Hearth and Home Technologies SL-350TRS-CE-D manual Placing the Ember Material, Glass Assembly

Page 38

6

6

LOG #6 (SRV540-704):Place log #6 against the second and third grate bars.

If sooting occurs, the logs might need to be repositioned slightly to avoid excessive flame impingement.

Placing the Ember Material

Ember material is shipped with this gas fireplace. The bag labeled Glowing Ember (050-721) is standard glowing ember material. To place the ember material:

Remove latches and tension springs around the glass door.

Remove the glass door from the unit (Figure 44).

Place small pieces of ember material on burner top around burner ports (Figure 33). Do NOT press embers into burner ports. Cover the top of the burner with a single layer of ember material. Do NOT place embers behind the rear port row as noted in Figure 45.

Save the remaining ember materials for use during fireplace servicing.

Replace the glass door and a front trim door on the unit (see Replacement Parts Section of the manual.)

Replace the latches and tension springs.

LATCHES

(BOTH TOP AND BOTTOM)

GLASS

ASSEMBLY

Figure 44. Glass Assembly

DO NOT PLACE EMBERS BEHIND THE REAR BURNER PORTS.

Figure 45. Placement of the Ember Material

38

Heat & Glo • SL-350TRS-CE-D2033-900 Rev. N • 10/07

Image 38
Contents Installers Guide What to do if you smell gasSafety and Warning Information Table of Contents Service Parts SL-350TRS-CE-DNG, LP Service Parts List SL-350TRS-CE-DSL-350TRS-CE-D Appliance Certification Installation RegulationsApprovals and Regulations Advantica Gas Fireplace 90/396/EECGetting Started Diagram of the SL-350TRS-CE-D Recessed Depth 41.3cm Installing the FireplaceClearance Requirements Step Framing Fireplace SectionsFlue System Approvals Identifying Flue ComponentsDVP90ST SL D-Series Flue Component Specifications 102mm inner pipe/168mm outer pipeUse SL D-Series Components only Use DVP-SeriesFlue with One 90 Elbow Use DVP-Series components only Flue with Two 90 ElbowsFlue with TWO 2 90 Elbows Flue with three 90 elbows USE SL D-SERIES Components only Appliance Preparation Top FlueRear Flue Remove the insulation from the outer flue pipeInstalling Flue Components Install Support BracketsInstall Firestops Installing Support BracketsFlue Pipe & Firestop Hole and New Framing MembersFlue Termination For Horizontal Terminations using the SLK-01DA Arrow is Pointing UPTermination cap This also pertains to vertical flue systems installed Vent Termination Minimum Clearances Step Gas Control System Gas Control SystemStep Gas Supply Line Do not USE AN Open Flame to Check for GAS LeaksStep Gas Pressure Requirements Step Wiring FireplaceFor Standing Pilot Ignition Wiring Appliance Requirements Standing Pilot Ignition Wiring Diagram Step FinishingStep Installing Trim Logs, Ember Material Sealant Material Installing the TrimLOG Placement Heat & Glo SL-350TRS-CE-D 2033-900 Rev. N 10/07 Glass Assembly Placing the Ember MaterialDouble-check for faulty components Step Before Lighting Fireplace After InstallationReview safety warnings and cautions Double-check for gas leaksFireplace Maintenance Maintaining Servicing Your FireplaceBurner Flame Patterns Standing Pilot Troubleshooting Trouble- shootingCheck the thermopile with a millivolt Placed in this Opening

SL-350TRS-CE-D specifications

Hearth and Home Technologies has consistently delivered innovative and efficient heating solutions, and the SL-350TRS-CE-D is yet another remarkable addition to their lineup. This contemporary gas fireplace combines advanced technology with a sleek design, making it a popular choice for modern homes seeking both aesthetics and functionality.

One of the standout features of the SL-350TRS-CE-D is its impressive heat output. With a maximum input of 35,000 BTUs, this fireplace is capable of heating up to 1,400 square feet, ensuring cozy warmth throughout your living space. The unit employs a powerful fan system that enhances heat distribution, allowing for a comfortable environment on even the coldest days.

In terms of design, the SL-350TRS-CE-D boasts a linear configuration that creates a stunning focal point in any room. Its clean face design without visible vents allows for seamless integration into various interior styles, from minimalist to contemporary. The large glass viewing area provides an unobstructed view of the flame, inviting warmth and ambiance into your home.

The SL-350TRS-CE-D is equipped with advanced technologies that enhance its performance and user experience. It features an electronic ignition system, which ensures quick and reliable ignition, eliminating the hassle of matches or lighters. Additionally, the fireplace comes with a remote control, allowing users to easily adjust the flame height and heat output from the comfort of their seat.

Safety is also a priority with the SL-350TRS-CE-D. The unit includes a safety screen that prevents accidental contact with hot surfaces, making it an ideal choice for homes with children and pets. Moreover, the fireplace is designed with sealed combustion technology, which draws air from outside for combustion, ensuring that indoor air quality remains unaffected.

With its energy efficiency, the SL-350TRS-CE-D operates with a high efficiency rating, making it an environmentally friendly heating option. This not only helps reduce heating costs but also contributes to a sustainable lifestyle.

In conclusion, the Hearth and Home Technologies SL-350TRS-CE-D is a blend of cutting-edge technology, efficient performance, and captivating design. It is an ideal choice for those looking to enhance their living space with a modern gas fireplace that delivers comfort, safety, and style. Whether you're gathering with family or entertaining guests, the SL-350TRS-CE-D provides warmth and ambiance that will be appreciated throughout the cold months.