Niles Audio ZR-8630AVZR-8630AV manual Discrete OFF LED

Page 73
SEQUENCE
TEST IR
Press the Test IR button.

SYSTEM PROGRAMMING STEPS

Step 5a - For a component connected as Source 3 that has IR commands for turning power ON and OFF:

Determine whether the component has a single power IR command for ON and OFF, or separate commands for dis- crete ON and discrete OFF. With the source component’s remote control, teach either the single power command or the discrete ON command.

The ENTER IR light blinks.

ENTER

IRPROGRAM

Immediately after capturing the IR command, test it by pressing the Test IR button. If the source component does not respond correctly to the IR command, try reteaching the com- mand at various distances from a half-inch (roughly a centimeter and a quarter) to three feet (almost a meter). If it still doesn’t work, see Alternate IR Learning Mode on page 68.

Press the TEST IR button.

TEST IR

ERASE

SEQUENCE

RED LED GREEN LED

Press the NEXT button.

ENTER

PROGRAM

NEXT

1

TUNER 2

 

 

 

 

 

POWER OR

IR

3 SOURCE 4

 

 

 

 

5

SOURCE 6

POWER

DISCRETE "ON"

 

 

 

IR COMMANDS

 

 

 

7

SOURCE 8

 

DISCRETE "OFF"

ENTER

PROGRAM

NEXT

IR

 

 

The DISCRETE OFF LED

The POWER OR DISCRETE

blinks RED.

“ON” LED turns OFF.

Step 5b - If you taught a single power command, press the NEXT button once and skip to STEP 7.

RED LED GREEN LED

Press the NEXT button.

ENTER

PROGRAM

NEXT

1

TUNER 2

 

 

 

 

 

POWER OR

IR

3 SOURCE 4

 

 

 

 

5

SOURCE 6

POWER

DISCRETE "ON"

 

 

 

IR COMMANDS

 

 

 

7

SOURCE 8

 

DISCRETE "OFF"

ENTER

PROGRAM

NEXT

IR

 

 

The DISCRETE “OFF”

The IR Commands

LED turns OFF.

LED blinks RED.

Step 5c - If you taught a discrete ON command, now teach the discrete OFF command. The ENTER IR light blinks.

 

 

Immediately after capturing the IR command,

 

 

test it by pressing the TEST IR button. If the

ENTER

PROGRAM

source component does not respond correctly

IR

to the IR command, try reteaching the com-

 

 

 

 

mand at various distances from a half-inch

 

 

(roughly a centimeter and a quarter) to three feet

 

 

(almost a meter). If it still doesn’t work, see

 

 

Alternate IR Learning Mode on page 68.

