SP6625 5 gallon RIDGID 9/16/05 2:25 PM Page 10
Hanging Vac on Storage Rack
1.Set the vac on the floor near the storage rack. Measure the distance from center of storage rack to the closest electrical outlet and add 18 inches.
Outlet
Distance
+
18 Inches
Upper Hook
Storage Rack
Rectangular
Opening in
Storage Rack
Push
Vac
Against
Storage
Rack
2.Uncoil that amount of power cord from the cord wrap. Drape the loose cord over the top of the vacuum and down the front.
3.Grasp the handle with one hand and the bottom of the vac canister at the front with the other hand. Always lift the vac with both hands. Lift the vac up to the storage rack.
4.Align the upper hook on the vac with the rectangular opening in the storage rack. Push the vac against the storage rack.
Handle
Rectangular |
Opening |
Upper
Hook
5.Lower the vac until the upper hook and lower hook are engaged and the bottom of the vac canister rests on the rack. The release tab will pop out over the flange on the motor assembly.
Storage
Rack
Release
Tab
Upper
Hook
Lower 
Hook
6.Snap the power cord into the cord retainer in the front surface of the rack. The cord may exit on either the left or right side. Plug the power cord into the electrical outlet. Do not fasten power cord to wall in any way.
Release Tab
Lower Hook
10