Troubleshooting, Problem Cause Solution

Windsor CMPS2E, 10070560, 10070570 manual Troubleshooting, Problem Cause Solution

TROUBLESHOOTING

PROBLEM	CAUSE	SOLUTION

Loss of Power	Dead electrical circuit	Check building circuit breaker or fuse box.
Loss of Power	Faulty power cord	Replace
	GFCI breaker is tripped	Reset breaker on power cord
	Equipment not grounding	Follow grounding instructions exactly

Electrical shock	Receptacle not grounded	Contact an electrician to check building’s wiring
Electrical shock	Internal wiring problem	Have a trained service technician check machine’s
		Have a trained service technician check machine’s
		wiring
		wiring
Vac motor speed varies	Worn motor brushes	Replace
Vac motor speed varies	Motor worn out	Replace
or doesn’t run	Motor worn out	Replace
or doesn’t run	Faulty switch	Replace
	Faulty switch	Replace
	Loose vacuum dome	Center and seal dome over tank
	Vacuum circuit breaker	Reset breaker.
	tripped.	Reset breaker.
	tripped.
	Crack in dome of poor joint	Replace or repair using acrylic plastic cement only
	Lint or dirt clogging	With power off clean screen
	vacuum screen	With power off clean screen
Loss of vacuum	vacuum screen
Loss of vacuum	Loose cuffs on vacuum	Tighten cuffs turning counterclockwise
	hose	Tighten cuffs turning counterclockwise
	hose
	Vac motor seals leaking	Replace
	Floor tool vac chamber	Wash out with hose. Pick lint out with a wire
	clogged	Wash out with hose. Pick lint out with a wire
	clogged
	Vac motor, hose, or dome	Replace
	gasket	Replace
	gasket
	Pump inlet screen plugged	Clean inlet screen
	Pump circuit breaker	Reset breaker.
	tripped.	Reset breaker.
	tripped.
	Faulty pump switch.	Call for service.
Pump runs no solution	Faulty pump motor.	Call for service.
Pump runs no solution	Pump air locked	Press trigger to open valve on cleaning wand to
		Press trigger to open valve on cleaning wand to
		relieve air
		relieve air
	Internal or external	Replace
	solution line damaged and	Replace
	leaking
	Jet orifice on cleaning	Total jet opening for 100 psi should be .06 to .08
	wand is to large	Total jet opening for 100 psi should be .06 to .08
	wand is to large
	Internal pump components	Replace, see pump kit components (pg 4-3)
	wearing out	Replace, see pump kit components (pg 4-3)
Pump runs, loss of	wearing out
Pump runs, loss of	Note: Operation of pump using a wand or hand tool with an orifice of less than .06
pressure	will cause pump to cavitate or pulsate and could result in premature wear of pump
	components.
	Check valves in pump	Take piston from BPR and lubricate with Superlube.
	head for particles or cuts in	Take piston from BPR and lubricate with Superlube.
	head for particles or cuts in	If problem still exists change BPR kit
	seals	If problem still exists change BPR kit
	seals
Pump will not run	Unit not plugged in	Connect unit to 3 prong grounded outlet
Pump will not run	Loose wiring	See dealer
	Loose wiring	See dealer
Solution hose fitting hard	Corrosion on fittings.	Clean with steel wool. Soak in acetic acid (white
to connect	Corrosion on fittings.	vinegar). Lubricate lightly with silicone base lubricant.
to connect		vinegar). Lubricate lightly with silicone base lubricant.

4-6	CMPS2 86305210 11/21/07

CMPS2E, CMPS2, 10070560, 10070570 specifications

Windsor CMPS2 is a leading-edge maintenance and monitoring solution designed to optimize performance and reliability in various applications. It serves as an integral part of the Windsor family of products, featuring the model numbers CMPS2, 10070570, CMPS2E, and 10070560. This system is engineered with the latest advancements in sensor technology and data analytics, making it an ideal choice for businesses looking to enhance operational efficiency.

One of the main features of the Windsor CMPS2 is its ability to monitor performance in real-time, providing critical data and insights that allow operators to make informed decisions. The system is equipped with advanced sensors that track various parameters such as temperature, pressure, and humidity. This data is transmitted to a centralized dashboard, enabling users to visualize trends and identify potential issues before they escalate into costly problems.

The CMPS2 incorporates state-of-the-art wireless technology, allowing for seamless connectivity and integration with existing infrastructure. This feature is particularly beneficial for organizations that operate across multiple locations, as it facilitates centralized management and remote access to data. Additionally, the system supports cloud-based storage and analytics, ensuring that vital information is always accessible and can be analyzed in real-time.

Another standout characteristic of the Windsor CMPS2 is its enhanced user interface, designed for ease of use. The intuitive dashboard presents data in easily digestible formats, incorporating graphs and alert systems that notify users of critical changes. This user-centric design minimizes training time for new operators and improves overall productivity.

Moreover, the Windsor CMPS2 is built with durability and reliability in mind, featuring rugged components that can withstand harsh operational environments. Its robust construction guarantees prolonged life and reduced maintenance costs, making it a cost-effective solution for businesses of all sizes.

In summary, the Windsor CMPS2, along with model numbers 10070570, CMPS2E, and 10070560, offers an array of sophisticated features, including real-time monitoring, advanced sensors, wireless connectivity, and a user-friendly interface. With its emphasis on performance optimization and ease of use, the Windsor CMPS2 stands out as a versatile tool that can significantly enhance operational efficiency and reliability across various industries.

TROUBLESHOOTING

PROBLEM

CAUSE

SOLUTION

CMPS2 86305210 11/21/07

CMPS2E, CMPS2, 10070560, 10070570 specifications