Niles Audio ZR-8630AVZR-8630AV manual SYSTEM-BUSY Indication, SOURCE-IN-USE Indication

Page 45

OPERATIONAL OVERVIEW

The moment a valid Home Theater Sync signal is present at the ZR-8630AV, the ZR-8630AV unit’s 12V control output sends a turn-on trigger for a voltage-triggered AC power strip (i.e., Niles AC-3), activating latching source components.

When the Home Theater is turned OFF, the ZR-8630AV checks itself and any other ZR-8630AV units in the system to see if any zones are still ON. If all zones are OFF, the 12V control output shuts OFF, turn- ing OFF the latching source components, and issues power OFF IR commands for turning OFF the IR- controlled shared source components.

Method 3. Integrated Home Theater without 12V Home Theater Sync and using Niles R-8 Commands The Home Theater IR Remote (programmed with the Niles R-8 IR commands) sends IR commands to the ZR-8630AV through the IR Input on the rear panel. This gives control of the shared source components to users in the Home Theater.

All the actual IR commands for shared source components are programmed into the ZR-8630AV. When it receives a Niles IR command, the ZR-8630AV sends the corresponding programmed source IR com- mands to the Flasher Output dedicated to the shared source component that is selected (i.e., Source 3 = Flasher 3, Source 4 = Flasher 4, etc.). This method operates identical source components individually.

Important Note: Shared source components that are unique in the system may have their actual IR com- mands programmed into the Home Theater remote and issued for simple IR repeating using this method.

When the Home Theater is turned OFF, the Home Theater Remote sends a Niles OFF command to the ZR-8630AV.The ZR-8630AV then checks all zones for all ZR-8630AV units in the system. If all zones are OFF, the 12V Control Output shuts OFF, turning OFF the latching source components. Also, if the Source Sync status of the shared source components requires a power OFF IR command, the ZR- 8630AV issues one.

SYSTEM-BUSY INDICATION

The ZR-8630AV has a built-in system-busy indication mode that is displayed on the Master Key LEDs of the Select™ and Solo™ Master Keypad Modules. If the ZR-8630AV receives simultaneous commands from two dif- ferent users, each located in a separate zone, the Master Key LED for the user who does not get the expected response will blink quickly RED three times, alerting that user to reissue the command.

Important Note: The system also indicates that it is busy while it executes IR commands and delays in a Master Key sequence.

SOURCE-IN-USE INDICATION

The ZR-8630AV has a built-in source-in-use indication mode that is displayed on the Master Key LEDs of the Select™ IR and Solo™ IR Master Keypad Modules. When a source being used in one zone is selected by a user in another zone, the system:

•Will select the source.

•Will not execute the Master Key Sequence.

•Will alert the second user that the source already is in use. The Master Key LED for that source will blink quickly YELLOW five times before lighting GREEN.

Any subsequent press will operate the system normally.

Important Note: Select™ and Solo™ Master Keypad Modules without IR do not support the source-in-use indi- cation. If you have any of these keypads in your system, we recommend that you turn this feature OFF. Master and Slave ZR-8630AV units in a system all must have the same source-in-use setting. For details, see page 62.

PAGING INDICATION

The ZR-8630AV has a built-in paging-indication mode that is displayed on a Master Key LED of the Select™ and Solo™ Master Keypad Modules. If the ZR-8630AV sends a page to a zone, the Master Key LED in that zone will blink slowly GREEN. When the page ends, the Master Key LED resumes its last state (ON or OFF).

