Niles Audio ZR-8630AVZR-8630AV manual Sequence Editing, Sequence LED blinks

Page 78
PROGRAM EDITING STEPS

Edit IR Commands for Source 6: Tap the NEXT but-

Step 3 - Using the source component's factory remote,

ton until the SOURCE 5/6 LED is GREEN, and the IR

teach the IR command. The ENTER IR LED turns off.

COMMANDS LED blinks.

Step 4 - Immediately after capturing the IR command,

 

Skip to Step 2.

test it by pressing the TEST IR button. If the source

Edit IR Commands for Source 7: Tap the NEXT but-

component does not respond correctly to the IR com-

mand, try reteaching the command at various dis-

ton until the SOURCE 7/8 LED is RED, and the IR

tances from a half-inch (roughly a centimeter and a

COMMANDS LED blinks.

quarter) to three feet (almost a meter).

Skip to Step 2.

Step 5 - Repeat all steps until you have taught all of

Edit IR Commands for Source 8: Tap the NEXT but-

the source-component IR commands.

ton until the SOURCE 7/8 LED is GREEN, and the IR

Step 6 - Tap the PROGRAM button to exit program-

COMMANDS LED blinks.

ming.

Skip to Step 2.

 

Step 2 - Press a Function Button on the Niles R-8

 

Remote that corresponds to the source-component IR

 

command you wish to teach. The ENTER IR LED

 

lights red.

 

 

 

SEQUENCE EDITING

To program the control sequences for the source components:

Step 1 - Press and hold the PROGRAM button.

The PROGRAM LED lights, the TUNER 1/2 LED lights, the SEQUENCE LED blinks, and the ENTER IR LED is on.

Edit a sequence for Source 3: Tap the NEXT button until the SOURCE 3/4 LED is RED, and the SEQUENCE LED blinks.

Skip to Step 2.

Edit a sequence for Source 4: Tap the NEXT button until the SOURCE 3/4 LED is GREEN, and the SEQUENCE LED blinks.

Skip to Step 2.

Edit a sequence for Source 5: Tap the NEXT button until the SOURCE 5/6 LED is RED, and the SEQUENCE LED blinks.

Skip to Step 2.

Edit a sequence for Source 6: Tap the NEXT button until the SOURCE 5/6 LED is GREEN, and the

SEQUENCE LED blinks.

Skip to Step 2.

Edit a sequence for Source 7: Tap the NEXT button until the SOURCE 7/8 LED is RED, and the SEQUENCE LED blinks.

Skip to Step 2.

Edit a sequence for Source 8: Tap the NEXT button until the SOURCE 7/8 LED is GREEN, and the SEQUENCE LED blinks.

Skip to Step 2.

Step 2 - Press the keys on the Niles R-8 Remote that correspond to the commands you wish to include in the sequence.

Enter commands and delays in the order you wish them to occur. The sequence may include as many as 64 commands and/or delays. To include a delay, use the Volume + key (1 second) or Volume - key (.5 sec- ond). The ENTER IR LED blinks when it receives a command.

Step 3 - Tap the PROGRAM button to exit program- ming.

