Niles Audio ZR-8630AVZR-8630AV manual Troubleshooting the ZR-8630AV

Page 82

TROUBLESHOOTING

TROUBLESHOOTING THE ZR-8630AV

Problem

Troubleshooting

 

 

 

The receiver has no lights on.

Inspect the AC power cord. Be sure it is inserted firmly into the power-cord

 

socket of the receiver.

 

 

Check the AC power outlet. If possible, plug the ZR-8630AV into an

 

unswitched AC outlet. If the unit is pl ugged into a switched AC outlet, verify

 

that the outlet is switched on and is providing power.

 

If you've checked the cord and the outlet, and you still have no lights, call

 

Niles for service.

 

 

 

The LCD Display shows error

Errors E1 through E6 mean that an internal problem exists and the ZR-8630AV

E1, E2, E3, E4, E5, E6.

requires service.

 

 

 

The LCD Display shows error

Error E7 means one or more of the front-panel control or programming

E7.

buttons is stuck in the depressed position.

 

 

Check each button by pressing and releasing it.

 

 

 

The LCD Display shows error

In an expanded system, one or more of the ZR-8630AV units is not set to the

E8.

proper Master/Slave mode.

 

 

Refer to the Installation Settings of this manual for proper setup.

 

 

 

SYSTEM INSTALLATION TROUBLESHOOTING

 

 

 

 

Problem

Troubleshooting

 

 

 

The keypad is connected, but

Test the keypad cable with an appropriate cable tester.

no lights come on.

 

 

 

 

There is no IR control of the

The sensors may be receiving some interference. Check the Status LED.

source components.

When using the Niles I RR-4D+ Wall Mou nt or the Niles TIR-1+ Tabletop IR

 

 

Sensors, the Status LED should be illuminating

GREEN when the z one is ON.

 

The Status LED should be off when the zone is OFF, and it should be RED

 

when it is receiving a command.

 

 

When using the Niles MS-1 or MS-2 IR Sensors, the Status LED should be off

 

when the zone is ON. It should only illuminate GREEN when receiving an

 

actual IR command.

 

 

If the LEDs stay constantly RED (or GREEN

when using MS-1 or MS-2), that is

 

a sign of interference. Identify the source of interference and remove it, or move

 

the sensor to a place where it doesn't have interference. Sources of interfer-

 

ence may include dimmer switches, fan-motor switches, televisions (especially

 

plasma televisions), and sunlight.

 

 

 

 

Some IR commands work for a

You may have captured some IR commands

incorrectly. To avoid this, test all IR

source and some don't.

commands with the IR test feature as you capture them.

 

 

 

