Draft | Hearth and Home Technologies RUTHERFORD-42 manual

B. Design and Installation Considerations

NOTICE: Check building codes prior to installation.

•Installation MUST comply with local, regional, state and national codes and regulations.

•Consult insurance carrier, local building inspector, ﬁre ofﬁcials or authorities having jurisdiction over restrictions, installation inspection and permits.

Before installing, determine the following:

•Where the ﬁreplace is to be installed.

•The vent system conﬁguration to be used.

•Gas supply piping.

•Framing and ﬁnishing details.

•Whether optional accessories are desired.

C. Draft

Draft is the pressure difference needed to vent ﬁreplaces successfully. When a ﬁreplace is drafting successfully, all combustion by-products are exiting the home through the chimney.

Considerations for successful draft include:

•Preventing negative pressure

•Location of ﬁreplace and chimney

NOTICE: Hearth & Home Technologies assumes no responsibility for the improper performance of the ﬁreplace system caused by:

•Inadequate draft due to environmental conditions

•Downdrafts

•Tight sealing construction of the structure

•Mechanical exhausting devices

•Improper positioning of the chimney in a not-recommended location on the roof.

D. Negative Pressure

WARNING! Risk of Asphyxiation! Negative pressure can cause spillage of combustion fumes and soot. Fire must draft properly for safe operation.

Negative pressure results from the imbalance of air avail- able for the ﬁreplace to operate properly. It can be stron- gest in lower levels of the house.

Causes include:

•Exhaust fans (kitchen, bath, etc.)

•Range hoods

•Combustion air requirements for furnaces, water heaters and other combustion appliances

•Clothes dryers

•Location of return-air vents to furnace or air conditioning

•Imbalances of the HVAC air handling system

•Upper level air leaks such as:

-Recessed lighting

-Attic hatch

-Duct leaks

To minimize the effects of negative air pressure:

•Ensure adequate outdoor air for all combustion appliances and exhaust equipment

•Ensure furnace and air conditioning return vents are not located in the immediate vicinity of the ﬁreplace

•Avoid installing the ﬁreplace near doors, walkways or small isolated spaces

•Recessed lighting should be a “sealed can” design

•Attic hatches weather stripped or sealed

•Attic mounted duct work and air handler joints and seams taped or sealed

•Basement installations should be avoided

NOTICE: The fireplace provides some outside air for combustion. Other methods may be necessary if more air is required.

NOTICE: Hearth & Home Technologies Inc. recommends the use of direct vent appliances in basements.

Heat & Glo • RUTHERFORD-42 • 4059-309 Rev G • 11/08

RUTHERFORD-42 specifications

Hearth and Home Technologies presents the RUTHERFORD-42, an exceptional gas fireplace that combines sophisticated design with advanced functionality. This model signifies the perfect blend of aesthetics and performance, making it a favored choice for homeowners seeking to enhance their living spaces with the warmth and comfort of a fireplace.

One of the primary features of the RUTHERFORD-42 is its impressive viewing area, measuring 42 inches wide. This expansive glassfront design offers a stunning visual display of the flames, creating a cozy ambiance that enhances any room. The fireplace is framed with a stylish surround that can be customized to match various interior styles, adding a touch of elegance to contemporary and traditional homes alike.

Equipped with advanced technology, the RUTHERFORD-42 ensures efficient heat output while maintaining ease of use. The fireplace features an electronic ignition system that provides reliability and convenience with a simple push-button start. Additionally, it incorporates a thermostat remote control, allowing users to easily regulate the temperature from anywhere in the room. This functionality not only enhances user comfort but also improves energy efficiency.

The unit is designed with a powerful yet quiet fan that circulates warm air throughout the space, ensuring even heat distribution. This makes the RUTHERFORD-42 an excellent option for supplemental heating in larger rooms, providing both style and warmth during colder months.

Safety is a paramount concern in all Hearth and Home Technologies products, and the RUTHERFORD-42 is no exception. It includes safety screens that protect against accidental contact with the flames, ensuring peace of mind while enjoying the fire’s warmth. Furthermore, it complies with stringent safety standards, making it a reliable choice for families.

In terms of aesthetics, the RUTHERFORD-42 offers various media options, including glass, ceramic logs, and stone, allowing homeowners to personalize the fire's appearance to align with their home’s décor. The fireplace is also available in different finishes, giving users the flexibility to create a focal point that perfectly complements their interior design.

Overall, the Hearth and Home Technologies RUTHERFORD-42 is a standout model that combines cutting-edge technology, safety features, and design flexibility, making it an excellent choice for anyone looking to add a stylish and functional gas fireplace to their home.