Furuno SC-110 manual MAINTENANCE, Troubleshooting, Preventive Maintenance

Page 51

3MAINTENANCE, TROUBLESHOOTING

WARNING

ELECTRICAL SHOCK HAZARD

Do not open the equipment.

Only qualified personnel should work inside the equipment.

3.1Preventive Maintenance

Regular maintenance is important for good performance. A maintenance program should be established and should include the following points.

Check connectors and ground terminal on the processor unit and display unit for tightness.

Check ground terminal for rust. Clean or replace as necessary.

Check for water leakage in the antenna cable. Replace the cable if there are signs of water leakage.

Remove dust and dirt from the display unit and processor unit with a dry, soft cloth. For the LCD, wipe it carefully to prevent scratching, using tissue paper and an LCD cleaner. To remove stubborn dirt, use an LCD cleaner, wiping slowly with tissue paper so as to dissolve the dirt. Change paper frequently so the dirt will not scratch the LCD. Do not use chemical cleaners for cleaning - they can remove paint and markings.

3-1

Image 51
Contents THD Satellite Compass 00014854600 Safety Instructions Table of Contents Iii MAINTENANCE, TroubleshootingFeatures ForewordWord to the Owner of the SC-110 System configuration System ConfigurationName Type Code No Qty Remarks Equipment ListStandard supply Optional equipmentSC-110 Specifications of THD Satellite CompassCoating Color Installation Mounting ConsiderationsAntenna unit Mast diameter Separation distance minimum Separation degreesAntenna and field of view Display unit, processor unit Example of antenna installed below superstructuresInstallation post Installing the Antenna UnitFastening antenna unit to a post Fix the antenna unit to the post as shown belowAntenna element Coating bolt, nut and washer with silicone rubberInstalling the Processor Unit Bulkhead mountBulkhead mount Processor unit orientation, deck mounting Deck mountInstallation on the underside of a desk Installation of processor unit on the underside of a deskMounting on underside of desk Flush mount F Installing the Display UnitDesktop, overhead mounting Flush mountFlush mount S Flush mount S kit Type OP20-17, Code NoFlush mount S Wiring WiringSectional view of coaxial cable DPYC-1.5 How to install the optional antenna cable setHow to attach connector N-P-8DFB How to attach connector N-P-8DFBInitial Settings Confirming satellite statusSatellite tracking status display Installation setup menu Choosing mounting methodMain menu General wiring Connection of External EquipmentProcessor unit, cover opened Cable Sectional view, fabrication Fabrication of cablesOperation ControlsDisplay unit Turning the Power On/Off Panel Illumination, Display ContrastProcessor unit Nav data display Choosing a DisplayDescription of displays Heading displaySteering display Compass displayROT Rate-of-Turn display SOG/STW display Speed displayBuzzer options Alarm SetupAlarm menu Dgps alarm optionsSatellite status display Confirming Satellite StatusGPS Setup Displaying the GPS setup menuGPS Setup menu description Disable SV Disable satellite Output DataHeading Baud rate options Data OUT1 menu, sentencesTx interval options IEC, Nmea version optionsHeading talker options Sentence and maximum number of characters Output sentence limitationLog pulse options Log pulseSystem Setup System Setup menuGeodetic data Using local time Units of measurementTime format Demonstration mode Waas Search options WAAS/DGPS SetupPosition fix mode options WAAS/DGPS menuProvider GEO Satellite Longitude GEO satellite and coverage areaAUTO/MANUAL options Operation Others Menu Others menuHDG Restoration options Trip menu Trip MenuHeading setup menu Resetting Distance RunChoosing External Heading Source for Backup Reset Distance promptPreventive Maintenance MAINTENANCE, TroubleshootingTroubleshooting TroubleshootingSymptom Cause Remedy Test start prompt DiagnosticsDiagnostic test1 Test menu optionsDisplay Test Program Number Display Diagnostic test sequenceTEST2 display Diagnostic test2Diagnostic test3 Alarm optionsTEST3 menu Prompts for erasure of data Program NumberClearing Data Program version no. displayPrompt for turning off the power Replacement of BatteryBattery Location Type Code No Prompt for exchanging batteryMessage display Replacement of FuseError Messages Error Message Meaning RemedyData ERR Error messages con’t from previousAppendix Menu TreeAP-1 Digital Interface Data Out Schematic diagramsAP-3 DataAP-4 Data sentencesGNS Gnns fix data AP-5VBW Dual ground/water speed AP-6VLW Distance travelled through the water AP-7Port Terminal Name Signal Remarks Label Input/Output PortsAP-8 Hdthdghdm AP-9Parts List and Parts Location AP-10Processor Unit, cover removed Display Unit, cover opened AP-11AP-12 Geodetic Chart CodesAP-13 Principle of Satellite CompassAP-14 What is WAAS?Packing List Page 工事材料表 SC-502-J/E 20AY-X-9404 SC-1101-J/E 20AY-X-9401 Spare Parts List for 20AT-X-9411 フラッシュマウントキット 20AY-X-9403 Hatai Page Page Page Page Display Unit IN-1 Index
Related manuals
Manual 89 pages 1.46 Kb

SC-110 specifications

The Furuno SC-110 is a sophisticated marine navigation system designed for a wide array of maritime applications. This advanced device showcases Furuno’s commitment to quality and innovation, making it a popular choice among boat owners, commercial vessels, and maritime professionals.

At the heart of the SC-110 is its precise Positioning Differential GPS (DGPS) technology. This cutting-edge systems enhances the accuracy of standard GPS operations, enabling users to obtain real-time positioning with an impressive level of precision. The SC-110 offers positioning accuracy within one meter, vital for navigation safety and efficiency, particularly in congested or challenging maritime environments.

One of the standout features of the Furuno SC-110 is its built-in Automatic Identification System (AIS) capability. AIS technology allows the SC-110 to display real-time information about nearby vessels, including their position, course, and speed. This additional situational awareness helps mariners avoid potential collisions, making it an essential component for navigation in busy shipping lanes.

The device also incorporates a user-friendly interface, characterized by a sharp, high-resolution display that is easy to read in various lighting conditions. This ensures that maritime operators can access critical navigation data quickly and without confusion. Additionally, customizable settings allow users to tailor the system to their specific needs, improving overall usability.

Another significant aspect of the Furuno SC-110 is its robust integration capabilities. The system can seamlessly connect with other onboard electronic equipment, such as radar systems, chart plotters, and autopilots. This interoperability enhances operational efficiency, allowing mariners to control all their navigational tools from a singular platform.

The SC-110 is designed to withstand the rigors of the marine environment. Built with durable materials and an IP67 waterproof rating, it provides reliable performance even in harsh weather conditions. This resilience ensures that the system will serve maritime operators effectively over time without compromising functionality.

In summary, the Furuno SC-110 represents a blend of advanced technology and practical usability. Its high-precision DGPS, AIS integration, user-friendly interface, and robust construction make it an invaluable tool for safe and efficient maritime navigation. Whether for leisure boating or commercial operations, the SC-110 stands as a testament to Furuno’s expertise in the marine electronics field.