TYPICAL INSTALLATION
GET TO KNOW YOUR WATER HEATER - GAS MODELS
A | VENT PIPE | I | GROUND JOINT UNION | Q | |
B | DRAFT HOOD | J | DRIP LEG (SEDIMENT TRAP) |
| RELIEF VALVE |
C | ANODE | K | INNER DOOR | R | RATING PLATE |
D | HOT WATER OUTLET | L | OUTER DOOR | S | FLUE BAFFLE(S) |
E | OUTLET | M | UNION | T | THERMOSTAT |
F | INSULATION | N | INLET WATER | U | DRAIN VALVE |
G | GAS SUPPLY | O | COLD WATER INLET | V | PILOT AND MAIN BURNER |
H | MANUAL GAS | P | INLET DIP TUBE | W | FLUE |
|
|
|
| X | DRAIN PAN |
*INSTALL IN ACCORDANCE WITH LOCAL CODES.
*DRIP LEG AS REQUIRED BY LOCAL CODES.
*ALL PIPING MATERIALS TO BE SUPPLIED BY CUSTOMERS.
**CLOSED WATER SYSTEMSARE THOSE WITH BACK FLOW PREVENTION DEVICES INSTALLED IN THE INLET WATER SERVICE LINE.
FIGURE 1.
(T) THERMOSTAT
(V) PILOT & MAIN BURNER - NATURAL GAS
(V) PILOT & MAIN BURNER - PROPANE GAS
THERMOCOUPLEMAIN BURNER
PILOT
BURNER
5