ERASE

65

Page 72 Page 74
Image 73
Page 72 Page 74
Contents ZR-8630AV Congratulations Table of ContentsChoosing a Synchronization Method Table of Contents Programming a Home Theater Remote Control to Operate Introduction Multi-Zone/Multi-Source Features and BenefitsCentral Intelligence Elegant and Intuitive User InterfacesPaging Input for Telephone Systems System-Wide Operation12V Control Output Expandable for Larger Multi-Zone SystemsParts Guide ZR-8630AV LED Zone ON/OFF IndicatorLED Zone ON/OFF Indicators Source Buttons Parts Guide R-8 Remote IncludedZone OFF Button Zone Mute ButtonMaster Keys Volume KeysZone OFF Key Zone Mute KeyConfiguration 1 SIX Zones System ConfigurationsKeypads, IR Sensors, and Remote Controls Introduction to ZR-8630AV ConfigurationsSource Components Flasher Outputs Source-Component AutomationVideo Outputs SpeakersSharing Source Components with Two ZR-8630AV Units Configuration 2 Adding Zones Using Multiple ZR-8630AV UnitsCD Changer Home Theater Receiver Distributing Audio and Video Signals Configuration 4 Integrating AN IR-CONTROLLED Home TheaterShared Source-Component Control IntelliControl MSU Configuration 6 Multiple Master Keypad Modules in a Zone Configuration 7 Multiple Listening Areas in a Zone Configuration 8 External Amplifier in a Zone for More Power Niles SI-245 Niles SI-245 Configuration 11 System Paging and External Telephone System Zone 6 Master Bedroom Testing for a Possible IR Command Conflict Infrared Command CompatibilitySolving the IR Command Conflict if Present Component CompatibilityWhat is SOURCE-POWER SYNCHRONIZATION? Source Power SynchronizationSource Components with Separate ON/OFF IR Commands Source Components with Latching PowerChoosing a Synchronization Method SOURCE-POWER SynchronizationVideo Sync Obtaining Voltage Sync Voltage SyncSource and Home Theater Sync Status Light SensingLED Sync Status Source Components that Require Power SynchronizationIf Home Theater has sync Source Components that Do Not Require SynchronizationMaster KEYS/SOURCE Buttons Operational OverviewSource Button Master Key/Source Button EventsEvent EventSingle-Zone Operation Master KEY/SOURCE Button OperationOFF KEY/BUTTON OFF KEY/BUTTON Operation OFF Key EventsSingle-Zone OFF System-Wide OFFVolume Keys/Buttons Operation Volume KEYS/BUTTONSMute Key/Button Operation Mute KEY/BUTTONFunction Keys on the Solo M Function KEYS/BUTTONSFunction Key/Button Operation for the Built-in Tuners Pre-Programmed Tuner CommandsFRONT-PANEL Tuner Operation Preset ButtonsTuner Display Tuner Select ButtonShared Source Components Identical Source ComponentsOperating a System with Multiple ZR-8630AV Units Operation from the Stereo Zones Provided by the ZR-8630AV Operating a System Integrated with a Home TheaterOperation from the Home Theater Zone SOURCE-IN-USE Indication SYSTEM-BUSY IndicationPaging Indication Placement InstallationConnecting Speaker Wire to the Niles NO-STRIP Connector ConnectionsTerminating FOUR-PAIR Twisted Cable Connecting Accessory KeypadsConnecting a Sensor using Four-Pair Connecting IR SensorsTwisted Cable Telephone Paging SOURCE-COMPONENT Home Theater ZR-8630AV Distributed Equipment Location Connecting AN IR Sensor for Local System ControlZR-8630AV Distributed Equipment Location Programming Overview Installer Programming PanelProgramming Software Programming Documentation ZR-8630AV Programming Worksheet Mr. SmithMaster KEY Label Component Sync Power ProgrammingComponent Brand ModelSequence Programming Function Keys/Buttons ProgrammingOff button to turn off the zones Programming a Learning Remote for Zone OperationProgramming Overview Programming Overview Step Step Tuner CommandZone AMPProgramming Worksheet Programming Worksheet Programming Worksheet Latching Power Single Power IR Command Two Separate on and OFF IR CommandsSource IR Command Master KEY LabelSource Component Source Component Source Component ALL ON/PAGE DIP Switch Settings Installation SettingsFIXED/VARIABLE Preamplifier Switch Programming MASTER/SLAVE ModeMaximum Turn on and Source Change Volume Level Volume SettingsALL on Volume Level Volume LevelVideo Sync Selection SOURCE-IN-USE SettingSystem Programming Steps Programming IR CommandsIR Commands LED blinks RED Discrete OFF LED Enter IR Discrete OFF Discrete on Alternate IR Learning Mode IR Command Editing SOURCE-POWER EditingProgram Editing Steps Sequence LED blinks Sequence EditingErasing Individual IR Commands Storing Tuner PresetsProgram Erasing Erasing Individual SequencesSelect Eight Master Keys ZR-8630AV System AccessoriesSync Accessories ZR-8630AV System AccessoriesTroubleshooting the ZR-8630AV TroubleshootingSystem Installation Troubleshooting Tuner Section SpecificationsAM USA/CANADA GeneralPage Page Niles Audio Corporation

ZR-8630AVZR-8630AV specifications

The Niles Audio ZR-8630AV is a sophisticated multi-room audio distribution system designed to deliver high-quality sound throughout your home. Ideal for both residential and light commercial applications, this system enables seamless integration of audio sources, providing a versatile solution for music lovers and entertainment enthusiasts alike.

One of the standout features of the ZR-8630AV is its ability to support eight zones, each of which can independently control audio playback. This flexibility allows users to customize their listening experience in various rooms, ensuring that everyone can enjoy their preferred music at their desired volume. The system can drive up to 30 watts of power per channel, making it suitable for a wide range of speakers, from low-impedance models to high-efficiency types.

The ZR-8630AV is equipped with advanced technology that enhances its performance. One of the key technologies is the proprietary Niles Intelli-Volume technology, which automatically adjusts volume levels based on the audio source and conditions. This feature ensures consistent sound quality across different zones, providing an optimal listening experience.

This audio distribution system also features a user-friendly, intuitive interface that simplifies operation. The built-in IR receiver allows for remote control from various devices, while the easy-to-navigate menu makes it simple to select sources and adjust settings. Additionally, the ZR-8630AV is compatible with third-party control systems, enhancing its integration capabilities in home automation setups.

Another notable characteristic is the ZR-8630AV's ability to connect multiple audio sources, including CD players, satellite receivers, and streaming services. This connectivity ensures users have endless options for their listening pleasure. It prominently features composite and optical digital inputs, making it versatile regarding the types of sources it can accommodate.

Moreover, the ZR-8630AV incorporates high-quality digital-to-analog converters, ensuring that sound reproduction remains pristine and true to the original recording. This focus on audio fidelity makes it a popular choice for audiophiles who refuse to compromise on sound quality.

In summary, the Niles Audio ZR-8630AV is a powerful multi-room audio distribution system that combines exceptional sound quality, advanced features, and seamless connectivity. Its ability to serve multiple zones in a unified manner, coupled with user-friendly controls and compatibility with various audio sources, positions it as a leading choice for anyone looking to create the perfect audio environment in their home.
Top Page Image Contents