70

Page 77 Page 79
Image 78
Page 77 Page 79
Contents ZR-8630AV Table of Contents CongratulationsChoosing a Synchronization Method Table of Contents Programming a Home Theater Remote Control to Operate Introduction Central Intelligence Features and BenefitsMulti-Zone/Multi-Source Elegant and Intuitive User Interfaces12V Control Output System-Wide OperationPaging Input for Telephone Systems Expandable for Larger Multi-Zone SystemsLED Zone ON/OFF Indicator Parts Guide ZR-8630AVLED Zone ON/OFF Indicators Zone OFF Button Parts Guide R-8 Remote IncludedSource Buttons Zone Mute ButtonZone OFF Key Volume KeysMaster Keys Zone Mute KeySystem Configurations Configuration 1 SIX ZonesIntroduction to ZR-8630AV Configurations Keypads, IR Sensors, and Remote ControlsSource Components Video Outputs Source-Component AutomationFlasher Outputs SpeakersConfiguration 2 Adding Zones Using Multiple ZR-8630AV Units Sharing Source Components with Two ZR-8630AV UnitsCD Changer Home Theater Receiver Configuration 4 Integrating AN IR-CONTROLLED Home Theater Distributing Audio and Video SignalsShared Source-Component Control IntelliControl MSU Configuration 6 Multiple Master Keypad Modules in a Zone Configuration 7 Multiple Listening Areas in a Zone Configuration 8 External Amplifier in a Zone for More Power Niles SI-245 Niles SI-245 Configuration 11 System Paging and External Telephone System Zone 6 Master Bedroom Solving the IR Command Conflict if Present Infrared Command CompatibilityTesting for a Possible IR Command Conflict Component CompatibilitySource Components with Separate ON/OFF IR Commands Source Power SynchronizationWhat is SOURCE-POWER SYNCHRONIZATION? Source Components with Latching PowerSOURCE-POWER Synchronization Choosing a Synchronization MethodVideo Sync Voltage Sync Obtaining Voltage SyncLight Sensing Source and Home Theater Sync StatusIf Home Theater has sync Source Components that Require Power SynchronizationLED Sync Status Source Components that Do Not Require SynchronizationOperational Overview Master KEYS/SOURCE ButtonsEvent Master Key/Source Button EventsSource Button EventMaster KEY/SOURCE Button Operation Single-Zone OperationOFF KEY/BUTTON Single-Zone OFF OFF Key EventsOFF KEY/BUTTON Operation System-Wide OFFVolume KEYS/BUTTONS Volume Keys/Buttons OperationMute KEY/BUTTON Mute Key/Button OperationFunction KEYS/BUTTONS Function Keys on the Solo MPre-Programmed Tuner Commands Function Key/Button Operation for the Built-in TunersTuner Display Preset ButtonsFRONT-PANEL Tuner Operation Tuner Select ButtonIdentical Source Components Shared Source ComponentsOperating a System with Multiple ZR-8630AV Units Operating a System Integrated with a Home Theater Operation from the Stereo Zones Provided by the ZR-8630AVOperation from the Home Theater Zone SYSTEM-BUSY Indication SOURCE-IN-USE IndicationPaging Indication Connecting Speaker Wire to the Niles NO-STRIP Connector InstallationPlacement ConnectionsConnecting Accessory Keypads Terminating FOUR-PAIR Twisted CableConnecting IR Sensors Connecting a Sensor using Four-PairTwisted Cable Telephone Paging SOURCE-COMPONENT Home Theater Connecting AN IR Sensor for Local System Control ZR-8630AV Distributed Equipment LocationZR-8630AV Distributed Equipment Location Installer Programming Panel Programming OverviewProgramming Software Programming Documentation Mr. Smith ZR-8630AV Programming WorksheetComponent Brand Component Sync Power ProgrammingMaster KEY Label ModelFunction Keys/Buttons Programming Sequence ProgrammingProgramming a Learning Remote for Zone Operation Off button to turn off the zonesProgramming Overview Programming Overview Zone Step Tuner CommandStep AMPProgramming Worksheet Programming Worksheet Programming Worksheet Source IR Command Single Power IR Command Two Separate on and OFF IR CommandsLatching Power Master KEY LabelSource Component Source Component Source Component FIXED/VARIABLE Preamplifier Switch Installation SettingsALL ON/PAGE DIP Switch Settings Programming MASTER/SLAVE ModeALL on Volume Level Volume SettingsMaximum Turn on and Source Change Volume Level Volume LevelSOURCE-IN-USE Setting Video Sync SelectionProgramming IR Commands System Programming StepsIR Commands LED blinks RED Discrete OFF LED Enter IR Discrete OFF Discrete on Alternate IR Learning Mode SOURCE-POWER Editing IR Command EditingProgram Editing Steps Sequence Editing Sequence LED blinksProgram Erasing Storing Tuner PresetsErasing Individual IR Commands Erasing Individual SequencesZR-8630AV System Accessories Select Eight Master KeysZR-8630AV System Accessories Sync AccessoriesTroubleshooting Troubleshooting the ZR-8630AVSystem Installation Troubleshooting AM USA/CANADA SpecificationsTuner Section GeneralPage Page Niles Audio Corporation

ZR-8630AVZR-8630AV specifications

The Niles Audio ZR-8630AV is a sophisticated multi-room audio distribution system designed to deliver high-quality sound throughout your home. Ideal for both residential and light commercial applications, this system enables seamless integration of audio sources, providing a versatile solution for music lovers and entertainment enthusiasts alike.

One of the standout features of the ZR-8630AV is its ability to support eight zones, each of which can independently control audio playback. This flexibility allows users to customize their listening experience in various rooms, ensuring that everyone can enjoy their preferred music at their desired volume. The system can drive up to 30 watts of power per channel, making it suitable for a wide range of speakers, from low-impedance models to high-efficiency types.

The ZR-8630AV is equipped with advanced technology that enhances its performance. One of the key technologies is the proprietary Niles Intelli-Volume technology, which automatically adjusts volume levels based on the audio source and conditions. This feature ensures consistent sound quality across different zones, providing an optimal listening experience.

This audio distribution system also features a user-friendly, intuitive interface that simplifies operation. The built-in IR receiver allows for remote control from various devices, while the easy-to-navigate menu makes it simple to select sources and adjust settings. Additionally, the ZR-8630AV is compatible with third-party control systems, enhancing its integration capabilities in home automation setups.

Another notable characteristic is the ZR-8630AV's ability to connect multiple audio sources, including CD players, satellite receivers, and streaming services. This connectivity ensures users have endless options for their listening pleasure. It prominently features composite and optical digital inputs, making it versatile regarding the types of sources it can accommodate.

Moreover, the ZR-8630AV incorporates high-quality digital-to-analog converters, ensuring that sound reproduction remains pristine and true to the original recording. This focus on audio fidelity makes it a popular choice for audiophiles who refuse to compromise on sound quality.

In summary, the Niles Audio ZR-8630AV is a powerful multi-room audio distribution system that combines exceptional sound quality, advanced features, and seamless connectivity. Its ability to serve multiple zones in a unified manner, coupled with user-friendly controls and compatibility with various audio sources, positions it as a leading choice for anyone looking to create the perfect audio environment in their home.
Top Page Image Contents