Hearth and Home Technologies TIARA II-B, TIARAI-CES owner manual What to do if you smell gas

Page 1

Owner’s Manual

Installation and Operation

TIARA I-B

TIARA II-B

DIRECT VENT ROOM HEATER

Tested and

O-T L

Portland

Listed by

Oregon USA

 

C

US

OMNI-Test Laboratories, Inc.

Models:

TIARAI-BK-B TIARAII-BK-B TIARAI-BR-B TIARAII-BR-B

TIARAI-CTO TIARAII-CTO

TIARAI-CES TIARAII-CES

CAUTION

DO NOT DISCARD THIS MANUAL

• Important operating and •

Read, understand and

• Leave this manual with

maintenance instructions

follow these instructions

party responsible for use

included.

for safe installation and

and operation.

 

operation.

 

DO DISCARDNOT

WARNING: If the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury, or death.

Do not store or use gasoline or other flam- mable vapors and liquids in the vicinity of this or any other appliance.

What to do if you smell gas

-Do not try to light any appliance. Do not touch any electrical switch. Do not use any phone in your building.

-Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

-If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

Installation and service of this appliance should be performed by qualified personnel. Hearth & Home Technologies suggests NFI certified or factory-trained professionals, or technicians supervised by an NFI certified professional.

WARNING

HOT SURFACES!

Glass and other surfaces are hot during operation AND cool down.

Hot glass will cause burns.

Do not touch glass until it is cooled

NEVER allow children to touch glass

Keep children away

CAREFULLY SUPERVISE children in the same room as appliance

Alert children and adults to hazards of high

temperatures

High temperatures may ignite clothing or other flammable materials.

Keep clothing, furniture, draperies and other combustibles away.

In the Commonwealth of Massachusetts:

installation must be performed by a licensed plumber or gas fitter.

See Table of Contents for additional Commonwealth of Mas- sachusetts requirements.

This appliance may be installed as an OEM installation in manufactured home (USA only) or mobile home and must be installed in accordance with the manufacturer's instructions and the manufactured home construction and safety standard, Title 24 CFR, Part 3280 or Standard for Installation in Mobile Homes, CAN/CSA Z240MH.

This appliance is only for use with the type(s) of gas indicated on the rating plate.

7010-149M

August 1, 2008

Image 1
Contents What to do if you smell gas Installation and OperationHot glass will cause burns Location Hang tag attached to rear of appliance CongratulationsTable of Contents 1Listing and Code Approvals Requirements for the Commonwealth of Massachusetts Tools will apply to every installation Design & Installation ConsiderationsGetting Started Tools and Supplies NeededSelecting Appliance Location Appliance Location and ClearancesClearances to Combustibles Tiara I-B ModelTiara II B Clearances to Combustibles Tiara II-BVent Termination Minimum Clearances 4Termination LocationsAlcove Applications Venting Components Vent InformationUse of Elbows Measuring StandardsHow to Use the Vent Graph Step Horizontal Termination203mm Vinyl Siding Direct Vent Pipe Vertical TerminationStep Twist-lock the vent cap and seal Level Cathedral Ceiling Support Box Cathedral CeilingClass a Metal Chimney Type a & B Co-Axial to Co-Linear Type C Up & Out Installation Type D Hearth MountExisting Masonry Chimney Cut and bend flashing as needed to fit Sealant adhesive Flex Liner Flex Coupler Sheet Metal Screws Fuel Conversions Gas InformationConverting to LP Gas Tiara I-B Burner RemovalTiara I-B and Tiara II-B Valve Regulator ReplacementTiara I-B 063 106 Tiara II-B 073 120 Screws Rubber Gasket Identification Label F Gas PressuresCheck for GAS Leaks Gas ConnectionConnecting to the Appliance Recommendation for WireStanding Pilot Ignition System Wiring Wire Size Max. LengthIgnition Module Access and Battery Replacement Remove Shipping Materials Appliance SetupTop to Rear Vent Conversion Top Vent Installations Damper AdjustmentRear Vent Installations Installing the Baffle Tiara I-B Shutter AdjustmentBrick Installation Tiara II-B Leg Leveling SystemPositioning the Logs Tiara I-B 19 Complete brick installationPositioning the Logs Tiara II-B Embers AccessoriesMineral Wool Wing NUT Optional BlowerLock NUT Stem Glass Replacement Warming Shelves InstallationBefore Lighting Appliance Operating InstructionsControls Lighting Appliance For Your Safety Read Before LightingInitial Break-in Procedure Frequently Asked QuestionsAfter Appliance is Lit Symptom Possible Cause Corrective Action TroubleshootingBe Placed in this Opening After servicing Maintaining and Servicing ApplianceNecessary. USE Caution When CLEANING/HANDLING Ceramic Burner Maintenance Tasks InspectReference Materials Appliance Dimension Diagram Tiara I-BAppliance Dimension Diagram Tiara II-B SLP4M SLP6AM SLP24M SLP36M SLP48M Vent Components DiagramHHT SL-P Vent Components ListTermination Caps & Kits Description Tiara I-BService Parts List cont’d PBE-5 Accessories Tiara I-B Tiara II-B LPK-T2 Tiara II-B Accessories Tiara II-B Limited Lifetime Warranty Heat & GLO GAS Appliance Products Warranty PolicyHomeowner’s Notes Contact Information Tiara I B Tiara II BDealer Telephone

TIARAI-CTO, TIARAI-BK-B, TIARA II-B, TIARAI-BR-B, TIARAI-CES specifications

Hearth and Home Technologies offers a range of innovative gas and wood fireplace products, including the TIARA I-B, TIARA I-CTO, TIARA I-CES, TIARA II-B, and TIARA I-BR-B models. Each of these fireplaces combines aesthetic appeal with high functionality, creating a comfortable and stylish heating solution for any space.

The TIARA I-B is a versatile gas fireplace that features a contemporary design, perfect for modern homes. It comes with a large viewing area that showcases the beautiful flames while providing efficient heating. The model is equipped with advanced gas burner technology, ensuring a steady and even flame pattern, which enhances both the ambiance and warmth of the room.

The TIARA I-CTO boasts an innovative convection technology option, which allows for even heat distribution throughout the space. This model includes an easy-to-use remote control that enables users to adjust the flame height and heat output from across the room, providing an unparalleled level of convenience. Its sleek design can seamlessly blend into various interiors, making it a stylish choice for homeowners.

For those looking for a more efficient heating solution, the TIARA I-CES model incorporates a ceramic glass panel that enhances the fireplace's efficiency while maintaining an attractive aesthetic. The improved thermal performance allows for reduced fuel consumption and lower heating costs without compromising on warmth or style.

The TIARA II-B enhances the collection with its distinctive design and expanded features. This model comes with various decorative options, including multiple log set styles and media kits, allowing homeowners to customize their fireplace to match their unique taste. Its durable construction ensures longevity and reliability while providing warmth in colder months.

Finally, the TIARA I-BR-B is designed with a traditional aesthetic but incorporates modern technology. It delivers exceptional efficiency with the use of high-quality materials and advanced combustion technology. This fireplace not only provides a classic look but also meets modern energy efficiency standards, making it an eco-friendly choice for responsible heating.

In summary, the TIARA series from Hearth and Home Technologies combines beauty, technology, and efficiency. Each model is designed to suit different preferences and needs, ensuring that homeowners find the perfect fireplace solution. Whether you are after modern design or classic charm, the TIARA fireplaces deliver warmth and style in equal measure.