Wayne-Dalton 9800 installation instructions Installation, Horizontal Angles

Page 6

Installation

Begin the installation of the door by checking the opening. It must be the same size as the door. Vertical jambs must be plumb with header. Side clearance, from edge of door to wall, must be a minimum of 3-1/2” (89mm) on each side.

IMPORTANT: Stainless steel or PT 2000 coated lag screws MUST be used when installing center bearing brackets, end brackets, jamb brackets, operator mounting/support brackets and disconnect brackets on treated lumber (preservative-treated). Stainless steel or pt 2000 coated lag screws are NOT necessary when installing products on untreated lumber.

NOTE: It is recommended that 5/16” lag screws be pilot drilled using a 3/16” drill bit prior to fastening.

NOTE: Use this manual in conjunction with the windload specification options code provided with your door.

1

Horizontal Angles

 

HOrizontal Angle

 

 

 

 

tab

Tools Needed:

Position the horizontal angle as shown.

hole

 

Hammer

Place tabs of horizontal angle in the key

 

 

 

slots of horizontal track.

 

 

 

 

 

key slot

 

Using a hammer, tap the horizontal

 

horizontal TRACK

 

angle towards the curved end of the

hole

 

track until the holes in track and angle

 

horizontal

 

are aligned. Set tracks aside.

 

 

 

 

TRACK

NOTE: The horizontal angle may be spot welded to the horizontal track. If the horizontal angle is not welded, the horizontal angle will be installed as shown.

HOrizontal Angle

horizontal

 

horizontal

 

TRACK

 

 

 

 

angle

 

 

 

horizontal

 

 

hole

TRACK

 

 

 

 

 

aligned

 

 

tab

 

 

6

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com

Image 6
Contents Light Commercial Windload To avoid possible PRE-INSTALLATION Door Section Identification Tools RequiredRemoving An Existing Door Installation Horizontal AnglesCounterbalance Cables Bars14 x 7/8 self drilling screws Vertical Track Assembly Bottom SectionStacking Sections Other side Endcap and fasten usingTop Brackets Tightened in stepOperator Bracket Section of the DOOR, AlongProperly Important the Dimension Top SectionDoor Operation Do not Raise Door Until InjuryAdjusting Top Brackets Torsion End Bearing BracketsTorsion Spring Assembly Center Bearing BracketSide Nylon Center Bushing Securing Door For Spring WindingWinding Torsion Springs Systems service technicianUsing proper tools Instructions Severe or fatal injury To avoid possible severe orResult in door falling Rear SupportRaising door further can Cause severe or fatal injury24 Max 24 MaxSide Lock Pull RopeTrolley Operator Installation and MonthlyInstallation Instructions Failure to Test or Make ANYAcrylic Cleaning Instructions Cleaning Your Steel And Fiberglass Garage DoorGlass Cleaning Instructions Important do not USE a Pressure Washer on Garage DoorSteel Preparation For Painting Fiberglass Refinishing And Or FinishingRefinishing
Related manuals
Manual 32 pages 11.46 Kb Manual 20 pages 42.88 Kb Manual 4 pages 60.02 Kb Manual 38 pages 17.26 Kb Manual 18 pages 4.37 Kb

9800 specifications

Wayne-Dalton is a well-known brand in the garage door industry, offering a wide range of models designed for durability, performance, and aesthetic appeal. Among its most popular series are the 9700, 5000, 8000, 9000, and 9800, each equipped with unique features and advanced technologies to meet diverse customer needs.

The Wayne-Dalton 9700 series is known for its combination of strength and insulation. This garage door is manufactured with a three-layer construction providing robust protection against the elements while offering excellent energy efficiency. The insulated steel construction can help maintain interior temperatures, making it ideal for attached garages.

The 5000 series, on the other hand, is designed for a more traditional look combined with modern performance. Featuring a lightweight design, it is made from durable materials that resist rust and corrosion. The 5000 series can be customized with different colors and styles, allowing homeowners to achieve the perfect aesthetic to enhance their property.

Moving on to the 8000 series, this model is designed for commercial applications and residential use where heavy-duty functions are necessary. It is built to withstand extreme weather conditions while providing optimal security with added strength features. The 8000 series offers smooth operation and minimal maintenance requirements, making it a great choice for those seeking reliability.

The 9000 series stands out with its stylish design and sleek finishes. This series offers advanced insulation options, coupled with numerous panel designs that provide a polished and sophisticated look. The 9000 model emphasizes both aesthetics and energy efficiency, making it a favorite among homeowners looking for a beautiful yet functional garage door.

Lastly, the 9800 series is the premium option within Wayne-Dalton’s offerings. This series is characterized by its high insulation value and thermal efficiency, thanks to its innovative construction techniques. The 9800 doors can be customized with numerous panel options and colors, delivering a luxury look while ensuring excellent performance.

In conclusion, Wayne-Dalton’s 9700, 5000, 8000, 9000, and 9800 series garage doors each feature distinctive characteristics and technologies aimed at enhancing durability, security, and aesthetics. Homeowners can find a reliable option within this range that suits their specific requirements, whether they prioritize insulation, style, or heavy-duty functionality. With Wayne-Dalton’s commitment to quality and innovation, these garage doors stand out in today’s market.