Kidde SMOKE AND CARBON MONOXIDE ALARM Carbon Monoxide Alarm Features, Step

Carbon Monoxide Alarm Features

CAUTION: This alarm will only indicate the presence of carbon monoxide gas at the sensor. Carbon monoxide gas may be present in other areas.

Individuals with medical problems may consider using warning devices which provide audible and visual signals for carbon monoxide concentrations under 30 ppm.

Operating/Installation Instructions

Step 1

Installing Batteries:

Batteries were not installed at the factory and must be installed for the unit to operate! Install the three (3) AA batteries in the back of the Smoke/CO Alarm.

•The mounting plate must be removed from the back of the unit to install batteries. To remove, hold the mounting plate and twist counterclockwise (left).

•The battery polarity markings on the bottom of the battery compartment must be adhered to.

•Batteries must be installed in the sequence shown. If batteries seem difficult to install, they’re not being installed in the proper sequence.

Batteries Must Be Installed in Order Shown Below:

3.Install Last

2.Install Second

1.Install First

AA-battery3			INST ALL
			THIRD
	2		INST ALL
		SECOND
AA-battery
ARNING:WBATTERIESHAVEBEENAAREMOVED	1		INST ALL
			FIRST
	-battery

WARNING:	+	3
	+	2
BATTERIES
MISSING	+	1

10