74

Page 81 Page 83
Image 82
Page 81 Page 83
Contents ZR-8630AV Table of Contents CongratulationsChoosing a Synchronization Method Table of Contents Programming a Home Theater Remote Control to Operate Introduction Central Intelligence Features and BenefitsMulti-Zone/Multi-Source Elegant and Intuitive User Interfaces12V Control Output System-Wide OperationPaging Input for Telephone Systems Expandable for Larger Multi-Zone SystemsLED Zone ON/OFF Indicator Parts Guide ZR-8630AVLED Zone ON/OFF Indicators Zone OFF Button Parts Guide R-8 Remote IncludedSource Buttons Zone Mute ButtonZone OFF Key Volume KeysMaster Keys Zone Mute KeySystem Configurations Configuration 1 SIX ZonesKeypads, IR Sensors, and Remote Controls Introduction to ZR-8630AV ConfigurationsSource Components Video Outputs Source-Component AutomationFlasher Outputs SpeakersConfiguration 2 Adding Zones Using Multiple ZR-8630AV Units Sharing Source Components with Two ZR-8630AV UnitsCD Changer Home Theater Receiver Distributing Audio and Video Signals Configuration 4 Integrating AN IR-CONTROLLED Home TheaterShared Source-Component Control IntelliControl MSU Configuration 6 Multiple Master Keypad Modules in a Zone Configuration 7 Multiple Listening Areas in a Zone Configuration 8 External Amplifier in a Zone for More Power Niles SI-245 Niles SI-245 Configuration 11 System Paging and External Telephone System Zone 6 Master Bedroom Solving the IR Command Conflict if Present Infrared Command CompatibilityTesting for a Possible IR Command Conflict Component CompatibilitySource Components with Separate ON/OFF IR Commands Source Power SynchronizationWhat is SOURCE-POWER SYNCHRONIZATION? Source Components with Latching PowerChoosing a Synchronization Method SOURCE-POWER SynchronizationVideo Sync Voltage Sync Obtaining Voltage SyncLight Sensing Source and Home Theater Sync StatusIf Home Theater has sync Source Components that Require Power SynchronizationLED Sync Status Source Components that Do Not Require SynchronizationOperational Overview Master KEYS/SOURCE ButtonsEvent Master Key/Source Button EventsSource Button EventSingle-Zone Operation Master KEY/SOURCE Button OperationOFF KEY/BUTTON Single-Zone OFF OFF Key EventsOFF KEY/BUTTON Operation System-Wide OFFVolume KEYS/BUTTONS Volume Keys/Buttons OperationMute KEY/BUTTON Mute Key/Button OperationFunction KEYS/BUTTONS Function Keys on the Solo MPre-Programmed Tuner Commands Function Key/Button Operation for the Built-in TunersTuner Display Preset ButtonsFRONT-PANEL Tuner Operation Tuner Select ButtonShared Source Components Identical Source ComponentsOperating a System with Multiple ZR-8630AV Units Operation from the Stereo Zones Provided by the ZR-8630AV Operating a System Integrated with a Home TheaterOperation from the Home Theater Zone SOURCE-IN-USE Indication SYSTEM-BUSY IndicationPaging Indication Connecting Speaker Wire to the Niles NO-STRIP Connector InstallationPlacement ConnectionsConnecting Accessory Keypads Terminating FOUR-PAIR Twisted CableConnecting a Sensor using Four-Pair Connecting IR SensorsTwisted Cable Telephone Paging SOURCE-COMPONENT Home Theater Connecting AN IR Sensor for Local System Control ZR-8630AV Distributed Equipment LocationZR-8630AV Distributed Equipment Location Programming Overview Installer Programming PanelProgramming Software Programming Documentation Mr. Smith ZR-8630AV Programming WorksheetComponent Brand Component Sync Power ProgrammingMaster KEY Label ModelFunction Keys/Buttons Programming Sequence ProgrammingProgramming a Learning Remote for Zone Operation Off button to turn off the zonesProgramming Overview Programming Overview Zone Step Tuner CommandStep AMPProgramming Worksheet Programming Worksheet Programming Worksheet Source IR Command Single Power IR Command Two Separate on and OFF IR CommandsLatching Power Master KEY LabelSource Component Source Component Source Component FIXED/VARIABLE Preamplifier Switch Installation SettingsALL ON/PAGE DIP Switch Settings Programming MASTER/SLAVE ModeALL on Volume Level Volume SettingsMaximum Turn on and Source Change Volume Level Volume LevelSOURCE-IN-USE Setting Video Sync SelectionProgramming IR Commands System Programming StepsIR Commands LED blinks RED Discrete OFF LED Enter IR Discrete OFF Discrete on Alternate IR Learning Mode IR Command Editing SOURCE-POWER EditingProgram Editing Steps Sequence Editing Sequence LED blinksProgram Erasing Storing Tuner PresetsErasing Individual IR Commands Erasing Individual SequencesZR-8630AV System Accessories Select Eight Master KeysZR-8630AV System Accessories Sync AccessoriesTroubleshooting the ZR-8630AV TroubleshootingSystem Installation Troubleshooting AM USA/CANADA SpecificationsTuner Section GeneralPage Page Niles Audio Corporation

ZR-8630AVZR-8630AV specifications

The Niles Audio ZR-8630AV is a sophisticated multi-room audio distribution system designed to deliver high-quality sound throughout your home. Ideal for both residential and light commercial applications, this system enables seamless integration of audio sources, providing a versatile solution for music lovers and entertainment enthusiasts alike.

One of the standout features of the ZR-8630AV is its ability to support eight zones, each of which can independently control audio playback. This flexibility allows users to customize their listening experience in various rooms, ensuring that everyone can enjoy their preferred music at their desired volume. The system can drive up to 30 watts of power per channel, making it suitable for a wide range of speakers, from low-impedance models to high-efficiency types.

The ZR-8630AV is equipped with advanced technology that enhances its performance. One of the key technologies is the proprietary Niles Intelli-Volume technology, which automatically adjusts volume levels based on the audio source and conditions. This feature ensures consistent sound quality across different zones, providing an optimal listening experience.

This audio distribution system also features a user-friendly, intuitive interface that simplifies operation. The built-in IR receiver allows for remote control from various devices, while the easy-to-navigate menu makes it simple to select sources and adjust settings. Additionally, the ZR-8630AV is compatible with third-party control systems, enhancing its integration capabilities in home automation setups.

Another notable characteristic is the ZR-8630AV's ability to connect multiple audio sources, including CD players, satellite receivers, and streaming services. This connectivity ensures users have endless options for their listening pleasure. It prominently features composite and optical digital inputs, making it versatile regarding the types of sources it can accommodate.

Moreover, the ZR-8630AV incorporates high-quality digital-to-analog converters, ensuring that sound reproduction remains pristine and true to the original recording. This focus on audio fidelity makes it a popular choice for audiophiles who refuse to compromise on sound quality.

In summary, the Niles Audio ZR-8630AV is a powerful multi-room audio distribution system that combines exceptional sound quality, advanced features, and seamless connectivity. Its ability to serve multiple zones in a unified manner, coupled with user-friendly controls and compatibility with various audio sources, positions it as a leading choice for anyone looking to create the perfect audio environment in their home.
Top Page Image Contents