Wayne 321304-001 specifications Description, Safety Guidelines, Specifications, Installation

Page 1

Operating Instructions and Parts Manual

Cast Iron Utility Series

 

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop- erty damage! Retain instructions for future reference.

Self-Priming Portable

Utility Pump

Description

This self-priming portable utility pump is designed to be used as a transfer pump for such applications as emptying water heaters, swimming pools, live- stock tanks, boats, etc. Pump can also be used for an intermittent pressure boost for applications such as washing cars, cleaning driveways, etc. The motor is air cooled; it is not designed to oper- ate under water.

NOTE: This pump is not intended for permanent installation or long, extend- ed periods of continuous operation.

Safety Guidelines

This manual contains information that is very important to know and under- stand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this infor- mation, observe the following symbols.

Danger indicates an imminently haz-

ardous situation which, if not avoided, will result in death or serious injury.

Warning indicates a potentially haz-

ardous situation which, if not avoided, could result in death or serious injury.

Caution indicates a potentially haz-

ardous situation which, if not avoided, may result in minor or moderate injury.

Specifications

Notice indicates important informa-

tion, that if not followed, may cause

damage to equipment.

General Safety

Information

Do not submerge motor or allow

motor to be exposed to water. Personal injury and/or death could result.

Do not use to pump flam- mable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use

in a flammable and/or explosive atmos- phere. Pump should only be used to pump clear water. Personal injury and/or death could result.

Risk of electrical shock. All wiring

must be performed by a qualified elec- trician.

Do not walk on wet areas until all power is turned off. Failure to fol- low this warning could result in fatal electrical shock.

1.Read all instructions before operation.

2.Disconnect power and release all pressure within the system before servicing any component.

3.Drain all liquids from system before servicing.

Secure the dis- charge line before

starting the pump. An unsecured dis- charge line may whip. Personal injury and/or property damage could result.

4.Periodically inspect pump and sys- tem components, checking for weak and/or worn hoses. Insure all connections are secure.

5.Provide a means of pressure relief in the case of an obstructed dis- charge line.

6.Protect electrical cord from sharp objects, hot surfaces, oil and chemi- cals. Avoid kinking the cord and replace damaged cords immediately.

Installation

Always disconnect power source before attempting to install, service, or maintain the pump. Never handle a pump with wet hands or when standing on wet or damp sur- face or in water. Fatal electrical shock could occur.

1.A ground fault circuit interrupter (GFCI) is required.

Risk of electrical shock! This pump is supplied with a grounding conduc

Motor . . . . . . . . . . . . . .Single Phase - 115V, 60 Hz, 8,000 RPM . . . .Horsepower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/2 HP Motor . . . . . . . . .Series Wound (brush type) AC/DC Operation . . . .Inlet/Outlet Openings . . . . . . . . . . . . . . . . . . . . . . .3/4” NPT Impeller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SAN . . . .Pump Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cast iron Motor Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cast iron . . . .Motor Shaft . . . . . . . . . . . . . . . . . . . . . . . .Cold rolled steel Shaft and Volute Seal . . . . . . . . . . . . . . . . . . . . . . . . . . .Buna-N . . . .Motor Bearings . . . . . . . . . . . . . . . .Permanently lubricated Maximum Fluid Temperature . . . . . . . . . . . . . . . . . . . . . .120˚F . . . .

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

© 2005 Wayne Water Systems

For parts, product & service information

321304-001 1/05

visit www.waynepumps.com

Image 1
Contents Specifications Safety GuidelinesGeneral Safety Information InstallationWire Size #18 #16 #14 #12 Length 25 ft 50 ft 100 ft 150 ft MaintenanceBrush Replacement OperationAdditional Repairs Troubleshooting ChartDescription Part Number Quantity For Replacement Parts, callGénéralités sur la Sécurité Directives de SécuritéSpécifications Série En Fonte Tout UsageRemplacement DES Balais Installation SuiteEntretien FonctionnementGuide de Dépannage Entretien SuiteTeel Instructions d’Utilisation et Manuel de Pièces Réparations AdditionnellesNo. de Numéro Réf Description De Pièce Qté Pour pièces de rechange, composerMedidas de Seguridad DescripciónInformaciones Generales de Seguridad InstalaciónMantenimiento FuncionamientoTabla DE LAS Longitudes DE LOS Cordones DE Extensión Tamaño del alambre #18 #16 #14 #12Reparaciones Adicionales Guía de Diagnóstico de AveríasNo. de Número Descripción Del repuesto Ctd Para ordenar repuestos en EUA Llame al Teléfono

321304-001, Cast Iron Utility Series specifications

Wayne Cast Iron Utility Series, model 321304-001, is a highly reliable and robust pump designed to meet the demanding needs of residential and commercial applications. This utility pump excels in managing water transfer, dewatering, and draining tasks, making it an indispensable tool for homeowners, contractors, and facilities managers.

One of the standout features of the Wayne 321304-001 is its durable cast iron construction. This material not only enhances the longevity of the pump but also provides superior resistance to rust and corrosion, making it ideal for use in various environments. The heavy-duty design ensures that the pump can withstand wear and tear, particularly in challenging conditions, ensuring uninterrupted service.

The pump is equipped with a powerful motor, delivering a high flow rate, which means it can move a significant volume of water quickly and efficiently. This efficiency is particularly beneficial in situations where time is of the essence, such as during flooding or when draining a pool. The motor is thermally protected, preventing overheating and ensuring prolonged operation without the risk of damage.

The Wayne Cast Iron Utility Series also includes easy-to-understand operational features. The integrated float switch automates the activation and deactivation of the pump based on water levels, reducing the need for manual intervention. This feature ensures that the pump operates only when necessary, conserving energy and enhancing its overall efficiency.

In addition to its functional design, the pump is user-friendly, allowing for straightforward installation and maintenance. Its compact size facilitates portability, making it easy to transport between job sites or store when not in use. This versatility adds to the pump's appeal for both residential and commercial uses.

Another noteworthy characteristic of the Wayne 321304-001 is its capability to handle solids. With a robust design, it can handle small debris, making it suitable for various applications without the risk of clogging.

In summary, the Wayne Cast Iron Utility Series model 321304-001 combines durability, high performance, and user-centric features, making it a top choice for anyone looking for a dependable utility pump. Its cast iron construction, powerful motor, automated float switch, and user-friendly design cement its status as a reliable solution for all water management needs. Whether for flood recovery, draining tasks, or general water transfer, this utility pump stands out as an essential tool for homeowners and professionals alike.