Yeoman YM-CL8W, YM-CL5W, YM-CL8MF Cleaning Glass, Chimney Sweeping, Care of stove Seasonal use

Page 10

USER INSTRUCTIONS

Check for obvious build up of soot, ash or debris above the flue baffle(s) (these can be found in the upper part of the firebox). Use a torch if necessary.

If there are any signs of a build up of debris above the flue baffle(s) either:

Arrange for the chimney to be swept (see User Instructions, Section 13).

Remove the baffle and clear the debris (see Installation Instructions, Section 4).

To refresh painted finishes use Stovax Riva Midnight black metallic paint.

Wipe dry with a soft clean cloth be fore relighting. Always dry appliance to avoid rust.

Do not use abrasive cleaner or cleaning pads.

Check that the door shuts properly and creates an effective seal. Leaking door seals prevent the appliance working properly.

Do not use aerosol sprays near an operating appliance.

12. CLEANING GLASS

Keep the glass clean with correct use of the Airwash system and good quality fuel.

12.1Sometimes additional cleaning may be required. This can be done as follows:

Allow appliance to cool fully. Do not clean hot glass.

Use a soft cloth and suitable cleaner.

12.2Do not use cleaning agents that have a high alkaline content, for example Stovax Gel Cleaner, on appliances with painted glass such as the Studio, View or CL. These are abrasive cleaning agents that are designed to be used with heavily stained clear glass. Use Stovax Glass Cleaner (Stovax No.4103) on more delicate surfaces.

Do not use acidic cleaners on printed glass.

12.3Before re-lighting the appliance dry the glass fully.

13.CHIMNEY SWEEPING

13.1To maintain safe and efficient use of the appliance, the chimney/flue must be inspected and swept at least once a year by a qualified chimney sweep**.

If the appliance is used continuously throughout the year, or it is used to burn wood or smokeless fuel, more frequent sweeping is recommended.

The best time to have the chimney swept is at the start of the heating season.

The above applies even if burning smokeless fuels.

13.2The chimney, any connecting flue pipe and the appliance flue ways, if incorporated, must be regularly cleaned.

13.3Ensure adequate access for cleaning where it is not possible to sweep through the chimney.

13.4If the chimney is believed to have previously served an open fire it must be swept a second time within a month of regular use after installation.

14. Care of stove

Stovax has a range of cleaning and maintenance products and accessories to keep your appliance in good working order. Your Stovax retailer can advise you on suitable items for your stove and provide genuine spare parts such as replacement glass, door sealing rope and firebricks. View the extensive range at www.stovax.com by clicking on Accessories. In addition, an annual service by a competent engineer is recommended to keep your stove in the best possible condition.

15.Seasonal use

15.1Clean and service the appliance if it is not used during the warmer periods of the year, as detailed in the Maintenance and Servicing section.

15.2Set the air controls to 50% to keep the appliance ventilated and stop the build-up of any moisture inside.

15.3Before re-lighting the appliance:

Remove the baffle.

Clear any debris that may have accumulated.

Check the flue is clear of any blockages.

In the U.K.

*Registered on the Competent Persons Scheme (GB only) see page 11 / INFO (Republic of Ireland).

**This should be done by a HETAS registered chimney sweep, see page 11, who will issue you with a certificate.

10

Image 10
Contents Yeoman CL Models YM-CL3MF / YM-CL5W / YM-CL5MF / YM-CL8W / YM-CL8MFPRE-INSTALLATION Appliance Commissioning Checklist User InstructionsInstallation Instructions Technical InstallationRetailer appliance was purchased from Appliance Commissioning ChecklistInstallation Engineer Essential Information Must be completedSerial Number User InstructionsGeneral Points AIR ControlsUsing the Appliance for the First Time Recommended FuelsLighting the Appliance Running The appliance Refuel little and often for clean, efficient burningBurning Wood Burning tips Extended burning General CleaningASH Removal OVER-FIRINGChimney Sweeping Cleaning GlassCare of stove Seasonal use Troubleshooting tips Smoke Control kitYeoman TECHNICAL SPECIFICATIONStandard Features Packing ListYeoman Dimensions DescriptionMax. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.K Site RequirementsFlue or Chimney Flue PlateHearth Dimensions Flue Outlet PositionsWalls Next to a Hearth Distance of Appliance to wallVentilation PRE-INSTALLATION ChecksFlue Flue / Chimney SizeTraditionally Built Homes Fitting Appliances on a boatModern Construction Homes Top flue pipe installation Installation InstructionsInstalling the Appliance Legal requirementsRear flue pipe installation Do not use a 90˚elbow to make this connectionFitting and Removal of the Baffle Fitting and Removal of the FirebricksRemoval of Riddling Mechanism Main grate Hearth FixingReplace in reverse order Cast TOP Co alarmsBS EN50292 and from the alarm manufacturers instructions Top Flue Rear FlueCommissioning CommissioningRecord serial number in Appliance Commissioning Annual Service Fitting and Removal of Baffle Removal of the LOG GuardFitting and Removal of Firebricks Fitting a NEW Door GlassFitting a new door seal Do not over tighten the clamp as this could break the glassStove body Adjusting Door Catch & HingesTo adjust the door hinge plate assembly Half lock nuts Dome catchSpares List YM-CL3MFYM-CL5W YM-CL3 YM-CL5Service Records

YM-CL5W, YM-CL5MF, YM-CL8W, YM-CL8MF, YM-CL3MF specifications

The Yeoman YM-CL8MF, YM-CL3MF, YM-CL5MF, YM-CL5W, and YM-CL8W represent a series of technologically advanced and versatile machines that epitomize the modern engineering capabilities of Yeoman. These models have been designed for a range of agricultural and industrial applications, making them essential tools for farmers and businesses alike.

Starting with the YM-CL8MF, this model is known for its high performance and robust construction. It features an efficient engine that maximizes fuel efficiency while ensuring ample power for demanding tasks. The advanced hydraulic system allows for smooth operation and effective handling of attachments, making it suitable for a wide variety of applications, from heavy tillage to transportation.

The YM-CL3MF is a more compact option that does not compromise on power. It boasts a user-friendly interface and excellent maneuverability, making it ideal for smaller farms and tight spaces. Its low center of gravity enhances stability, while the durable build ensures resilience even in harsh conditions. This model is particularly favored for its agility and ease of use.

The YM-CL5MF strikes a balance between power and size, equipped with features designed for efficiency in both fieldwork and logistics. Its multifunctional capabilities allow operators to seamlessly switch between tasks such as plowing, harvesting, and loading. The advanced transmission provides smooth gear shifts, enhancing overall performance and operator satisfaction.

On the other hand, the YM-CL5W offers a versatile wheeled option that provides added flexibility in various terrains. Its presence is well-noted in both agricultural and municipal applications, as it can easily adapt to both crop and utility tasks. The outstanding traction and stability make it suitable for diverse environments, ensuring that operators can efficiently handle their workload.

Lastly, the YM-CL8W combines the features of its counterparts with enhanced power and capacity. This model is designed for heavier workloads and is equipped with cutting-edge technology to maximize productivity. It has a spacious operator platform for comfort during long working hours, along with an intuitive control system that simplifies operation and boosts efficiency.

Overall, these Yeoman models represent an impressive blend of power, efficiency, and versatility. Their innovative technologies and practical features cater to the evolving needs of users, solidifying Yeoman's reputation in the agricultural and industrial machinery market. Whether it’s for small farms or large-scale operations, these machines deliver performance that professionals can rely on.