Windsor 10052290 Scrub Brushes, Uncoated Floors, Finished Floors, Recovery Tank Float SHUT-OFF

Page 26

MAINTENANCE

4.SCRUB BRUSHES

There are four different types of brushes available to cover applications from cleaning heavily soiled floors to polishing. A pad driver is also available to take advantage of the many cleaning pads on the market. Please refer to the following to assist in selecting the proper brush or pad for the work at hand.

UNCOATED FLOORS

Aggressive Grit is a nylon fiber impregnated with silicone carbide grit. It grinds away stain, soil, and removes surface material.

Mild Grit is a less aggressive silicone carbide grit suitable for cleaning medium soil conditions. Advantages are faster ground speed than nylon bristles on light solid applications.

Polypropylene is a general-purpose scrub brush with stiff bristles. Polypropylene works well for maintaining concrete, wood and tile floors.

FINISHED FLOORS

Nylon bristles are used in a variety of applications on coated or uncoated surfaces.

White Pads (Polishing) are used for dry polishing to achieve a high-gloss appearance, or surface washing on highly polished or burnished floors.

Red Pads (Buffing) are used for light-duty scrubbing. When used with a mild detergent they will provide surface cleaning without removing the finish.

Blue Pads (Scrubbing) are used for heavy-duty scrubbing and light stripping. The blue pads remove less finish than brown stripping pads, yet will remove black marks, stains and dirt.

Black Pads (Stripping) are used for easy and complete removal of old floor waxes/finishes. They will quickly remove ground in dirt, black heel marks, and spills. When used with the proper stripper, this pad leaves the floor clean and ready for finishing.

The scrub brushes should be checked before each days work for wire, string, wear and damage.

REPLACING OR INSTALLING SCRUB BRUSHES

1.With the scrub deck up, turn “OFF” the machine.

FOR SAFETY: Before leaving or servicing the machine; stop on level surface, turn OFF machine and remove key.

2.Remove the two brush cover shrouds.

3.Locate release lever on top of brush or pad driver. Rotate release lever counter-clockwise and the brush/pad driver will release and drop down.

4.To reinstall, center the brush driver under the brush drive hub. Raise until it contacts brush driver assembly. Turn clockwise until release lever plate locks into position.

5.Replace the two brush cover shrouds.

NOTE: Check that release plate is completely closed and pad/brush is securely attached. Damage to driver or brush could occur.

5. RECOVERY TANK FLOAT SHUT-OFF

When water is no longer being vacuumed from the floor and the vacuum fan is operating, the ball float has engaged. The vacuum motor will not vacuum water with recovery tank full. The recovery tank must be drained.

1.The float shut-off screen can be cleaned in or out of the machine.

2.To clean the float shut-off while it is inside the machine wipe material off screen then rinse. Check that the ball is also clean and moves freely.

3.To remove the float shut-off, grasp the screen with one hand and the connected tube with the other. Tilt and pull the float screen assembly to pull it off the barb on the tube.

To install, place one hand on the tube, and then tilt and push the float screen assembly over the barb on the tube.

4-8

CUTTER 24V (SCE) 86037020 04/04/07

 

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Walk Behind Scrubber Overview Machine Data LOG/OVERVIEWYour Dealer Table of Contents HOW to USE this Manual ModelImportant Safety Instructions Read ALL Instructions Before Using this MachineHazard Intensity Level Hazard Intensity LevelSafety Label Location Technical Specifications DIMENSION/CAPACITYSpecial Notes MeasureHOW the Machine Works Components Controls Brush Switch KEY SwitchEmergency SHUT-OFF Switch Squeegee Pitch Adjustment Knob Solution Control KnobVacuum Switch Squeegee Deflection Adjustment KnobsHour Meter Brush Pressure IndicatorParking Brake Machine Operation Emergency Stop ProceduresFilling Solution Tank PRE-RUN Machine InspectionTo Stop Scrubbing Normal ScrubbingTo Begin Scrubbing Double Scrub Recovery TankEmptying and Cleaning Tanks Maintenance Daily Service ScheduleMaintenance WeeklyMaintenance Battery Maintenance BatteriesTo Charge the Batteries Checking Battery Specific GravityBattery Condition Checking GravityChanging Batteries Squeegee Blades Adjusting SqueegeeTo Remove Squeegee Assembly To Replace or Rotate Rear Squeegee BladesTo Replace AQUA-MIZER Squeegee Blades To Adjust Squeegee PitchTo Adjust Amount of Rear Squeegee Deflection Scrub Brushes Replacing or Installing Scrub BrushesRecovery Tank Float SHUT-OFF Uncoated FloorsBrush Motor Solution StrainerBrush Motor Carbon Brush Replacement Changing Brush MotorsCircuit Breakers Traction Motor Carbon Brush ReplacementTraction Motor Brush Shrouds & Brush SkirtsVacuum Motor Changing Vacuum MotorActuator Scrub Deck REMOVAL/REPLACEMENT Scrub Deck Actuator AdjustmentRecommended Greasing Machine Troubleshooting Problem Cause SolutionMachine Troubleshooting

86037020, SCEX324, 10052290, SCEOX324, SCEX264 specifications

The Windsor SCEOX264, SCEX324, SCEX264, 86037020, and 10052320 are advanced technology solutions that cater to modern computational and networking needs. Each model showcases a unique combination of features designed to optimize performance, efficiency, and user experience.

The SCEOX264 stands out with its focus on high-definition video processing. Equipped with an exceptional decoding capability, it handles multiple formats while maintaining superior image quality. The integrated algorithms enhance video rendering, reducing latency and minimizing buffer times. This makes it ideal for applications in broadcasting and video conferencing, where seamless visual communication is essential.

The SCEX324, on the other hand, is designed for robust data storage and management. It supports a wide array of storage configurations, ensuring high data availability and security. Featuring cutting-edge encryption technologies, SCEX324 guarantees that sensitive information remains protected against unauthorized access. Its rapid access times and scalability make it suitable for enterprises needing agile data solutions.

The SCEX264 is renowned for its comprehensive connectivity capabilities. With support for multiple network protocols, it seamlessly integrates into diverse environments. The unit's ability to handle large data streams allows for smooth connectivity even during peak usage times, making it perfect for organizations embracing digital transformation.

Models 86037020 and 10052320 further enhance the lineup with their specialized functionalities. 86037020 focuses on energy efficiency, using advanced power management technologies to reduce operational costs without sacrificing performance. Its environmentally friendly design aligns with sustainability goals pursued by many modern organizations.

In contrast, 10052320 emphasizes user interface and experience. It features an intuitive design that simplifies interactions, reducing the learning curve for users. Its compatibility with various operating systems ensures versatility across different platforms, making it an ideal choice for diverse corporate ecosystems.

Collectively, these models reflect a commitment to innovation and quality, making them viable options for businesses looking to upgrade their technological infrastructure. They not only address the growing demand for high performance and security but also pave the way for future advancements in computing and data management. With a focus on user-centric design and advanced functionalities, these models are tailored for success in an increasingly digital world.
Top Page Image Contents