Hearth and Home Technologies SL-750TV-IPI-D Vent Information and Diagrams, Vent Guidelines

Page 13

5 Vent Information and Diagrams

A. Vent Guidelines

 

Rise to Run Ratio = 2:1

WARNING

 

Maximum Total Horizontal Run = 15 Feet

 

Minimum Total Vertical Rise = 9 Feet

Fire Risk.

 

Maximum Total Vertical Rise = 30 Feet

 

Maximum Number of Elbows: Two 900 or Four 450

Asphyxiation Risk.

 

 

 

This appliance requires the specified pipe for

 

operation.

 

 

• Incorrect pipe may cause spillage, condensation

MINIMUM CLEARANCES

and overheating.

 

 

ARE PER VENT

 

 

MANUFACTURER’S

These models require the following size B-vent double

SPECIFICATIONS

 

wall, or single wall rigid or flex vent pipe.

 

 

Models

Pipe Size

9 FEET

SL-550TV-D, SL-550TV-IPI-D

5 inches

MINIMUM

SL-750TV-D, SL-750TV-IPI-D

5 inches

 

SL-950TV-D, SL-950TV-IPI-D

6 inches

 

• B-vent pipe MUST be used when the vent system is

VENT SUPPORTS ARE PER

within combustible construction.

 

VENT MANUFACTURER’S

 

 

SPECIFICATIONS

•Single wall rigid or flexible vent may be used ONLY if the vent system is installed within non-combustible construction such as a masonry chimney.

•Follow pipe manufacturer’s installation guidelines when installing the appliance.

WARNING

Figure 5.1

 

 

Fire Hazard.

 

 

 

Explosion Risk.

 

 

 

Asphyxiation Risk.

 

 

 

Do NOT connect this gas appliance to a

 

 

 

chimney flue serving a separate solid-fuel or

VENT SUPPORTS

 

 

gas burning appliance.

 

 

ARE PER VENT

 

 

• Vent this appliance directly outside.

MANUFACTURER'S

METAL

 

• Use separate vent system for this appliance.

SPECIFICATIONS.

PLUMBERS' STRAP

 

 

 

 

May impair safe operation of this appliance or

 

 

 

other appliances connected to the flue.

 

 

B. Vent System Configuration

MAXIMUM HORIZONTAL RUN IS 50%

 

 

OF VERTICAL. HORIZONTAL RUN

 

CAUTION

CANNOT BE MORE THAN 15 FT.

 

 

 

ALL vent configuration specifications MUST be followed.

 

 

•

This product is tested and listed to appliance and vent

 

 

 

manufacturer’s specifications.

 

 

• Appliance performance will suffer if specifications are not

 

 

 

followed.

Figure 5.2

 

 

Heat & Glo • SL-550 / 750 / 950TV-D • 2053-985 Rev. H • 9/06

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents What to do if you smell gas Homeowner Reference Information CongratulationsTable of Contents Glass Specifications 1Listing and Code ApprovalsBTU Specifications ModelsNon-Combustible Materials Specification High Altitude InstallationsCombustible Materials Specification Getting Started Design and Installation ConsiderationsNegative Pressure Inspect Appliance and Components Tools and Supplies NeededSelecting Appliance Location Framing and Clearances Clearances Constructing the Appliance ChaseClearances to Mantels or other Combustibles above Appliance Mantel ProjectionsVent Termination Minimum Clearances Termination LocationsVent Guidelines Vent Information and DiagramsVent System Configuration Minimum Vertical Feet Pipe Clearances to Combustibles Vent Clearances and FramingVertical Penetration Framing Appliance Preparation Installing Outside Air Kit Damper AssemblyGas and Electrical Connections Proper Positioning, Leveling and Securing of a Securing and Leveling ApplianceAssembly of Vent Sections Installing Vent PipeSecuring Vent Sections Attaching Vent to FireboxFuel Conversions Gas Connection Gas InformationGas Pressures Pressure Natural Gas PropaneHigh Altitude Installations Connecting to the Appliance Recommendation for WireIntellifire Ignition System Wiring Optional Accessories RequirementsGround to Standing Pilot Ignition System WiringWall Switch Installation for Fan Optional Junction Box InstallationFacing Material FinishingClean the Appliance Appliance SetupAccessories Remove Shipping MaterialsPositioning the Logs Log Set Assembly LOGS-SL550-D Models SL-550TV-DTAB Locator Log Set Assembly LOGS-SL750-D Models SL-750TV-D, SL-950TV-D Notches Raised Flat Spots Shutter Settings Glass AssemblyScreen Mesh Grilles and TrimBefore Lighting Appliance Operating InstructionsCheck Appliance Draft Before operating this appliance have a qualified technicianIntellifire Ignition Lighting ApplianceStanding Pilot Ignition For Your Safety Read Before Lighting InstructionsInitial Break-in Procedure Frequently Asked QuestionsAfter Appliance is Lit Symptom Possible Causes Corrective Actions TroubleshootingStanding Pilot Ignition System Symptom Possible Cause Corrective Action TroubleshootingIntellifire Ignition System Symptom Possible Causes Corrective Actions Before servicing Maintaining and Servicing ApplianceInspect Maintenance Tasks Appliance Dimensions Table Appliance Dimension DiagramReference Materials Log Set Assembly Service PartsAdditional service part numbers may appear on the following Service Parts ListSL-750TV-D SL-750TV-D 151 SL-950TV-DSL-950TV-D SL-550 / 750 / 950TV-D-IPI Common Parts Serial # Part Number SL-550 / 750 / 950TV-D 10-06 530-510A Limited Lifetime Warranty Heat & GLO GAS Appliance Products Limited Lifetime WarrantyDo not Discard this Manual Contact Information
Top Page Image Contents