Hearth and Home Technologies SL-350TRS-CE-D manual Arrow is Pointing UP

Page 27

The heat shield sections will overlap to match the wall thickness (depth). The small leg in the shield rests on top of the flue to properly space it from the pipe section (see Figure 34).

Interior

Rear Vent

Wall Shield

Heat Shield

 

38mm min.

 

overlap

Outer Flue

 

Inner Flue

38mm min.

 

 

Overlap

INTERIOR

EXTERIOR

 

FIGURE 34. Venting through the Wall

The termination kit should pass through the wall firestops from the exterior of the building.

Adjust the termination cap to its final exterior position on the building and interlock the flue sections.

WARNING: THE TERMINATION CAP ! MUST BE POSITIONED SO THAT THE

ARROW IS POINTING UP.

• Use a high-temperature sealant gasket to seal between the pipe and exterior firestop.

For Horizontal Terminations using the SLK-01DA

To attach and secure the termination to the last section of horizontal flue:

Rotate and interlock the ends as described at the begin- ning of the Installing Flue Components section.

The termination kit should pass through the wall firestops from the exterior of the building.

Adjust the termination cap to its final exterior position on the building.

WARNING: THE TERMINATION CAP MUST BE ! POSITIONED SO THAT THE ARROW IS

POINTING UP.

• Use the exterior pipelock hole provided on the round flange of the wall firestop to secure the flue pipe in place.

• Use a high-temperature sealant or fiberglass rope gas- ket to seal between the pipe and exterior firestop.

• See Figure 37 for flue termination clearances.

Heat & Glo • SL-350TRS-CE-D2033-900 Rev. N • 10/07

27

Image 27
Contents What to do if you smell gas Installers GuideSafety and Warning Information Table of Contents SL-350TRS-CE-D Service PartsSL-350TRS-CE-D NG, LP Service Parts ListSL-350TRS-CE-D Advantica Gas Fireplace 90/396/EEC Installation RegulationsApprovals and Regulations Appliance CertificationGetting Started Diagram of the SL-350TRS-CE-D Installing the Fireplace Clearance RequirementsRecessed Depth 41.3cm Sections Step Framing FireplaceIdentifying Flue Components Flue System ApprovalsDVP90ST 102mm inner pipe/168mm outer pipe SL D-Series Flue Component SpecificationsUse DVP-Series Use SL D-Series Components onlyFlue with One 90 Elbow Flue with Two 90 Elbows Use DVP-Series components onlyFlue with TWO 2 90 Elbows Flue with three 90 elbows USE SL D-SERIES Components only Top Flue Appliance PreparationRemove the insulation from the outer flue pipe Rear FlueInstall Support Brackets Installing Flue ComponentsInstalling Support Brackets Install FirestopsHole and New Framing Members Flue Pipe & FirestopFlue Termination Arrow is Pointing UP For Horizontal Terminations using the SLK-01DATermination cap This also pertains to vertical flue systems installed Vent Termination Minimum Clearances Gas Control System Step Gas Control SystemDo not USE AN Open Flame to Check for GAS Leaks Step Gas Supply LineStep Wiring Fireplace For Standing Pilot Ignition Wiring Appliance RequirementsStep Gas Pressure Requirements Step Finishing Standing Pilot Ignition Wiring DiagramSealant Material Installing the Trim Step Installing Trim Logs, Ember MaterialLOG Placement Heat & Glo SL-350TRS-CE-D 2033-900 Rev. N 10/07 Placing the Ember Material Glass AssemblyDouble-check for gas leaks Step Before Lighting Fireplace After InstallationReview safety warnings and cautions Double-check for faulty componentsMaintaining Servicing Your Fireplace Fireplace MaintenanceBurner Flame Patterns Trouble- shooting Standing Pilot TroubleshootingCheck the thermopile with a millivolt Placed in this Opening

SL-350TRS-CE-D specifications

Hearth and Home Technologies has consistently delivered innovative and efficient heating solutions, and the SL-350TRS-CE-D is yet another remarkable addition to their lineup. This contemporary gas fireplace combines advanced technology with a sleek design, making it a popular choice for modern homes seeking both aesthetics and functionality.

One of the standout features of the SL-350TRS-CE-D is its impressive heat output. With a maximum input of 35,000 BTUs, this fireplace is capable of heating up to 1,400 square feet, ensuring cozy warmth throughout your living space. The unit employs a powerful fan system that enhances heat distribution, allowing for a comfortable environment on even the coldest days.

In terms of design, the SL-350TRS-CE-D boasts a linear configuration that creates a stunning focal point in any room. Its clean face design without visible vents allows for seamless integration into various interior styles, from minimalist to contemporary. The large glass viewing area provides an unobstructed view of the flame, inviting warmth and ambiance into your home.

The SL-350TRS-CE-D is equipped with advanced technologies that enhance its performance and user experience. It features an electronic ignition system, which ensures quick and reliable ignition, eliminating the hassle of matches or lighters. Additionally, the fireplace comes with a remote control, allowing users to easily adjust the flame height and heat output from the comfort of their seat.

Safety is also a priority with the SL-350TRS-CE-D. The unit includes a safety screen that prevents accidental contact with hot surfaces, making it an ideal choice for homes with children and pets. Moreover, the fireplace is designed with sealed combustion technology, which draws air from outside for combustion, ensuring that indoor air quality remains unaffected.

With its energy efficiency, the SL-350TRS-CE-D operates with a high efficiency rating, making it an environmentally friendly heating option. This not only helps reduce heating costs but also contributes to a sustainable lifestyle.

In conclusion, the Hearth and Home Technologies SL-350TRS-CE-D is a blend of cutting-edge technology, efficient performance, and captivating design. It is an ideal choice for those looking to enhance their living space with a modern gas fireplace that delivers comfort, safety, and style. Whether you're gathering with family or entertaining guests, the SL-350TRS-CE-D provides warmth and ambiance that will be appreciated throughout the cold months.