b |
| |
2 |
| |
PRESSURE REGULATOR INSTALLATION |
| |
STEP 1 |
| |
Mount the 1/2” NPT (conical) male connector to the pressure |
| |
regulator and tighten by using a wrench. | LOCK | |
Do not over tighten the connector. | ||
|
Over tightening may crack regulator.
Arrow
Fig. 2.2
STEP 2
Assemble the 1/2” NPT connector + pressure regulator group to the extension pipe interposing the gasket supplied. The regulator cover must be oriented toward the front side of the range.
IMPORTANT: use two spanners to tighten the connection.
Regulator cover
Fig. 2.3
10