Niles Audio ZR-8630AVZR-8630AV manual Master Key/Source Button Events

Page 35

OPERATIONAL OVERVIEW

Master Key/Source Button Events

When you press a Master Key on a Master Keypad Module or a Source Button on the hand-heldR-8 Remote, as many as four events occur.

The first two events are factory-programmed: Event 1 activates the zone in which you are located. Event 2 selects the proper source input corresponding to the Master Key or Source Button you press (1 = Tuner 1, 2 = Tuner 2, 3 = Input 3, 4 = Input 4, etc.).

Two installer-programmable events are available for Master Keys and Source Buttons 3 through 8: Event 3 is the Source ON Event, and Event 4 is the Sequence Event.

Because no power command is required for the internal tuners of the ZR-8630AV, Master Keys 1 and 2 and the Tuner Source Buttons are programmable only with the Sequence Event.

Master Key/

Event 1

Event 2

Event 3

Event 4

Source Button

(Zone ON)

(Input)

(Source ON)

(Sequence)

 

 

 

 

 

Master Key 1 or

Turns Zone On

Selects Tuner 1

Not Available

Installer Programmed

Tuner 1 Source Button

(Factory Programmed)

(Factory Programmed)

 

 

 

 

 

 

 

Master Key 2 or

Turns Zone On

Selects Tuner 2

Not Available

Installer Programmed

Tuner 2 Source Button

(Factory Programmed)

(Factory Programmed)

 

 

 

 

 

 

 

Master Key 3 or

Turns Zone On

Selects Input 3

Installer Programmed

Installer Programmed

Source Button 3

(Factory Programmed)

(Factory Programmed)

 

 

 

 

 

Master Key 4 or

Turns Zone On

Selects Input 4

Installer Programmed

Installer Programmed

Source Button 4

(Factory Programmed)

(Factory Programmed)

 

 

 

 

 

Master Key 5 or

Turns Zone On

Selects Input 5

Installer Programmed

Installer Programmed

Source Button 5

(Factory Programmed)

(Factory

Programmed

 

 

 

 

 

 

 

 

 

 

 

Master Key 6 or

Turns Zone On

Selects Input 6

Installer Programmed

Installer Programmed

Source Button 6

(Factory Programmed)

(Factory Programmed)

 

 

 

 

 

Master Key 7 or

Turns Zone On

Selects Input 7

Installer Programmed

Installer Programmed

Source Button 7

(Factory Programmed)

(Factory Programmed)

 

 

 

 

 

Master Key 8 or

Turns Zone On

Selects Input 8

Installer Programmed

Installer Programmed

Source Button 8

(Factory Programmed)

(Factory Programmed)

 

 

 

 

 

Event 1

Pressing a Master Key or a Source Button turns a ZONE ON. Pressing and holding a Master Key/Source Button turns all zones on to that source. (The zone must be enabled with a DIP switch. See Installation Settings for more details.) When a zone is on, the selected Master Key illuminates green.

Event 2

Pressing or pressing and holding a Master Key/Source Button selects the proper input programmed for that Master Key/Source Button. The internal tuner 1 is the source for Master Key 1 on the Master Keypad Modules and the Tuner 1 Source Button on the R-8 Remote. The internal tuner 2 is the source for Master Key 2 on the Master Keypad Modules and the Tuner 2 Source Button on the R-8 Remote. Master Keys/Source Buttons 3 through 8 are for the corresponding external audio inputs.

Event 3

Pressing a Master Key/Source Button turns ON IR- activated source components (i.e., DSS, VCR). The Source ON event occurs only for Master Keys/Source Buttons 3 through 8. Power commands for each Master Key/Source

Button are programmed individually and occur condition- ally, synchronized by the corresponding sync inputs.

Event 4

This event is executed last. The sequence typically includes play, group, file, or channel commands for an associated source component. You can program the sequence for Master Keys/Source Buttons 3 through 8 with the IR com- mands taught to their respective function keys, and with pro- grammed time delays. You can program the sequences for the Tuner Source Keys with the tuners’ direct access or pre- set access commands. (Source-in-Use Indication affects this event. See page 45.)

