Furuno SC-110 manual Installing the Antenna Unit, Installation post

Page 14

1. INSTALLATION

1.2Installing the Antenna Unit

Note: “Bird-repellent fixtures” may be attached to each antenna element and the center cover to prevent birds from alighting on them. If it is more convenient to attach them before fixing the antenna unit to the mounting location, do step 7 before fixing the antenna unit.

1. Prepare a post for the antenna as shown in the illustration below.

Recommended Flange

(Option)

Name: Flange

Type: OP20-31

Code No.: 004-378-230

Weld all the way around.

Post should be constructed from stainless steel and measure

4mm or larger in thickness. 3 mm or less

The width of welding should be within 3 mm from the mast so that the welding does not touch the spring washer.

f15

Gasket

 

(supplied in installation materials)

 

BOW

 

Bow direction is

 

between antennas

 

f60.5 mm #1 and #2.

Installation post

1-4

Image 14
Contents THD Satellite Compass 00014854600 Safety Instructions Table of Contents MAINTENANCE, Troubleshooting IiiWord to the Owner of the SC-110 FeaturesForeword System Configuration System configurationOptional equipment Equipment ListStandard supply Name Type Code No Qty RemarksSpecifications of THD Satellite Compass SC-110Coating Color Antenna unit InstallationMounting Considerations Antenna and field of view Mast diameter Separation distance minimumSeparation degrees Example of antenna installed below superstructures Display unit, processor unitInstalling the Antenna Unit Installation postFix the antenna unit to the post as shown below Fastening antenna unit to a postCoating bolt, nut and washer with silicone rubber Antenna elementBulkhead mount Installing the Processor UnitBulkhead mount Deck mount Processor unit orientation, deck mountingMounting on underside of desk Installation on the underside of a deskInstallation of processor unit on the underside of a desk Flush mount Installing the Display UnitDesktop, overhead mounting Flush mount FFlush mount S Flush mount SFlush mount S kit Type OP20-17, Code No Wiring WiringHow to install the optional antenna cable set Sectional view of coaxial cable DPYC-1.5How to attach connector N-P-8DFB How to attach connector N-P-8DFBSatellite tracking status display Initial SettingsConfirming satellite status Main menu Installation setup menuChoosing mounting method Processor unit, cover opened General wiringConnection of External Equipment Fabrication of cables Cable Sectional view, fabricationDisplay unit OperationControls Processor unit Turning the Power On/OffPanel Illumination, Display Contrast Heading display Choosing a DisplayDescription of displays Nav data displayROT Rate-of-Turn display Steering displayCompass display Speed display SOG/STW displayDgps alarm options Alarm SetupAlarm menu Buzzer optionsConfirming Satellite Status Satellite status displayGPS Setup menu description GPS SetupDisplaying the GPS setup menu Heading Disable SV Disable satelliteOutput Data Data OUT1 menu, sentences Baud rate optionsHeading talker options Tx interval optionsIEC, Nmea version options Output sentence limitation Sentence and maximum number of charactersLog pulse Log pulse optionsGeodetic data System SetupSystem Setup menu Time format Using local timeUnits of measurement Demonstration mode WAAS/DGPS menu WAAS/DGPS SetupPosition fix mode options Waas Search optionsAUTO/MANUAL options Provider GEO Satellite LongitudeGEO satellite and coverage area Operation HDG Restoration options Others MenuOthers menu Trip Menu Trip menuReset Distance prompt Resetting Distance RunChoosing External Heading Source for Backup Heading setup menuMAINTENANCE, Troubleshooting Preventive MaintenanceSymptom Cause Remedy TroubleshootingTroubleshooting Test menu options DiagnosticsDiagnostic test1 Test start promptDiagnostic test sequence Display Test Program Number DisplayDiagnostic test2 TEST2 displayTEST3 menu Diagnostic test3Alarm options Program version no. display Program NumberClearing Data Prompts for erasure of dataPrompt for exchanging battery Replacement of BatteryBattery Location Type Code No Prompt for turning off the powerError Message Meaning Remedy Replacement of FuseError Messages Message displayError messages con’t from previous Data ERRAP-1 AppendixMenu Tree Digital Interface Data Schematic diagramsAP-3 Data OutData sentences AP-4AP-5 GNS Gnns fix dataAP-6 VBW Dual ground/water speedAP-7 VLW Distance travelled through the waterAP-8 Port Terminal Name Signal Remarks LabelInput/Output Ports AP-9 HdthdghdmProcessor Unit, cover removed Parts List and Parts LocationAP-10 AP-11 Display Unit, cover openedGeodetic Chart Codes AP-12Principle of Satellite Compass AP-13What is WAAS? AP-14Packing List Page 工事材料表 SC-502-J/E 20AY-X-9404 SC-1101-J/E 20AY-X-9401 Spare Parts List for 20AT-X-9411 フラッシュマウントキット 20AY-X-9403 Hatai Page Page Page Page Display Unit Index IN-1
Related manuals
Manual 89 pages 1.46 Kb

SC-110 specifications

The Furuno SC-110 is a sophisticated marine navigation system designed for a wide array of maritime applications. This advanced device showcases Furuno’s commitment to quality and innovation, making it a popular choice among boat owners, commercial vessels, and maritime professionals.

At the heart of the SC-110 is its precise Positioning Differential GPS (DGPS) technology. This cutting-edge systems enhances the accuracy of standard GPS operations, enabling users to obtain real-time positioning with an impressive level of precision. The SC-110 offers positioning accuracy within one meter, vital for navigation safety and efficiency, particularly in congested or challenging maritime environments.

One of the standout features of the Furuno SC-110 is its built-in Automatic Identification System (AIS) capability. AIS technology allows the SC-110 to display real-time information about nearby vessels, including their position, course, and speed. This additional situational awareness helps mariners avoid potential collisions, making it an essential component for navigation in busy shipping lanes.

The device also incorporates a user-friendly interface, characterized by a sharp, high-resolution display that is easy to read in various lighting conditions. This ensures that maritime operators can access critical navigation data quickly and without confusion. Additionally, customizable settings allow users to tailor the system to their specific needs, improving overall usability.

Another significant aspect of the Furuno SC-110 is its robust integration capabilities. The system can seamlessly connect with other onboard electronic equipment, such as radar systems, chart plotters, and autopilots. This interoperability enhances operational efficiency, allowing mariners to control all their navigational tools from a singular platform.

The SC-110 is designed to withstand the rigors of the marine environment. Built with durable materials and an IP67 waterproof rating, it provides reliable performance even in harsh weather conditions. This resilience ensures that the system will serve maritime operators effectively over time without compromising functionality.

In summary, the Furuno SC-110 represents a blend of advanced technology and practical usability. Its high-precision DGPS, AIS integration, user-friendly interface, and robust construction make it an invaluable tool for safe and efficient maritime navigation. Whether for leisure boating or commercial operations, the SC-110 stands as a testament to Furuno’s expertise in the marine electronics field.