Desa VN2000BB, VGN30B installation manual Product Identification, Local Codes, Unpacking

Page 4

Ignitor Button

Control Knob

PRODUCT

IDENTIFICATION

 

 

Grill

 

 

Guard

 

 

Heat Shield

 

 

(VGN30B) or

 

 

Glass Panel

 

 

(VN2000BB)

 

Front

 

 

Panel

Heater

 

 

 

 

Cabinet

 

Figure 1 - Vent-Free Natural Gas Heater

 

LOCAL CODES

Install and use heater with care. Follow all local codes. In the absence of local

 

 

codes, use the latest edition of National Fuel Gas Code ANSI Z223.1, also known

 

as NFPA 54*.

 

 

*Available from:

 

 

American National Standards Institute, Inc.

 

 

1430 Broadway

 

 

New York, NY 10018

 

 

National Fire Protection Association, Inc.

 

 

Batterymarch Park

 

 

Quincy, MA 02269

 

UNPACKING

1. Remove heater from carton.

 

 

 

2.Remove all protective packaging applied to heater for shipment.

3.Check heater for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater.

PRODUCT

Safety Device

FEATURES

This heater has a pilot with an Oxygen Depletion Sensor Shutoff System (ODS).

The ODS/pilot is a required feature for vent-free heaters. The ODS/pilot shuts off

 

the heater if there is not enough fresh air.

Piezo Ignition System

This heater has a piezo ignitor. This system requires no matches, batteries, or other sources to light heater.

4

100099

Image 4
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents SafetySafety Information Product Identification Local CodesUnpacking ProductFresh AIR For CombustionVentilation Producing Adequate VentilationDetermining FRESH-AIR Flow for Heater Location Fresh AIRDetermining if You Have a Confined or Unconfined Space Ventilation AIR Fresh AIR for Combustion and VentilationVentilation Air From Inside Building Ventilation AIR Ventilation Air From OutdoorsInstalling To Wall Installation ItemsCheck GAS Type Locating HeaterCeiling Right16 3/ 4 VGN30B FloorInstalling Heater to Wall Mounting BracketRemoving Front Panel Of Heater Methods For Attaching Mounting Bracket To WallMarking Screw Locations Attaching Mounting Bracket To WallInstalling Bottom Mounting Screws Placing Heater On Mounting BracketConnecting to GAS Supply Pressure Testing GAS Supply Piping System Checking GASConnections Servicing. Correct all leaks at oncePressure Testing Heater GAS Connections CheckingOperating HeaterOperating Heater PilotInspecting BurnerPilot Flame Pattern Shutting Off HeaterInspecting Burner Burner Flame PatternCorrect Flame Pattern AT High Position Incorrect Flame Pattern AT High PositionCleaning MaintenanceTrouble Shooting ODS/PILOT and BurnerSee Cleaning TROUBLE- ShootingFrom Ing statement at TopService Hints Technical ServiceVGN30B Parts Under Warranty Replacement PartsParts Not Under Warranty Manual Shutoff AccessoriesFloor Mounting Stand ODS/Pilot VGN30B Parts List KEY Part Number Description QTY12-2 12-1 VN2000BB Warranty Information Limited Warranty Vanguard VENT-FREE Heaters