

10

Image 10

Contents Air Purifier Air Purifier Safety Important SafeguardsConsumer Safety Information This appliance is intended for household use onlyAir is cleaned in three stages To Order Replacement PartsAbout Your Air Purifier Parts and Features Know Your Air PurifierBefore First Use How to Assemble and UseSelecting the Proper Location Installing the Carbon Pre-Filter Installing the UV Bulb Touch the glass part of bulb. HandleInstalling the UV Bulb Setting the Controls Manual Control Models Plugging in the Air PurifierMedium Setting the Controls AirSmart ModelsPoor GoodCleaning the Air Purifier How to CleanCleaning the AirSmart Sensor Checking the Filters Carbon pre-filter will last approximately three monthsReplacing the Hepa Filter Replacing the UV Bulb To Install the New UV BulbTo Remove the UV Bulb Replacing the UV Starter Air Purifier Changes Speed Troubleshooting GuideAir Purifier Will Not Turn On Reduced Air Flow or Poor FilteringCustomer Service Model Type SeriesÉpurateur d’air Assemblage et fonctionnementSécurité de l’épurateur d’air Importantes InstructionsRenseignements de sécurité aux consommateurs Cet appareil est destiné à un usage domestique uniquementPropos de votre épurateur d’air Commande de pièces de rechange’air est nettoyé en trois étapes Nomenclature de l’épurateur d’air Pièces et caractéristiquesAvant la première utilisation Assemblage et fonctionnementChoix du bon endroit Installation du préfiltre à charbon Installation de l’ampoule UV Installation de l’ampoule UV suite Réglage des commandes modèles à commande manuelle Branchement de l’épurateur d’airRéglage des commandes modèles AirSmart QualitéNettoyage de l’épurateur d’air NettoyageNettoyage du capteur AirSmartTM Vérification des filtres Le préfiltre à charbon durera environ trois moisRemplacement du filtre Hepa Installation d’une nouvelle ampoule UV Remplacement de l’ampoule UVEnlèvement de l’ampoule UV Remplacement du démarreur UV ’épurateur d’air change de vitesse Dépannage’épurateur d’air ne s’allume pas Débit d’air réduit ou mauvaise filtrationService aux clients Modèle Type Série