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents ZR-8630AV Congratulations Table of ContentsChoosing a Synchronization Method Table of Contents Programming a Home Theater Remote Control to Operate Introduction Elegant and Intuitive User Interfaces Features and BenefitsMulti-Zone/Multi-Source Central IntelligenceExpandable for Larger Multi-Zone Systems System-Wide OperationPaging Input for Telephone Systems 12V Control OutputParts Guide ZR-8630AV LED Zone ON/OFF IndicatorLED Zone ON/OFF Indicators Zone Mute Button Parts Guide R-8 Remote IncludedSource Buttons Zone OFF ButtonZone Mute Key Volume KeysMaster Keys Zone OFF KeyConfiguration 1 SIX Zones System ConfigurationsSource Components Introduction to ZR-8630AV ConfigurationsKeypads, IR Sensors, and Remote Controls Speakers Source-Component AutomationFlasher Outputs Video OutputsSharing Source Components with Two ZR-8630AV Units Configuration 2 Adding Zones Using Multiple ZR-8630AV UnitsCD Changer Home Theater Receiver Shared Source-Component Control Configuration 4 Integrating AN IR-CONTROLLED Home TheaterDistributing Audio and Video Signals IntelliControl MSU Configuration 6 Multiple Master Keypad Modules in a Zone Configuration 7 Multiple Listening Areas in a Zone Configuration 8 External Amplifier in a Zone for More Power Niles SI-245 Niles SI-245 Configuration 11 System Paging and External Telephone System Zone 6 Master Bedroom Component Compatibility Infrared Command CompatibilityTesting for a Possible IR Command Conflict Solving the IR Command Conflict if PresentSource Components with Latching Power Source Power SynchronizationWhat is SOURCE-POWER SYNCHRONIZATION? Source Components with Separate ON/OFF IR CommandsVideo Sync SOURCE-POWER SynchronizationChoosing a Synchronization Method Obtaining Voltage Sync Voltage SyncSource and Home Theater Sync Status Light SensingSource Components that Do Not Require Synchronization Source Components that Require Power SynchronizationLED Sync Status If Home Theater has syncMaster KEYS/SOURCE Buttons Operational OverviewEvent Master Key/Source Button EventsSource Button EventOFF KEY/BUTTON Master KEY/SOURCE Button OperationSingle-Zone Operation System-Wide OFF OFF Key EventsOFF KEY/BUTTON Operation Single-Zone OFFVolume Keys/Buttons Operation Volume KEYS/BUTTONSMute Key/Button Operation Mute KEY/BUTTONFunction Keys on the Solo M Function KEYS/BUTTONSFunction Key/Button Operation for the Built-in Tuners Pre-Programmed Tuner CommandsTuner Select Button Preset ButtonsFRONT-PANEL Tuner Operation Tuner DisplayOperating a System with Multiple ZR-8630AV Units Identical Source ComponentsShared Source Components Operation from the Home Theater Zone Operating a System Integrated with a Home TheaterOperation from the Stereo Zones Provided by the ZR-8630AV Paging Indication SYSTEM-BUSY IndicationSOURCE-IN-USE Indication Connections InstallationPlacement Connecting Speaker Wire to the Niles NO-STRIP ConnectorTerminating FOUR-PAIR Twisted Cable Connecting Accessory KeypadsTwisted Cable Connecting IR SensorsConnecting a Sensor using Four-Pair Telephone Paging SOURCE-COMPONENT Home Theater ZR-8630AV Distributed Equipment Location Connecting AN IR Sensor for Local System ControlZR-8630AV Distributed Equipment Location Programming Software Programming Documentation Installer Programming PanelProgramming Overview ZR-8630AV Programming Worksheet Mr. SmithModel Component Sync Power ProgrammingMaster KEY Label Component BrandSequence Programming Function Keys/Buttons ProgrammingOff button to turn off the zones Programming a Learning Remote for Zone OperationProgramming Overview Programming Overview AMP Step Tuner CommandStep ZoneProgramming Worksheet Programming Worksheet Programming Worksheet Master KEY Label Single Power IR Command Two Separate on and OFF IR CommandsLatching Power Source IR CommandSource Component Source Component Source Component Programming MASTER/SLAVE Mode Installation SettingsALL ON/PAGE DIP Switch Settings FIXED/VARIABLE Preamplifier SwitchVolume Level Volume SettingsMaximum Turn on and Source Change Volume Level ALL on Volume LevelVideo Sync Selection SOURCE-IN-USE SettingSystem Programming Steps Programming IR CommandsIR Commands LED blinks RED Discrete OFF LED Enter IR Discrete OFF Discrete on Alternate IR Learning Mode Program Editing Steps SOURCE-POWER EditingIR Command Editing Sequence LED blinks Sequence EditingErasing Individual Sequences Storing Tuner PresetsErasing Individual IR Commands Program ErasingSelect Eight Master Keys ZR-8630AV System AccessoriesSync Accessories ZR-8630AV System AccessoriesSystem Installation Troubleshooting TroubleshootingTroubleshooting the ZR-8630AV General SpecificationsTuner Section AM USA/CANADAPage Page Niles Audio Corporation

ZR-8630AVZR-8630AV specifications

The Niles Audio ZR-8630AV is a sophisticated multi-room audio distribution system designed to deliver high-quality sound throughout your home. Ideal for both residential and light commercial applications, this system enables seamless integration of audio sources, providing a versatile solution for music lovers and entertainment enthusiasts alike.

One of the standout features of the ZR-8630AV is its ability to support eight zones, each of which can independently control audio playback. This flexibility allows users to customize their listening experience in various rooms, ensuring that everyone can enjoy their preferred music at their desired volume. The system can drive up to 30 watts of power per channel, making it suitable for a wide range of speakers, from low-impedance models to high-efficiency types.

The ZR-8630AV is equipped with advanced technology that enhances its performance. One of the key technologies is the proprietary Niles Intelli-Volume technology, which automatically adjusts volume levels based on the audio source and conditions. This feature ensures consistent sound quality across different zones, providing an optimal listening experience.

This audio distribution system also features a user-friendly, intuitive interface that simplifies operation. The built-in IR receiver allows for remote control from various devices, while the easy-to-navigate menu makes it simple to select sources and adjust settings. Additionally, the ZR-8630AV is compatible with third-party control systems, enhancing its integration capabilities in home automation setups.

Another notable characteristic is the ZR-8630AV's ability to connect multiple audio sources, including CD players, satellite receivers, and streaming services. This connectivity ensures users have endless options for their listening pleasure. It prominently features composite and optical digital inputs, making it versatile regarding the types of sources it can accommodate.

Moreover, the ZR-8630AV incorporates high-quality digital-to-analog converters, ensuring that sound reproduction remains pristine and true to the original recording. This focus on audio fidelity makes it a popular choice for audiophiles who refuse to compromise on sound quality.

In summary, the Niles Audio ZR-8630AV is a powerful multi-room audio distribution system that combines exceptional sound quality, advanced features, and seamless connectivity. Its ability to serve multiple zones in a unified manner, coupled with user-friendly controls and compatibility with various audio sources, positions it as a leading choice for anyone looking to create the perfect audio environment in their home.
Top Page Image Contents