Important Note: Paging takes priority over all system functions until the page ends.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents ZR-8630AV Congratulations Table of ContentsChoosing a Synchronization Method Table of Contents Programming a Home Theater Remote Control to Operate Introduction Multi-Zone/Multi-Source Features and BenefitsCentral Intelligence Elegant and Intuitive User InterfacesPaging Input for Telephone Systems System-Wide Operation12V Control Output Expandable for Larger Multi-Zone SystemsParts Guide ZR-8630AV LED Zone ON/OFF IndicatorLED Zone ON/OFF Indicators Source Buttons Parts Guide R-8 Remote IncludedZone OFF Button Zone Mute ButtonMaster Keys Volume KeysZone OFF Key Zone Mute KeyConfiguration 1 SIX Zones System ConfigurationsIntroduction to ZR-8630AV Configurations Keypads, IR Sensors, and Remote ControlsSource Components Flasher Outputs Source-Component AutomationVideo Outputs SpeakersSharing Source Components with Two ZR-8630AV Units Configuration 2 Adding Zones Using Multiple ZR-8630AV UnitsCD Changer Home Theater Receiver Configuration 4 Integrating AN IR-CONTROLLED Home Theater Distributing Audio and Video SignalsShared Source-Component Control IntelliControl MSU Configuration 6 Multiple Master Keypad Modules in a Zone Configuration 7 Multiple Listening Areas in a Zone Configuration 8 External Amplifier in a Zone for More Power Niles SI-245 Niles SI-245 Configuration 11 System Paging and External Telephone System Zone 6 Master Bedroom Testing for a Possible IR Command Conflict Infrared Command CompatibilitySolving the IR Command Conflict if Present Component CompatibilityWhat is SOURCE-POWER SYNCHRONIZATION? Source Power SynchronizationSource Components with Separate ON/OFF IR Commands Source Components with Latching PowerSOURCE-POWER Synchronization Choosing a Synchronization MethodVideo Sync Obtaining Voltage Sync Voltage SyncSource and Home Theater Sync Status Light SensingLED Sync Status Source Components that Require Power SynchronizationIf Home Theater has sync Source Components that Do Not Require SynchronizationMaster KEYS/SOURCE Buttons Operational OverviewSource Button Master Key/Source Button EventsEvent EventMaster KEY/SOURCE Button Operation Single-Zone OperationOFF KEY/BUTTON OFF KEY/BUTTON Operation OFF Key EventsSingle-Zone OFF System-Wide OFFVolume Keys/Buttons Operation Volume KEYS/BUTTONSMute Key/Button Operation Mute KEY/BUTTONFunction Keys on the Solo M Function KEYS/BUTTONSFunction Key/Button Operation for the Built-in Tuners Pre-Programmed Tuner CommandsFRONT-PANEL Tuner Operation Preset ButtonsTuner Display Tuner Select ButtonIdentical Source Components Shared Source ComponentsOperating a System with Multiple ZR-8630AV Units Operating a System Integrated with a Home Theater Operation from the Stereo Zones Provided by the ZR-8630AVOperation from the Home Theater Zone SYSTEM-BUSY Indication SOURCE-IN-USE IndicationPaging Indication Placement InstallationConnecting Speaker Wire to the Niles NO-STRIP Connector ConnectionsTerminating FOUR-PAIR Twisted Cable Connecting Accessory KeypadsConnecting IR Sensors Connecting a Sensor using Four-PairTwisted Cable Telephone Paging SOURCE-COMPONENT Home Theater ZR-8630AV Distributed Equipment Location Connecting AN IR Sensor for Local System ControlZR-8630AV Distributed Equipment Location Installer Programming Panel Programming OverviewProgramming Software Programming Documentation ZR-8630AV Programming Worksheet Mr. SmithMaster KEY Label Component Sync Power ProgrammingComponent Brand ModelSequence Programming Function Keys/Buttons ProgrammingOff button to turn off the zones Programming a Learning Remote for Zone OperationProgramming Overview Programming Overview Step Step Tuner CommandZone AMPProgramming Worksheet Programming Worksheet Programming Worksheet Latching Power Single Power IR Command Two Separate on and OFF IR CommandsSource IR Command Master KEY LabelSource Component Source Component Source Component ALL ON/PAGE DIP Switch Settings Installation SettingsFIXED/VARIABLE Preamplifier Switch Programming MASTER/SLAVE ModeMaximum Turn on and Source Change Volume Level Volume SettingsALL on Volume Level Volume LevelVideo Sync Selection SOURCE-IN-USE SettingSystem Programming Steps Programming IR CommandsIR Commands LED blinks RED Discrete OFF LED Enter IR Discrete OFF Discrete on Alternate IR Learning Mode SOURCE-POWER Editing IR Command EditingProgram Editing Steps Sequence LED blinks Sequence EditingErasing Individual IR Commands Storing Tuner PresetsProgram Erasing Erasing Individual SequencesSelect Eight Master Keys ZR-8630AV System AccessoriesSync Accessories ZR-8630AV System AccessoriesTroubleshooting Troubleshooting the ZR-8630AVSystem Installation Troubleshooting Tuner Section SpecificationsAM USA/CANADA GeneralPage Page Niles Audio Corporation

ZR-8630AVZR-8630AV specifications

The Niles Audio ZR-8630AV is a sophisticated multi-room audio distribution system designed to deliver high-quality sound throughout your home. Ideal for both residential and light commercial applications, this system enables seamless integration of audio sources, providing a versatile solution for music lovers and entertainment enthusiasts alike.

One of the standout features of the ZR-8630AV is its ability to support eight zones, each of which can independently control audio playback. This flexibility allows users to customize their listening experience in various rooms, ensuring that everyone can enjoy their preferred music at their desired volume. The system can drive up to 30 watts of power per channel, making it suitable for a wide range of speakers, from low-impedance models to high-efficiency types.

The ZR-8630AV is equipped with advanced technology that enhances its performance. One of the key technologies is the proprietary Niles Intelli-Volume technology, which automatically adjusts volume levels based on the audio source and conditions. This feature ensures consistent sound quality across different zones, providing an optimal listening experience.

This audio distribution system also features a user-friendly, intuitive interface that simplifies operation. The built-in IR receiver allows for remote control from various devices, while the easy-to-navigate menu makes it simple to select sources and adjust settings. Additionally, the ZR-8630AV is compatible with third-party control systems, enhancing its integration capabilities in home automation setups.

Another notable characteristic is the ZR-8630AV's ability to connect multiple audio sources, including CD players, satellite receivers, and streaming services. This connectivity ensures users have endless options for their listening pleasure. It prominently features composite and optical digital inputs, making it versatile regarding the types of sources it can accommodate.

Moreover, the ZR-8630AV incorporates high-quality digital-to-analog converters, ensuring that sound reproduction remains pristine and true to the original recording. This focus on audio fidelity makes it a popular choice for audiophiles who refuse to compromise on sound quality.

In summary, the Niles Audio ZR-8630AV is a powerful multi-room audio distribution system that combines exceptional sound quality, advanced features, and seamless connectivity. Its ability to serve multiple zones in a unified manner, coupled with user-friendly controls and compatibility with various audio sources, positions it as a leading choice for anyone looking to create the perfect audio environment in their home.
Top Page Image Contents