Niles Audio ZR-8630AVZR-8630AV Volume Settings, Maximum Turn on and Source Change Volume Level

Page 69

INSTALLATION SETTINGS

VOLUME SETTINGS

The ZR-8630AV has three useful volume features with customizable settings:

Maximum Turn ON and Source Change Volume Level

Maximum Turn ON and Source Change Volume prevents a zone from playing too loudly when it turns on or if its selected source changes.

When a zone turns ON individually, it always turns ON to its last volume setting—unless the last volume setting is greater than the Maximum Turn ON and Source Change Volume level set in the memory of the ZR-8630AV. In that case, it turns ON to the Maximum Turn ON and Source Change Volume level.

When a zone selects a new source, the volume setting does not change—unless the zone’s current volume set- ting is greater than the Maximum Turn ON and Source Change Volume level. In that case, it changes to the Maximum Turn ON and Source Change Volume level.

The range for Maximum Turn ON and Source Change Volume is 30 through 63. The factory default is 45. To adjust it up or down, see Changing Volume Settings below.

ALL ON Volume Level

In response to a system-wide ON command, zones that are OFF turn ON to the ALL ON Volume Level set in the memory of the ZR-8630AV. Volume levels in zones that already are ON don’t change during a system- wide ON command. The range for ALL ON Volume Level is 1 through 63. The factory default is 22. To adjust it up or down, see Changing Volume Settings below.

Page Volume Level

When a page occurs, all zones broadcast it at the Page Volume Level set in the memory of the ZR-8630AV. The range for PAGE Volume Level is 1 through 63. The factory default is 35. To adjust it up or down, see Changing Volume Settings below.

Changing Volume Settings

1.Turn the ZR-8630AV ON.

2.Press and hold the PROGRAM button for two seconds, until the LCD display shows "PGM MODE.”

3.Press the Tuner Select button.

The LCD display shows "MxVol #" (for Maximum Turn ON and Source Change Volume Level).

4.Press the Station Scan + button to increase MxVol or press the Station Scan - button to decrease MxVol.

5.Press the Tuner Select button or NEXT button to advance to “OnVol #” (for ALL ON Volume Level) and repeat Step 4 to adjust.

6.Press the Tuner Select button or NEXT button to advance to “PgVol #” (for Page Volume Level) and repeat Step 4 to adjust.

7.Tap the PROGRAM button to exit programming.

