Yeoman YM-CL8W, YM-CL5W, YM-CL8MF, YM-CL3MF, YM-CL5MF manual Annual Service

MAINTENANCE and SERVICING

For a complete list of spare parts and accessories contact your Yeoman retailer or call 01392 474011

1.ANNUAL SERVICE

1.1Before the start of the heating season strip, inspect and clean the appliance as detailed:

—Allow appliance to cool.

—Remove all internal parts: baffle, log guard and, for multi-fuel versions, grate system and ashpan

(see Installation Instructions, Sections 2, 3, 4, 5). Take care handling firebricks as they can become fragile after a period of use.

—Sweep the appliance at this point if necessary.

—Vacuum clean any remaining ash and debris from the inside of the appliance. Stovax offer a filter/ collection attachment for vacuum cleaners to protect them from fire ash: Ash Clean (Stovax Part No. 2091).

—Clean the internal surfaces of the appliance using a wire brush and scraper as required. Vacuum and brush the resulting debris from the appliance.

—Clean the grate parts with a wire brush, and check the parts for any damage. Replace any damaged parts using genuine Stovax replacements parts (see below for details).

—Check and clean the firebricks with a soft brush. Some surface damage will occur during use. The life of the bricks will depend on the type of fuels burnt and the level of use. Replace damaged bricks as soon as possible.

—Re-fit cleaned internal parts.

—Remove glass from door, discard all old rope seals and fit new (see Maintenance and Servicing, Section 5).

—Clean the door glass using Stovax Glass Cleaner and a soft cloth.

—Do not use cleaning agents that have a high alkaline content, for example Stovax Gel Cleaner, on appliances with painted glass such as the Studio, View or CL. These are abrasive cleaning agents that

are designed to be used with heavily stained clear glass. Use Stovax Glass Cleaner (Stovax No.4103) on more delicate surfaces.

Do not use acidic cleaners on printed glass.

—Fit new door rope seal (see Maintenance and Servicing, Section 6).

—Lightly oil the door catch mechanism and hinge pins. Avoid getting oil onto the door seals and glass.

—To refresh painted finishes use Stovax Riva Midnight black paint.

1.2Use genuine Stovax replacement parts to keep the appliance in safe, efficient working order. This is a list of the maintenance products that may need be required:

This is a list of the maintenance products you may need to use:

Task	Product name	Stovax Code
		Number
Glass cleaning	Stove glass cleaner	4103
	(spray on))
Preventing build-	Protector (15 sachets)	7002
up of creosote in
	Protector (1kg tub)	7025
flue
Sealing flue pipe	Fire Cement (500g tub)	2020
joints	Fire Cement (600g cartridge)	2021
Re-painting	Riva Midnight Black	RVAC011
	(150ml aerosol)
Protecting your	Heat resistant leather gloves	YM-E00007
hands
Ash Clean	Vacuum Cleaner Attachment	2091
Thermic seal glue	(50ml bottle)	5037
	14mm Black rope seal	5000
	(handy pack)
Door sealing rope
	14mm Black rope seal	4670H
	(25m reel)
	15mm x 2mm x 2m	4950
Glass sealing rope
	15mm x 2mm x 25m	4954
Mid door sealing	15mm x 2mm x 2m	4952
rope	15mm x 2mm x 25m	4957

These products, available from your local Yeoman retailer, along with regular maintenance and use of correct fuels, will keep the appliance in the best possible condition.

1.3For more information about the Yeoman products please visit our web site at www.yeoman-stoves.co.uk

1.4Burn at a low temperature for the first day of use after any maintenance. This allows the seals, fixing glues and paint to fully cure.

25