61

Page 68 Page 70
Image 69
Page 68 Page 70
Contents ZR-8630AV Congratulations Table of ContentsChoosing a Synchronization Method Table of Contents Programming a Home Theater Remote Control to Operate Introduction Multi-Zone/Multi-Source Features and BenefitsCentral Intelligence Elegant and Intuitive User InterfacesPaging Input for Telephone Systems System-Wide Operation12V Control Output Expandable for Larger Multi-Zone SystemsParts Guide ZR-8630AV LED Zone ON/OFF IndicatorLED Zone ON/OFF Indicators Source Buttons Parts Guide R-8 Remote IncludedZone OFF Button Zone Mute ButtonMaster Keys Volume KeysZone OFF Key Zone Mute KeyConfiguration 1 SIX Zones System ConfigurationsIntroduction to ZR-8630AV Configurations Keypads, IR Sensors, and Remote ControlsSource Components Flasher Outputs Source-Component AutomationVideo Outputs SpeakersSharing Source Components with Two ZR-8630AV Units Configuration 2 Adding Zones Using Multiple ZR-8630AV UnitsCD Changer Home Theater Receiver Configuration 4 Integrating AN IR-CONTROLLED Home Theater Distributing Audio and Video SignalsShared Source-Component Control IntelliControl MSU Configuration 6 Multiple Master Keypad Modules in a Zone Configuration 7 Multiple Listening Areas in a Zone Configuration 8 External Amplifier in a Zone for More Power Niles SI-245 Niles SI-245 Configuration 11 System Paging and External Telephone System Zone 6 Master Bedroom Testing for a Possible IR Command Conflict Infrared Command CompatibilitySolving the IR Command Conflict if Present Component CompatibilityWhat is SOURCE-POWER SYNCHRONIZATION? Source Power SynchronizationSource Components with Separate ON/OFF IR Commands Source Components with Latching PowerSOURCE-POWER Synchronization Choosing a Synchronization MethodVideo Sync Obtaining Voltage Sync Voltage SyncSource and Home Theater Sync Status Light SensingLED Sync Status Source Components that Require Power SynchronizationIf Home Theater has sync Source Components that Do Not Require SynchronizationMaster KEYS/SOURCE Buttons Operational OverviewSource Button Master Key/Source Button EventsEvent EventMaster KEY/SOURCE Button Operation Single-Zone OperationOFF KEY/BUTTON OFF KEY/BUTTON Operation OFF Key EventsSingle-Zone OFF System-Wide OFFVolume Keys/Buttons Operation Volume KEYS/BUTTONSMute Key/Button Operation Mute KEY/BUTTONFunction Keys on the Solo M Function KEYS/BUTTONSFunction Key/Button Operation for the Built-in Tuners Pre-Programmed Tuner CommandsFRONT-PANEL Tuner Operation Preset ButtonsTuner Display Tuner Select ButtonIdentical Source Components Shared Source ComponentsOperating a System with Multiple ZR-8630AV Units Operating a System Integrated with a Home Theater Operation from the Stereo Zones Provided by the ZR-8630AVOperation from the Home Theater Zone SYSTEM-BUSY Indication SOURCE-IN-USE IndicationPaging Indication Placement InstallationConnecting Speaker Wire to the Niles NO-STRIP Connector ConnectionsTerminating FOUR-PAIR Twisted Cable Connecting Accessory KeypadsConnecting IR Sensors Connecting a Sensor using Four-PairTwisted Cable Telephone Paging SOURCE-COMPONENT Home Theater ZR-8630AV Distributed Equipment Location Connecting AN IR Sensor for Local System ControlZR-8630AV Distributed Equipment Location Installer Programming Panel Programming OverviewProgramming Software Programming Documentation ZR-8630AV Programming Worksheet Mr. SmithMaster KEY Label Component Sync Power ProgrammingComponent Brand ModelSequence Programming Function Keys/Buttons ProgrammingOff button to turn off the zones Programming a Learning Remote for Zone OperationProgramming Overview Programming Overview Step Step Tuner CommandZone AMPProgramming Worksheet Programming Worksheet Programming Worksheet Latching Power Single Power IR Command Two Separate on and OFF IR CommandsSource IR Command Master KEY LabelSource Component Source Component Source Component ALL ON/PAGE DIP Switch Settings Installation SettingsFIXED/VARIABLE Preamplifier Switch Programming MASTER/SLAVE ModeMaximum Turn on and Source Change Volume Level Volume SettingsALL on Volume Level Volume LevelVideo Sync Selection SOURCE-IN-USE SettingSystem Programming Steps Programming IR CommandsIR Commands LED blinks RED Discrete OFF LED Enter IR Discrete OFF Discrete on Alternate IR Learning Mode SOURCE-POWER Editing IR Command EditingProgram Editing Steps Sequence LED blinks Sequence EditingErasing Individual IR Commands Storing Tuner PresetsProgram Erasing Erasing Individual SequencesSelect Eight Master Keys ZR-8630AV System AccessoriesSync Accessories ZR-8630AV System AccessoriesTroubleshooting Troubleshooting the ZR-8630AVSystem Installation Troubleshooting Tuner Section SpecificationsAM USA/CANADA GeneralPage Page Niles Audio Corporation

ZR-8630AVZR-8630AV specifications

The Niles Audio ZR-8630AV is a sophisticated multi-room audio distribution system designed to deliver high-quality sound throughout your home. Ideal for both residential and light commercial applications, this system enables seamless integration of audio sources, providing a versatile solution for music lovers and entertainment enthusiasts alike.

One of the standout features of the ZR-8630AV is its ability to support eight zones, each of which can independently control audio playback. This flexibility allows users to customize their listening experience in various rooms, ensuring that everyone can enjoy their preferred music at their desired volume. The system can drive up to 30 watts of power per channel, making it suitable for a wide range of speakers, from low-impedance models to high-efficiency types.

The ZR-8630AV is equipped with advanced technology that enhances its performance. One of the key technologies is the proprietary Niles Intelli-Volume technology, which automatically adjusts volume levels based on the audio source and conditions. This feature ensures consistent sound quality across different zones, providing an optimal listening experience.

This audio distribution system also features a user-friendly, intuitive interface that simplifies operation. The built-in IR receiver allows for remote control from various devices, while the easy-to-navigate menu makes it simple to select sources and adjust settings. Additionally, the ZR-8630AV is compatible with third-party control systems, enhancing its integration capabilities in home automation setups.

Another notable characteristic is the ZR-8630AV's ability to connect multiple audio sources, including CD players, satellite receivers, and streaming services. This connectivity ensures users have endless options for their listening pleasure. It prominently features composite and optical digital inputs, making it versatile regarding the types of sources it can accommodate.

Moreover, the ZR-8630AV incorporates high-quality digital-to-analog converters, ensuring that sound reproduction remains pristine and true to the original recording. This focus on audio fidelity makes it a popular choice for audiophiles who refuse to compromise on sound quality.

In summary, the Niles Audio ZR-8630AV is a powerful multi-room audio distribution system that combines exceptional sound quality, advanced features, and seamless connectivity. Its ability to serve multiple zones in a unified manner, coupled with user-friendly controls and compatibility with various audio sources, positions it as a leading choice for anyone looking to create the perfect audio environment in their home.
Top Page Image Contents